Latest activity
-
Rrahlquist replied to the thread Opt-in Linux 6.17 Kernel for Proxmox VE 9 available on test & no-subscription.So picked up a minisforum MS-01 this month to setup a virtualized opnsense instance to replace my old router (a HP t740 TC). It had been working well until today. I needed to reboot the MS-01 and it didnt boot, hooked up a screen to see...
-
JJohannes S replied to the thread No-License ACME support?.There is no functional difference between a PMG with a support subscription and one without. The actual license is open source anyhow. The difference is that only subscripers get access to the enterprise repo (which will only get updates tested...
-
J@KlausV Ich habe auf eine extra Maschine einen PBS aufgesetzt, auf den ich von allen LXC des PVE v8 ein Backup gezogen habe. Dann den PVE mit v9 neu aufgesetzt und eingerichtet, danach die Backups der LXC darauf restored. Das hat prima geklappt...
-
Rredactedhosting replied to the thread Move backups from disk to disk.How I solved this issue: I had two mnt storages, Storage 1 and storage 2. Storage 2 was a external usb 6tb drive that had most of my backups. I wanted to turn this into a zfs/NFS drive for me cluster but it held about a years worth of backups on...
-
Eedocod posted the thread Wrong version in proxmox-default-headers (2.0.1 instead of 6.17.xx) in Proxmox Backup: Installation and configuration.Hi everyone! I am trying to install bcachefs dkms module. It is provided as a normal dkms module, so i expected it to work fine. It worked fine on my test debian machine, however when trying to install it on my PBS, i get the following error...
-
Hharasawa-id replied to the thread Web GUI login using SSSD.Thank you. I know about that. Normally, if I want to login to PVE using user entries on the LDAP server, then I should do that. I want to log in via PAM using SSSD just for fun. If I add the user to the realm "PAM", the login with SSSD-PAM is...
-
Sstuartthebruce replied to the thread [SOLVED] Live migration occasionally fails with QEMU assertion failure.I have isolated this QEMU assertion failure to live migration of Linux VMs that dynamically provision filesystems on a local HV zpool with LVM during migration. Is this a known limitation of QEMU? Note, if I move the LVM to shared ceph storage...
-
Oomavoss replied to the thread Benötige Hilfe für Upgrade V8 auf V9.@KlausV Ich habe auf eine extra Maschine einen PBS aufgesetzt, auf den ich von allen LXC des PVE v8 ein Backup gezogen habe. Dann den PVE mit v9 neu aufgesetzt und eingerichtet, danach die Backups der LXC darauf restored. Das hat prima geklappt...
-
Mmaze-m posted the thread Migration der Mount Points von LXC-NFS-Container in VM in Proxmox VE (Deutsch/German).Hallo zusammen! Ich würde gerne meinen LXC-Container in eine VM migrieren und die darin befindlichen Mount Points einfach umhängen. Ist das möglich?
-
-
Bbig_blue replied to the thread hdd performance.How to get the information you need. This is the nvme I am using: KINGSTON SFYRD2000G and this is the output of spool status:
-
news replied to the thread hdd performance.This says nothing, like I drive car and it use gas. -
Bbig_blue replied to the thread hdd performance.I am using the 2x Kingston 2TB nvme, with a mirror zfs. No additional optimization. I used the installer for the ZFS setup.
-
news replied to the thread hdd performance.And you use which nvme now? And witch ZFS setup and optimation did you use?
-
SSTRUBartacus replied to the thread PBS: proxmox-backup-proxy fails to start due to permission issues on /run/proxmox-backup.Yes, it’s running inside a Debian LXC container (see the configuration below). I’m aware that the issue is related to missing permissions, which is why I’m using the workaround of creating /run/proxmox-backup before starting PBS. arch: amd64...
-
BHi. I am using Proxmox since about 2 years and it is working without problems. Now I want to optimize the performance because of some issues and have found some very strange behavior. So I bought very similar hardware to compare and tune the...
-
MIs the no-license version of PMG meant to work with ACME from the GUI ? When I try to generate new certificates, I get either 500/404 errors. (500 error went away after fixing a Caddy Server route, now its just 404). It does not appear to be...
-
Sstuasch reacted to CRCinAU's post in the thread [SOLVED] BSOD: System thread exception not handled with
Like.
So, I just had to go through this - but AFTER the image had been taken - so I could only boot into recovery mode... 1) You can remove the Xen drivers via Recovery mode using something like: X:\> dism /Image:D:\ /Get-Drivers Then look for the... -
G_gabriel replied to the thread Slow networking between VM's.? + missing IP
-
MMelone145 replied to the thread Firewall auf Proxmox mit nur einer IP-Addresse.so wie ich das aber verstanden habe ist das hier für die Weiterleitung zustädnig wenn es nicht denn port 22 oder 8006 hat post-up echo 1 > /proc/sys/net/ipv4/ip_forward post-up iptables -t nat -A PREROUTING -i vmbr0 -p tcp -m multiport ...
-
CCorecounter replied to the thread Wo finde ich Changelogs von Proxmox PVE?.Versteh mich nicht falsch, aber ich hab nicht die Zeit mir jedes Paket rauszusuchen, was im Update ist und mir dann die Changelogs einzeln anzusehen. ;) Wenn Proxmox es für seine Major-Updates schafft ein ordentliches Changelog zu verfassen und...
