Don't know what are you referring to. Do you have a link to the change you mention? Also, resurrecting a year+ old post without providing details isn't that useful. In the mean time there has been improvements for both restores and verification...
Hello,
pmgversion:
pmg-api/9.0.3/359c41ebd3ab (running kernel: 6.17.2-2-pve)
no special templates for configuration or something.
In Configuration - Mail Proxy - Transports, all domains have "Use MX" disabled.
I don't know, when this exactly...
Bist du dir sicher dass du nur 1,5 GBit erreichst. Beim Backup wird immer MB/s oder GB/s angegeben.
Warum erreichst du denn dann nur 3,5 GBit beim kopieren? Da stimmt ja generell etwas nicht. Eventuell mal das Sizing posten.
Wenn du mit Raid...
There was something change in the git with "input buffer size"
The question is was this generally changed in future pbs versions or is this something we must change manually to see if this solves our problem.
Some suggestions:
You can use bmon on your PVE host to determine which interface is handling the traffic.
When you run iperf3, use port numbers other than the default.
Disconnect one of the links and test again. Do you get the speeds you are...
Ich habe 3 Lenovo M720q mit Mellanox Connect-4LX Karten im Einsatz beim letzten Update, hat sich der Kernel leider verabschiedet.
Um das Update einzuspielen, bin ich folgende Schritte durchgegangen:
1) mft_uninstall.sh
2) apt-get update
3)...
The sync job also failed with the new kernel. Unfortunately, I still cannot see any logs from the sync task on the local PBS. On the remote PBS, I get the following output:
2025-12-23T12:03:48+01:00: starting new backup on datastore...
This suggests a driver or vBIOS conflict: the card initializes incorrectly. HDMI works only on iGPU. Reflash correct vBIOS, reinstall clean drivers, and verify motherboard BIOS display settings and compatibility.
Ist das eine HyperV V2 VM gewesen? Wenn ja, dann musst du EFI nutzen.
Das vorher installieren der Treiber funktioniert nur, wenn du den oben aufgeführten Artikel liest. Windows hat da so seine Eigenheiten.
Did some testing with telnet: the problem here is Exchange. I'll update the thread with a suitable solution for future reference in case someone experiences the same problem.
Why wasn't this already posted in 2024? As far as I can see, this is a user configuration error, not a problem in PVE. Best to use something based on the VMID, this is unique in a cluster.
I have now activated the pbs-test repository on both systems and updated the kernel to 6.17.4-2-pve. I have now restarted the sync job. It is currently running, but I still cannot see any logs in the Task Viewer.