Latest activity
-
Aaoxomoxoa replied to the thread broken text in browser window.the browser is Chrome version 143.0.7499.170
-
ZHello, I have proxmox running, that should now be using VLAN but maybe I have mistake in my approach. vmbr1 should get IP from VLAN 12, but also access 11 to reach IP cam... In both cases I cannot ping from VLAN 12 devicee to VLAN 11... Ist...
-
-
Llockmartkyushu replied to the thread Auto install through iPXE (for Proxmox v8 and v9).I gave up and decided to post my iVentory workaround (thanks elmar)... this is the ONLY way i was able to do this, because even though the /init inside the initrd points to proxmox.iso it still would not boot into the installer. Steps to PXE...
-
Rrseifried replied to the thread watchdog detected hard lockup on cpu XX.My solution (HPE ProLiant DL360 Gen10) was to set the power profile in the BIOS to "High Performance Mode". Apparently, there are CPU stalls when a core needs to be woken up from a deep sleep state. No problem anymore since 4 weeks.
-
KK.O. replied to the thread CEPH Erasure Coded Configuration: Review/Confirmation.Hi there! First off, thanks so much for sharing your experience with custom CRUSH rules and MSR in Ceph—this is super valuable for someone like me who’s still new to Ceph (total beginner here ). I set up a 4-node test cluster (Squid 19.2.2)...
-
Ssaskog replied to the thread Update Installed -- System booted in EFI-mode but 'grub-efi-amd64' meta-package not installed!.Hello, I was getting the error about missing grub-efi-amd64 and did an apt install grub-efi-amd64 as suggested on this forum. This resulted in grub-pc being removed which is expected as I have a system that booted in efi not bios. Now I get new...
-
UdoB reacted to Impact's post in the thread Backup fails when (additional) container disk is on ZFS ZVOL with
Like.
I didn't say to use grep. I cannot see subvol-164001-disk-1 here. See how this makes zero sense to name it ZVOL? ZFS_POOL_A/zvol 444G 389G 0B 96K 0B 389G filesystem This together with... -
Eelmarconi replied to the thread Auto install through iPXE (for Proxmox v8 and v9).Check out https://www.iventoy.com/en/index.html
-
AI have a new pve install. I would like to tether it to my Samsung S20+ phone for Internet access. I connect the phone to a USB port on a Dell Optiplex 790 (I know, ancient, but it works very nicely). lsusb shows this: Bus 001 Device 004: ID...
-
fstrankowski replied to the thread broken text in browser window.Please provide a screenshot. Thanks. -
Jjanus57 replied to the thread broken text in browser window.Hi, What browser do you use and it's version ? Best regards,
-
BBingo600 replied to the thread Is proxmox affected by ths one ?? - Systemd vsock sshd - Vulnerability.Just noticed this file: /etc/ssh/ssh_config.d/20-systemd-ssh-proxy.conf # SPDX-License-Identifier: LGPL-2.1-or-later # # Allow connecting to the local host directly via ".host" Host .host machine/.host ProxyCommand...
-
Jjanus57 replied to the thread Problem with public IP into VM [SOLVED].Hi, You should give more details and if you see the MAC of the VM on your switch. Best regards,
-
Pproxuser77 reacted to Corecounter's post in the thread Wo finde ich Changelogs von Proxmox PVE? with Like.
Danke euch beiden. Die Lösungen sehen effizienter aus. Ich werde das mal ausprobieren. :)
-
Jjanus57 replied to the thread Secure Boot – Microsoft UEFI CA 2023 Certificate Not Included in EFI Disk.Hi, Can you give the configuration of your VM ? In theory, yes (if I understand correctly). Best regards,
-
fireon replied to the thread automount in lxc container.Grundsätzlich funktioniert das hier mit dem Pamautomounter sehr gut auch in LXCs. Ich nutze hier Ubuntu 24.04 LTS. Als Backend verwende ich UCS (Uninvention). Den Automounter verwende ich mit NFS und SMB Freigaben. Funktioniert absolut stabil und... -
Iimapi replied to the thread Restore single Virtual Disk from PBS.How hard it is to implement this feature? I guess quite common is that you have multiple disks on vm and you want to restore just one (OS / DATA), currently restoring OS disk (50G) of a 5T nextcloud server. Would be really nice to have a feature...
-
UdoB replied to the thread Upgrade ging schief! zfs error: failed to iinitalize .....Bei mir klappt das per pinning: ~# proxmox-boot-tool USAGE: /usr/sbin/proxmox-boot-tool <commands> [ARGS] /usr/sbin/proxmox-boot-tool kernel pin <kernel-version> [--next-boot] /usr/sbin/proxmox-boot-tool kernel unpin [--next-boot]...
-
fireon replied to the thread Web GUI login using SSSD.I would probably do the same in this particular case. I assume you're doing this so that users can also use the CLI directly with sudo?
-
Thank you. I know about that. Normally, if I want to login to PVE using user entries on the LDAP server, then I should do that. I want to log in via PAM using SSSD just for fun. If I add the user to the realm "PAM", the login with SSSD-PAM is...
