For the record
I faced the same issue, to boot from NVMe pass through for VM.
After reading the following post, I tested "adding Virtio RNG device" to the VM, and everything works again.
Please check it.
Please refer to this post as well...
Thanks for the detailed and honest response. The part about having to be more hands on with this over Nutanix, kind of halts it in its track. I was hoping it was going to be more of a, once set up just let it be to run itself (of course, aside...
It's not related to UEFI PXE, but still same reason and solution.
Add some note here for others to refer.
If you tried to use UEFI mode boot from NVMe pass through, you will need to add a Virtio RNG device for the VM to boot from NVMe (PCIe pass...
Willste mich hier auf den Arm nehmen? Die IPs sind doch schon wieder falsch (oder noch immer) :D Wie du aus deiner pfSense überhaupt irgendetwas pingen kannst ist schon erstaunlich, bei der Config auf dem Proxmox Host. Die Proxmox Network-Config...
Hello Proxmoxer,
I created a tool to automatically set the CPU affinity (at runtime) for VMs.
https://github.com/egandro/proxmox-cpu-affinity
This picks the best combination of cores. As mentioned by this project...
ähnliches Setup, große VM mit allen Daten (bei mir Fedora) mit stündlichem Backup auf eine PBS VM und von dort nächtlich auf einen bare metal PBS (der läuft nur für die Zeit der Syncs und wird dann wieder schlafen gelegt). Zusätzlich lasse ich...
Wieso 10.0.0.2 ? Das macht doch garkeinen Sinn? Du nutzt doch oben für deine vmbr1 das Subnetz 10.0.10.0/30? Warum also jetzt eine IP aus einem komplett anderen Subnetz?
Gleiches gilt für das Gateway. Wo hast du jemals ein 10.0.0.1 Gateway...
Aus den Gründen, gehören files nicht auf blockstorage, sondern auf datasets ;)
Denke mal, @JuSt4Prox hat legacy Gründe für das aktuelle Setup.
Für NVR eignet sich IMHO auch kein Windows.
ich habe das jetzt geändert wie im video
IP: 10.0.0.2
GW: 10.0.0.1
DNS 8.8.8.8
und jetzt sind meine VMs die ich da hinter installiert habe offline also wenn ich jetzt versuche zbw ping google.de laufe ich in einem timeout
Wenn Du deine IPs der pfSense änderst, solltest Du auch dein restliches Setup, welches Du im Vorfeld eingerichtet hast, an diese Änderungen anpassen.
Dazu nettgemeinter Rat: Solltest Du nicht an einer Schreibstörung leiden (z.B. Legasthenie)...
Well :) this line - is the online line in Proxmox to set task affinity.
https://github.com/proxmox/qemu-server/blob/e781d9713fb3d45a523fe14db6cd99ac60bbfbb5/src/PVE/QemuServer.pm#L3202
Even with Numa (where you have multiple CPUs that have...
Ok done but seems that the first drive isn't enabling cache can you confirm ?
root@px5:~# sdparm -s WCE=1 -S /dev/sg0
/dev/sg0: NETAPP X575_TPM4V400AMD NA04
root@px5:~# sdparm -s WCE=1 -S /dev/sg1
/dev/sg1: TOSHIBA PX05SMB040...
Ich habe ander IP Addressen als im Video da ich mir mitlerweile andere angeschut habe das ganze ist schon richtig denn meine VM können nach ausen kommunizieren aber wenn eine einfrage von draußen kommt landet diese nicht bei der Firewall zbw habe...
Warum nur 1x pro Woche?
Aber du hast die komplette Flexibilität einer VM.
Warum extra Controller? Du kannst doch einfach einzelne Disks durchreichen, das mache ich seit Jahren so. Du hast nur keine Smart Werte in der VM, weil die der Host...
Das ist ja aktuell mein Problem. Mein Backup läuft nicht mehr, da irgendetwas mit der OS SSD ist. Aber ein Backup der VM auf mein NAS ist fester Bestandteil meines Netzwerkes.
Danke euch.
thanks for the reply.
dh -f gives me this (among other things)
/dev/sdb1 469G 79G 366G 18% /mnt/media
which says to me that the starting folder is mounted correctly.
ls -al for the subfolders gives me this...