Latest activity
-
GGlupikocz replied to the thread GMKTEC K12 | Ryzen 7 H 255 | Problem with IGPU.Unfortunately, I don't know, because I've always used Parsec, but as far as I know, you can upload Virtual Display without Parsec. It's available anyway; it used to work for me on GMKTEC M5PRO before I started using Parsec or Moonlight...
-
weehooey-bh reacted to Petr Svacina's post in the thread [SOLVED] How to "isolate" PBS from PVE - security best practices ... with
Like.
Ach good idea, thanks for the ultra quick reply ! :) Mery Christmas ! -
weehooey-bh reacted to fabian's post in the thread [SOLVED] How to "isolate" PBS from PVE - security best practices ... with Like.
you can give the PVE access token only access to read old backups and create new ones, but not remove/prune backups. you can combine this with a sync job on the PBS side to keep an offsite archive that is decoupled from the main PBS system (with...
-
GGlupikocz replied to the thread GMKTEC K12 | Ryzen 7 H 255 | Problem with IGPU.I did this: I installed the latest Proxmox and did all the updates, and then I immediately started entering commands from: https://pve.proxmox.com/wiki/PCI_Passthrough That is dmesg | grep -e DMAR -e IOMMU dmesg | grep 'remapping' echo "options...
-
weehooey-bh replied to the thread Persistent VNC Port Conflict Issue During VM Migration in Proxmox Cluster.@bytegenius You can file a feature request here: https://bugzilla.proxmox.com/ Once you do that, please post the link back here so people can follow it. @lost_avocado where did you see this? Can you post a link to it? How do you get the port...
-
Bbeisser replied to the thread GMKTEC K12 | Ryzen 7 H 255 | Problem with IGPU.does work only for you if parsec is installed? because for me the display works fine until windows enables the amd graphics driver and then it all goes to garbled crap. if i disable to amd driver the display comes back but i have only 800x600...
-
GGlupikocz replied to the thread GMKTEC K12 | Ryzen 7 H 255 | Problem with IGPU.And as you can see, I have the image on my monitor and through Parsec, and I see the same thing on both :) And tell me, did you extract the Vbios using this?
-
-
GGlupikocz replied to the thread GMKTEC K12 | Ryzen 7 H 255 | Problem with IGPU.You know what, I uploaded the latest BIOS from December and extracted both the VBIOS and ROM from it, so that should help you. Additionally, try uploading Parsec, but for the entire system, not just for the user + the virtual display. My monitor...
-
-
MM_D replied to the thread Proper way to install Proxmox in UEFI mode..I think I do understand this reasonably OK. I never said I expected it to boot UEFI when in Legacy First mode :). Just when I first test-installed PVE on the server, I forgot to check the boot mode. I know PVE can boot in Legacy mode, but as I...
-
We're playing around with it since the first release candidates in QA and think that we will be able to provide a public build on the test repo in the comming weeks. When we actually provide full (enterprise) support depends a bit on QA and how...
-
there will be an announcement once packages are available for testing ;)
-
weehooey-bh reacted to LnxBil's post in the thread Spinning disks reporting as type "unknown" with Like.
An SSD reports itself as SSD, a HDD does NOT report itself as HDD, because there was nothing else than HDD for many decades. Do you experience problems with this report? It makes no practical difference in running the computer.
-
Nnilima65 replied to the thread Existing server no longer connects to network.After changing the networks of your Proxmox, you may have to adjust your Proxmox network configuration. Check the /etc/network/interfaces file for your eno1 interface and any bridge settings and restart the networking, or recreate the bridge...
-
fireon replied to the thread Add Proxmox server to checkmk.Should work. I have it running here too. Here is an additional current link for part of it. https://docs.checkmk.com/latest/en/monitoring_proxmox.html -
weehooey-bh reacted to fabian's post in the thread Proxmox cloning corrupts the target image - extensive analysis included with Like.
cloning the disk does not care about its contents at all.. is this a physical disk? or iSCSI? or ? please provide more data! could you also post "lvmconfig --typeconfig full | grep -e thin -e zero" and "pveversion -v", thanks!
-
UdoB replied to the thread Performance Probleme.Im ersten Post sind Gigabit angegeben... -
What is the problem with Austria, did I miss something?
-
NNerion replied to the thread Performance Probleme.Dein Logik hat aber einen Fehler: 525 MB/s sind 4,2 Gbit/s Ich komme aber nur auf 1,5 Gbit/s
-
weehooey-bh reacted to fabian's post in the thread What Permissions are needed on the PVE/PBS-Remotes for a Datacenter Manager User? with Like.
that would just be more complicated, but still require PDM to have all that access to PVE.. it would also make certain optimizations impossible, like collecting metrics/tasks/status/.. once and exposing it to different PDM users (with filtering).
-
Kkengrass replied to the thread Persistent VNC Port Conflict Issue During VM Migration in Proxmox Cluster.Any update ?
