Latest activity
-
KKingneutron replied to the thread General protection fault ....> CPU is 12 x 13th Gen Intel(R) Core(TM) i7-1355U (1 Socket) with 96GB DDR5 (non-ECC) https://search.brave.com/search?q=13th+gen+intel+processor+issues&summary=1&conversation=0d12838f961122bde9266a You guys are going down the rabbit hole here...
-
Mmgformula1 replied to the thread New Import Wizard Available for Migrating VMware ESXi Based Virtual Machines.Does this work with vSAN storage? I tried a few times, checked storage polices for encryption, etc but fails if i create a new VM on the hosts local storage it works.
-
KOkay, great! That already rules out a lot of errors. You still might want to run a zpool scrub just in case, if you haven't already. Oooooh boy. That's quite something right there. This may be the cause, but you'll have to do some digging...
-
KKingneutron reacted to BobhWasatch's post in the thread How does Proxmox premium remote SSH support work? with
Like.
What would be the difference security-wise? You will either have to open a port or go through a third-party server that your customers may or may not trust. Either way support people will need root access. -
KI don't see a good reason to buy new for personal use. I wouldn't buy "rebranded" ones like the linked though. They have different firmware and SMART values. You can filter by new on eBay but I wouldn't necessarily trust them to be. As for where...
-
KThis thread at https://forums.servethehome.com/index.php?threads/enterprise-ssd-small-deals.48343 has a list of enterprise SSDs for sale. Another option is getting a server that supports U.2/U.3 flash drives. They can be surprisingly cheaper...
-
CCR.01 replied to the thread [SOLVED] Proxmox-Installation schlägt immer wieder fehl.Es ist völlig verrückt, ich habe nun einmal die Option Therminal UI getestet und da lief es ohne Probleme durch, echt verrückt.Ich dachte ich habe ja eh nix zu verlieren, nun teste ich es einfach einmal.... Wie ich gelesen habe ist es wenn es...
-
AI use this (iotop-c, actually, which has a convenient keyboard shortcut for it) all the time and it's in all my guests' kernel args. I wrote about it too.
-
AAlecz replied to the thread [SOLVED] Cannot login to Proxmox GUI under moderate load.So while, I agree this is a low power system, I find it a poor excuse to not work properly under "moderate load" (not allow me to login and interact with the OS installed on a separate HDD). To further prove my point, the system has been...
-
NNhoague replied to the thread The SSD search continues ....Then I've read all the posts about disabling services, running log2ram, etc, and while those might be viable "fixes," they aren't a solution. I'd rather go after the solution and not start tinkering with alternatives ya know?
-
Falk R. replied to the thread Performance Probleme.Klar bremst der RAID Controller. Ich würde nie NVMe hinter einen RAID Controller packen. Die RAID Controller haben in der Regel 8 PCI Lanes und jede NVMe auch schon 4, somit ist der RAID Controller immer ein Bottleneck bei mehr als 2 NVMe. Dann... -
NNhoague replied to the thread The SSD search continues ....And the plot thickens. I'm not familiar with U.2. I'm running a supermicro chasis with Intel(R) Xeon(R) CPU E5-2697 v4 @ 2.30GHz, 512GB RAM, 4 x CT2000BX500 on raidz1, 12TB HDD for backup. I was hoping to build server, install proxmox, run...
-
Aavacado replied to the thread Can a VNET be used to isolate and test DR solution?.You should be able to do what you want with a simple zone.
-
DdoingOK replied to the thread VMs randomly freezing/crashing post upgrade from 8.3 to 9.1.4.the node is running ::: roxmox-ve: 9.1.0 (running kernel: 6.17.4-2-pve) pve-manager: 9.1.4 (running version: 9.1.4/5ac30304265fbd8e) proxmox-kernel-helper: 9.0.4 pve-kernel-6.2: 8.0.5 proxmox-kernel-6.17.4-2-pve-signed: 6.17.4-2...
-
AAlecz replied to the thread [SOLVED] Cannot Remove Disk Image.This happens if you move a disk to a different storage via the GUI and do not select "delete source". I would argue this is a bug in the GUI, but maybe there is some obscure reason it doesn't let you "cleanup" after.
-
UdoB reacted to fstrankowski's post in the thread Hard freeze on Intel N150 (Twin Lake) when iGPU/renderD128 is active with Like.
Double post. Please refrain from supporting here but instead in the original Thread from OP here: https://forum.proxmox.com/threads/hard-freeze-on-intel-n150-twin-lake-when-igpu-renderd128-is-active.178531/ -
DdoingOK replied to the thread VMs randomly freezing/crashing post upgrade from 8.3 to 9.1.4.Example of one of the VMs that keeps freezing.. agent: 1 boot: order=net0;scsi0 cores: 30 hotplug: network,usb ide2: none,media=cdrom memory: 114688 meta: creation-qemu=8.0.2,ctime=1696378445 name: local-build001 net0...
-
Sseanr22a replied to the thread Opt-in Linux 6.17 Kernel for Proxmox VE 9 available on test & no-subscription.I have the old Intel(R) Xeon E5-2696 v4 in my servers and all of them get the black screen at boot BUT, wait 5-7 minutes and they boot. Maybe it is the same for you that you have to wait a long time before the system boot? I have no idea what it...
-
DdoingOK posted the thread VMs randomly freezing/crashing post upgrade from 8.3 to 9.1.4 in Proxmox VE: Installation and configuration.Hi All. Normally i just read these and they mainly cover my needs. Having some trouble finding info about my issue. So figured i would try. I have a 10 node cluster with about 50 VMs running. All running Ubunutu 20.04 LTS. Recently upgraded...