I ran
pct set 100 --mp0 /lib/modules/$(uname -r),mp=/lib/modules/$(uname -r),ro=1
To link the modules for the host to a container.
This produced the line in /etc/pve/lxc/100.conf od
mp0...
Also, ich benuze den NVR auf Windows wirklich wegen einem Altlast-Problem. Seit 5 Jahren läuft hier eben dieser NVR auf einem Windows PC der vor 3 Monaten kaputt gegangen ist.
Nachdem ich hier einen Server mit Proxmox VE betreibe auf dem noch...
Genau dafür sind ZFS Snapshots super.
Das Märchen „ZFS killt meine SSD“ wird nicht wahrer mit ständiger Wiederholung. Ein QCOW auf LVM kann genausogut mehr write amplification aufweisen als eine ZFS RAW.
Hi,
Thanks for the clarification.
So to confirm:
• New VMs already include Microsoft UEFI CA 2023
• qm enroll-efi-keys is only for older VMs
• Windows Server is supported when OS Type and EFI config are correct
• No further action required...
@IsThisThingOn : Thats what I thought, but man these disks are getting hammered, iowait sometimes at 65%!
I'm running RAIDZ1, or RAIDZ2, but both seem to get so bogged down. Maybe mirror is the way to go?
Naja, ZFS implementiert diverse Features, die klassische Konstruktionen nicht bieten. Wenn ich mich richtig erinnere, bietet der klassische Stack dies nicht ohne weiteres: transparente Kompression, technisch billige¹ Snapshots, garantierte...
No, its all SATA backplane. I'm seeing alot of these disks, Lenovo Enterprise 1.6TB MLC SATA 6Gbps Hot Swap Mainstream Endurance 3.5-inch Internal Solid State Drive (SSD) for x3250 M6, but im not seeing PLP or such yet.
@leesteken: You're...
There is no reason why you need enterprise drives, just because of ZFS.
For 99% of use cases, running a ZFS mirror is perfectly fine and has almost no write amplification.
Ähm, ich habe gar keine zusätzliche Grafikkarte verbaut...Ich bin gerade noch am Logs auswerten, aber wenn ich das richtig verstehe hat eine Automation mit 2 Präsenzmelder zuviele Meldungen oder so verunsacht womit das System sich selber...
Wird dann wohl an der Grafikkarte gelegen haben, da gibt es immer mal wieder spannende Verhaltensweisen. @ThoSo hatte da ja auch schon einen guten Riecher.
Bitte sei so lieb und setz den Beitrag auf [SOLVED] über Edit, danke :)
> I know about zram and I have used it in the past before. My concern here is that it will cost more CPU to compress/decompress. But I might consider it regardless since the CPU usage is relatively constantly low.
zram uses LZO-RLE by default...
Addendum:
I delved deep into my memory and documentation:
For "historical reasons," we need (among other things) a "file-based storage" for VM images and, for example, also for install images. So, we first created a dataset for this, let's call...
PROTIP - if you install PVE with Advanced options and leave a couple of GB free at the end of the disk, you can partition it post-install and add swap.
@the other hat es bereits schön aufgeschrieben. Ich sehe es nicht als zielführend dir jetzt ein paar Kommandos vor die Füße zu werfen, mit welchem Du zwei Schritte weiter kommst. Wichtig ist an dieser Stelle, dass Du verstehst was Du eigentlich...
Thanks for the reply, here are the answers:
The pool is 14TB:
zpool list -v
NAME SIZE ALLOC FREE CKPOINT EXPANDSZ FRAG CAP DEDUP HEALTH ALTROOT
storage14 12.7T 11.2T 1.55T - - 7% 87%...
If this is a Prod server and you have a license / support subscription, I recommend you open a ticket. Sounds like the hardware might not be supported with the default proxmox kernel.
Hi
I have a homelab with 8 Lenovo Tiny-PCs and a rack server built from old gaming-pc parts that is also my virtualized backup server (PBS).
I currently have my cluster nodes with an IP in the range of 10.50.20.0/24 and all my LXC/VM in a range...