Latest activity
-
UUtilisateurCXS posted the thread Who has already used EVPN in Data Centre Manager and really tested it? in Datacenter Manager: Installation and configuration.Who has already used EVPN in Data Centre Manager and really tested it? And if anyone has a tutorial on how to use this properly.
-
EeMTB replied to the thread Proxmox Virtual Environment Upgrade von Version 8 auf 9, Debian 13.Ich bin mir nicht sicher, ob ich dich richtig verstanden habe. Ich habe unter Proxmox v8 mehrere VMs angelegt, an die ich PCI Decvices durchreiche. Hier musste ich efidisks verwenden. Nach dem Upgrade auf v9 (und dem damit verbundenen Upgrade auf...
-
Ssanta_on_a_sledge replied to the thread Proxmox cloning corrupts the target image - extensive analysis included.For anyone struggling with this right now, I advise to create a wrapper script in place of /usr/bin/qemu-img to insert the "-S 0" flag for the convert subcommand. This disables the intelligent sparse detection completely but at least the cloning...
-
Ssanta_on_a_sledge replied to the thread Proxmox cloning corrupts the target image - extensive analysis included.Thanks, but I'm going to pass on filing the formal ticket myself. I'm a bit short on time to go through the Bugzilla submission process right now. I think there is enough detail in this thread for one of your devs to create the tracking ticket...
-
Mmarkf1301 replied to the thread need suggestions for replacing current PBR with new one.I'm good to go for now. I'm getting an error accessing the 'enterprise' server for updates, but think this is tied to my current license being assigned to my old box. I'll get that resolved today. thanks,
-
Mmateusz1234 replied to the thread Restore from backup failure (conversion from privileged to unprivileged container).Could this become some advanced option in GUI when restoring CTs? It is annoying having to find out what is the right command full command to run and default debian lxc images have postfix installed with creates 'random' file nodes in /var/spool...
-
Kkengrass replied to the thread Persistent VNC Port Conflict Issue During VM Migration in Proxmox Cluster.this is VNC port problem in cluster with many nodes when migrate, do you understand ?
-
pneubert replied to the thread [SOLVED] Super slow, timeout, and VM stuck while backing up, after updated to PVE 9.1.1 and PBS 4.0.20.We experienced the same issue where the system froze immediately. We were able to resolve the problem by disabling rx-gro-hw on the affected network interfaces. After setting this option to off, the system became stable. In our setup, the... -
Bberypapa replied to the thread [TUTORIAL] Ubuntu LXC CT setup with device passthrough on Proxmox VE 8.4 for Frigate installation.Hello, I have similar issue and to solve that I use this script to modify the the container settings at pve boot (before the containers start): #!/bin/bash # Path to the LXC config file CONFIG_FILE="/etc/pve/lxc/200.conf"...
-
GGayan Kodithuwakku replied to the thread [SOLVED] Super slow, timeout, and VM stuck while backing up, after updated to PVE 9.1.1 and PBS 4.0.20.Hi Chris, I am experiencing the same issue. We are using LACP for our host configuration. When we attempt to migrate a VM to another datastore, the VM hangs. We have a support subscription, so is there any way to make changes without rebooting...
-
Ffl0moto replied to the thread Update Probleme?.Hi *Host* -> Updates -> Repositories Enterprise/Ceph Repositories deaktivieren, sofern keine Subscription vorhanden. Update erneut durchführen
-
WWenn ich über das WebUi - Updates-aktualisieren gehe kommt folgende Meldung: Über die Konsole folgendes: Muss ich da was ändern/einstellen? Ggf hängen meine Verbindungsprobleme eines LXC-Containers ja auch damit zusammen?
-
Gguruevi replied to the thread Multi-site federation - Would this be interesting for Proxmox ?.You should look into Proxmox Datacenter Manager for your unified view of multiple clusters. You can tie multiple sites together and at least manually start moving things between clusters. With a bit of setup, you can actually do what you want...
-
BBP158 replied to the thread HyperV-VM mit Windows 10 nach Proxmox transferieren/umziehen.Danke für den Tip mit EFI-Boot ... Nach dem Umstellen auf UEFI und einhängen der EFI-Partition lief es ohne Probleme ! Vielen Dank!!!!! :)
-
IIsThisThingOn replied to the thread Proper way to install Proxmox in UEFI mode..I don't quiet get how you think these things are exclusive to each other? That should not be the case at all. You should always be able enter BIOS and you should always be able to get video when your system loads grub, and when your system...
-
NNerion replied to the thread Performance Probleme.Ja ich bin mir sicher. Wir überwachen den Link mit Cacti. Phasenweise sind es mal 2,0 Gbit/s Zum Einsatz kommt ein Dell Raid Controller mit Batterie. PowerEdge 16. Generation Datacenter NVMe von Dell Mir ist bewusst, dass wir hier etwas...
-
DDeleted member 326695 posted the thread Multi-site federation - Would this be interesting for Proxmox ? in Proxmox VE: Installation and configuration.-
-
JYes, a lot of setups will reach end of life before a cheap (non-PLP) SSD may die. At least you may hope for that. To increase the reliabilty drastically my rule is to use redundancy and to use "with-PLP" devices. Disclaimer: I do not follow my...
-
JJohannes S reacted to Falk R.'s post in the thread Proxmox Virtual Environment Upgrade von Version 8 auf 9, Debian 13 with
Like.
Ja für PCI Passthru brauchst du EFI, aber so viel Aufwand musst du nicht betreiben. Wenn das eine zu Proxmox migrierte VM ist, kannst du auch auf die EFI Disk verzichten und die VM bootet. Sonst kannst du jederzeit auch eine neue EFI Disk... -
NNickske00 replied to the thread Support for Spamhaus DQS.Hi, Any news about this? I have been playing around with pmg the last days and could not get the default RBL checks working correctly (even after setting up a local unbound resolver). I just installed this plugin, and on the first try it...