Latest activity
-
DDocMAX replied to the thread /run/pve ??.thanks, on the actual root fs it's here /usr/lib/tmpfiles.d/pve-manager.conf need to figure out why it's not executing
-
Vvnovotny98 replied to the thread Firewall dropping packet.Hi
-
Bbeisser replied to the thread GMKTEC K12 | Ryzen 7 H 255 | Problem with IGPU.if you added another ssd, the pcie device numbers change. it means your gpu (and possibly other pcie-devices) might not be at their original ID, but a different one. easiest way to check would be login with any means and check lspci -nnk output...
-
RRudiOnTheAir replied to the thread Maschine Typ i440fx / v5.1 - Wie lange noch?.Ich teste das, und berichte hier. Blöd ist, das Win immer etwas braucht, bis es merkt das es neu aktiviert werden will.. ;)
-
FFteuti replied to the thread rpool auf vorhandenen Datenträger vergrössern.Moin, das Vergrößern mit cfdisk, mit einem Debian-Live und autoexpand und zpool online dann in der pve-console hat geklappt. Beim Vergrößern war ich dann wohl etwas zu knauserig, cfdisk bot mir 1,8T an und ich habe 1,75T eingegeben um 50Gb freien...
-
Ooli9511 replied to the thread Unable to login - I/O Error.I had the problem again. The root cause was again a failed backup due to networking. The following one-liner fixed the issue: date ; systemctl stop pve-cluster && rm -f /var/lib/pve-cluster/.pmxcfs.lockfile && systemctl start pve-cluster ; date...
-
OOnslow reacted to T2C's post in the thread ZFS rpool isn't imported automatically after update from PVE9.0.10 to latest PVE9.1 and kernel 6.17 with viommu=virtio with
Like.
Just in case somebody runs across this, I was able to fix it by doing this. I made the mistake of updating in nano /etc/default/grub and not the correct location /etc/kernel/cmdline I added quiet intel_iommu=on iommu=pt nano... -
GGlupikocz replied to the thread GMKTEC K12 | Ryzen 7 H 255 | Problem with IGPU.Well, it's not so rosy, but now I'm wondering why. You see, I discovered that on one random 256GB drive in one PCIe slot, everything worked fine for about two weeks, but I decided it was time to switch to a ZFS1 RAID with two 4TB WD Red drives...
-
Ccrazywolf13 replied to the thread [SOLVED] Authentik OCI container does not start.Here a small video: https://streamable.com/o50fib
-
Aaah replied to the thread eingehende E-Mails blockieren.vielen Dank für Ihre schnelle Antwort! ich habe sogar eine E-Mail Adresse geblockt, aber der kann immer noch eine E-Mail an uns schicken. Im Anhang befindet sich ein Screenshot dazu.
-
-
DDocMAX replied to the thread /run/pve ??.root@pve:~# systemctl cat pve-container@ # /usr/lib/systemd/system/pve-container@.service # based on lxc@.service, but without an install section because # starting and stopping should be initiated by PVE code, not # systemd. [Unit]...
-
JJohannes S replied to the thread 2 Note Cluster und PBS.Ich würde auch zum qdevice auf dem PBS raten. Eine Sache muss man aber bedenken: Der Backup-Server dann über SSH (ohne Passworteingabe) von den Cluster-Knoten aus erreicht werden. Es ist niemals gut, wenn auf das Backup ohne Authentifizierung von...
-
LnxBil replied to the thread VM boot issue after full clone between SAS storages (Dell ME4024) – Proxmox VE 8.4.14.Have you checked if the data is actually the same? Can you create a small VM which yields this error. Shut it down on the source side, do the clone and don't start it. Now try to compare the actual data on disk. Easiest method would be just a... -
LnxBil replied to the thread setting to trigger VM power cycle when guest OS reboots?.I didn't knew the vmx.reboot.powercycle flag but I can see the usefulness in this. I have emulated this kind of behaviour in my VMs by having them set to HA (specifically to restart if stopped), so I just poweroff the machine and it'll be started...
-
JDen PBS bremst du damit nicht aus. Das Qdevice erzeugt keine Last auf dem PBS. Das ist nur dafür da, um im Bedarfsfall ein indikator zu sein, welcher PVE-Node noch lebt, und welcher sich jetzt gefälligst neu zu starten hat (der, der das Qdevice...
-
Xxsuau posted the thread Connect and sync two PVEs drives with PBS in Proxmox Backup: Installation and configuration.Hello, We have some questions about how to proceed with our PVE cluster. To provide some context, we are running an HA redundant architecture with two PVE servers and two external disk enclosures for backup disks configured with ZFS RAID. The...
-
JJohannes S reacted to alexskysilk's post in the thread Error with adding a new node in the cluster. with Like.
Your network is, for a lack of a better word, broken. are you using bonds for your corosync interface(s)? do the individual interfaces have a path to ALL members of bonds on the OTHER nodes?
-
JJohannes S reacted to alexskysilk's post in the thread Error with adding a new node in the cluster. with Like.
yeah that was pretty much a given with your problem description :) They probably arent; you're just not aware of the problem because their active bond interfaces all connect to the same switch. 1st order of business- get your switches to talk...
-
JIch empfehle das einfach selbst mit zB. iotop-c -cPa zu testen. Es ist natürlich zu beachten, dass die Summe alleine nicht unbedingt das wichtigste ist und die Anzahl an Schreibvorgängen miteinzuberechnen ist. Write Amplification ist hier ein...
-
JMeine Erfahrung sagt mir, dass Proxmox im Vergleich zu einem Plain Debian aufgrund des pvestatd einen höheren Wearout hat, nicht aufgrund des Dateisystems. Man kann pvestatd ggf. so konfigurieren, dass er seine Daten nur im RAM ablegt. Man könnte...
