Latest activity

What's new Featured content New posts New profile posts Latest activity
  • D
    DocMAX replied to the thread /run/pve ??.
    yeah, thanks for the warning. pve is probably for enterprise use. but i use it just for home enternainment. it's perfect for launching VMs on different machines @home since gpu passthough is supported (which is probably not meant as a enterprise...
  • U
    uzumo replied to the thread GPU Passthrough not respecting secondary GPU.
    If it still becomes vfio-pci even after disabling the blacklist, I believe early binding for vfio-pci is also configured. At the time of installing Proxmox, vfio-pci is not used under any circumstances. Please review the settings you configured...
  • J
    Johannes S replied to the thread /run/pve ??.
    If you don't use most of the nodes it's far more reasonable to not use a cluster at all but setup the datacenter manager in a vm to migrate between the nodes. Your current setup will always cause issues, there is a reason why the documentation...
  • M
    Mario Rossi replied to the thread After upgrading from 9.0 and 9.1 VM Truenas won't start.
    Old Truenas VM: agent: 1 balloon: 0 bios: ovmf boot: order=scsi0 cores: 4 cpu: host hostpci0: 0000:03:00 hotplug: disk,network,usb memory: 16384 meta: creation-qemu=8.1.5,ctime=1712744821 name: TrueNAS net0: virtio=BC:24:11:BF:47:EB,bridge=vmbr0...
  • J
    Johannes S reacted to gfngfn256's post in the thread /run/pve ?? with Like Like.
    I imagine you are referring to this. Put bluntly, yes there is support for waking up a node via WOL in PVE, but not for waking up the cluster! aaron has already given you this advice, but having the majority of the nodes sleeping = cluster...
  • J
    Johannes S reacted to Eduardo Taboada's post in the thread /run/pve ?? with Like Like.
    From my opinion it has no sense to have a configured cluster with mostly of the nodes down.
  • J
    Johannes S reacted to aaron's post in the thread /run/pve ?? with Like Like.
    The problem is that this node is part of a cluster, but cannot connect on any of the both networks to the remaining cluster: The result is that the service/protocol for the cluster communication is not working and as a result of this, the...
  • G
    gfngfn256 replied to the thread /run/pve ??.
    I imagine you are referring to this. Put bluntly, yes there is support for waking up a node via WOL in PVE, but not for waking up the cluster! aaron has already given you this advice, but having the majority of the nodes sleeping = cluster...
  • G
    gfngfn256 reacted to aaron's post in the thread /run/pve ?? with Like Like.
    A regular Proxmox VE cluster needs the majority of the nodes to be online to be fully functional. With 2/3 nodes down, that is not the case.
  • A
    aah replied to the thread eingehende E-Mails blockieren.
    Ja dasist aber auch Aktiv wie im Bild
    • 1767791557568.png
  • C
    comsono replied to the thread UNAS Pro + NFS + LXC - How to do it "right"?.
    I think the solve they came up with was specific to PBS, not PVE, but the underlying issue seems to be Unifi Drive not supporting the right options on your NFS exports, such as no_root_squash.
  • A
    AndrwHmmr replied to the thread Another Cannot Access Web GUI.
    So to explain the " the system was behaving erratically in other ways": Quite akward, my "big" Hypervisor was never stable RAM Frequency wise, but stable enough for me not to notice it until one year of random freezes down the road. So it was...
  • K
    kosnar replied to the thread Connect and sync two PVEs drives with PBS.
    Hi xsuau, I write it in another way to clarify my understanding: You have 3-node cluster where two are identical production nodes with ZFS replaction (internal drives). You have PBS as a VM running in PVE which backups other VMs to drives in...
  • C
    crazywolf13 replied to the thread GPU Passthrough not respecting secondary GPU.
    Thanks a lot for this! I've done it exactly like in the post and remove my config entry to /etc/modprobe.d/vfio.conf However after a rebuild of initramfs and a reboot I still see this: 01:00.0 VGA compatible controller [0300]: NVIDIA...
  • A
    aah replied to the thread eingehende E-Mails blockieren.
    ich sehe das in Tracking auch acceepted/delivered
    • pmg_tracking.jpg
  • aaron
    aaron replied to the thread Proxmox Cluster lösen funktioniert nicht ganz.
    schau mal obs in /etc/pve/nodes noch Ordner von den alten Nodes gibt. die kannst du sicherheitshalber mal wo anders hin verschieben bevor du sie ganz löscht.
  • D
    DocMAX replied to the thread /run/pve ??.
    ok, /usr/lib/systemd/system/systemd-tmpfiles-setup.service is responsible. need to go down the rabbithole.
  • O
    Onslow reacted to AndreasS's post in the thread [SOLVED] CheckMK-Installation/Configuration help needed on SSL with Like Like.
    Question 2. solved now as well: added Proxmox pve-root-ca.pem to CheckMK Trusted Anchor Storage (CheckMK Global Settings -> Trusted certificate authoroties for SSL -> copy .pem cert there). Then re-schedule Check_MK Agent inventory service as...
  • T
    theblackdragon02 replied to the thread About to pull my hair out.
    Sorry, I am brand new to this. Everything I am getting is an error connecting. The first two i get 192.168.14.99 icmp_seq=1 destination host unreachable and the other two are timed out no servers could be reached
  • B
    beispiel123 posted the thread LXC config problem after core reboot in Proxmox VE: Installation and configuration.
    Hi everyone, I have an LXC with the following configuration: arch: amd64 cores: 8 features: nesting=1 hostname: Jellyfin memory: 8000 mp0: Movies:114/vm-114-disk-0.raw,mp=/mnt/movies,backup=1,size=1000G net0...
Show older items
Top Bottom
Back