Latest activity
-
Aalexskysilk replied to the thread Ceph performance seems too slow.you DO understand that your "speed" can't be faster than the transport. and if you are using the same interface for both public and private traffic that essentially caps your performance at 5gbit/s. this is your drives' observed latency, and has...
-
CCorecounter replied to the thread GEEKOM Mini IT8 mit 512GB NVME SSD für Proxmox 9 ohne zusätzliche 2.5 Zoll SSD.Genereller Tip aus meiner Erfahrung: Man sollte die Finger von diesen Billig-China-Boxen lassen. Da wird meist grenzwertige Hardware (auf dem Mainboard) verbaut und der BIOS-/Treiber-Support ist auch extrem dürftig bzw. kurzlebig. Hol dir lieber...
-
CCorecounter posted the thread Wo finde ich Changelogs von Proxmox PVE? in Proxmox VE (Deutsch/German).Nach PVE 9.1 sind ja schon wieder ein paar kleinere Updates erschienen. Aktuell bin ich bei PVE 9.1.4. Aber wo finde ich die Changelogs dazu? Proxmox selbst stellt in seinen Releasenotes wohl nur die Changelogs zu den Major Versionen online.
-
KYou can configure the WebUI using LDAP directly: https://pve.proxmox.com/pve-docs/pve-admin-guide.html#pveum_authentication_realms
-
Ggfngfn256 replied to the thread Opt-in Linux 6.17 Kernel for Proxmox VE 9 available on test & no-subscription.As far as I can tell, the HP EliteDesk 800 G1 was released in Q1 2014. Maybe you are referring to other embedded HW within?
-
MMike1988 posted the thread Suche Tipps/Hilfestellung bzgl. meines Homelabs in Proxmox VE (Deutsch/German).Hallo zusammen, aktuell werkelt bei mir eine Synology als FamilyNAS. Backups erstelle ich manuell mit Hilfe von 2 USB HDDs im Wechsel. Mir ist bewusst, das Ganze ist keine saubere Lösung - daher bin ich hier und möchte gerne 2026 auf was...
-
SSteveITS replied to the thread Ceph performance seems too slow.Also are they enterprise drives?
-
Ddroidus posted the thread MP on LXC is not coming through in Proxmox VE: Installation and configuration.I mounted a nfs share on my PVE server. The share mounts fine. I mount it to my LXC container, and the folder is created, but the folder is empty.
-
Ssjensen7 reacted to automatic's post in the thread Mellanox ConnectX-3 VFIO passthrough issues with
Like.
Hello, everyone. This thread is a crosspost from a different forum, seeing as how my thread there seems to have died. I’ve spent many, many days trying to solve this issue to no avail, which is why I’ve resorted to making this post. There’s a... -
Ssjensen7 replied to the thread Mellanox ConnectX-3 VFIO passthrough issues.I'm following this. Having the same issues with passing through ConnectX-3 cards. Seems like nothing I do works. I'm also trying to do full passthrough.
-
UdoB replied to the thread Ceph performance seems too slow.You did not give us enough numbers to decide ;-) What is the topology? Default "size=3/min=2"? What is the actual performance? for the OSDs you could run for OSD in {0..8} ; do ceph tell osd.$OSD bench; done for a pool "ceph0" you could... -
Kkentravis posted the thread Ceph performance seems too slow in Proxmox VE: Installation and configuration.I am thinking our Ceph performance isn't what it should be with a three node cluster each with three NVMe drives (9 OSDs). Ceph runs on a independent 10 Gbps network. I am seeing Apply/Commit latency of about 3/3 with about a dozen VMs/containers...
-
Ddev.4openid replied to the thread Try to install Proxmox 9.1 on a old linux server, and get lots of disk IO error..I have just read the above article and am experiencing problems as described in post. TBC, I have downloaded the v9.1 from the site and have been attempting to get it to work, but to no avail. As such, I do not know which kernel is in v9.1 - I...
-
Ddas1996 replied to the thread Try to install Proxmox 9.1 on a old linux server, and get lots of disk IO error..Even with kernel 6.14?
-
Llouie1961 replied to the thread Slow networking between VM's.Are you traversing VLANs or doing something else that is forcing your traffic through the router? Within the same VLAN and on the same VMBR in Proxmox, the network interface doesn't matter. The traffic will go as fast as your motherboard can...
-
Ddev.4openid replied to the thread Try to install Proxmox 9.1 on a old linux server, and get lots of disk IO error..Interesting reading this. I also am using an old m/b, however it is a z77 chipset and I have the similar issues. I previously ran v8.4 on it and it worked fine. Now with v9.1 I get "kernel panic - not syncing: VFS: Unable to mount root fs on...
-
XXelota posted the thread [SOLVED] Fresh Install can't acces GUI on local network in Proxmox VE: Installation and configuration.Hello, First i wish all of you à beautiful end of the years celebration. i'am sorry to ask this question but after reading all post related i can't find my problem. So i install a fresh proxmox 9.1 and can't acces GUI. i tried with two...
-
-
FFlickoDrimbompf replied to the thread LXC Snapshot no available yet ? Will it work on LVM ?.I tried this & this is what happened: Shut down the CT. Commented out all the mp[x] lines. Took the snapshot. It worked. But when I uncommented the mp mount point lines, the snapshot immediately disappeared. Does this workaround no longer work...
-
GThat statement is incorrect. This applies only if both VM reside in the same L2 Domain which is why i asked explicitly for this scenario.
-
EErtu replied to the thread H740p mini and SAS Intel SSD PX05SMB040.Ok iswapped back to 740P mini then i think i kill the server DS1 and DS3 fix DS5 and DS6 blinking. No start, no bios, no screen, nothing :/
-
