Latest activity
-
BBernd_909 replied to the thread Disk constellation for DXP4800.Perhaps I should rephrase it like this: Given the hardware of the DXP4800, which disk setup would match the performance of the rest of the setup. I dont know what uses I will have for it in the future, and perhaps I end up with 20 containers in a...
-
Ppiro299 posted the thread Proxmox 7 - Manuelles Backup lässt sich nicht erstellen in Proxmox VE (Deutsch/German).Moin zusammen, ich kämpfe seit einigen Wochen damit, dass man Script keine Backups von meinen 4 LXC Servern macht. Ich habe noch Proxmox 7. Ich möchte gerne auf 9 aktualisieren. Dafür benötige ich aktuelle Backups der Server. Deshalb habe ich...
-
-
Bbeisser reacted to MHeymann's post in the thread 10Gb Netzwerk erreicht nur 1Gb Geschwindigkeit with
Like.
Vor rund nem Jahr hätte ich sch*** darauf gesagt. Aber bei den bodenlosen RAM und Speicher Preisen kann einem echt die Laune vergehen. Hab letztes Jahr 32GB Ram für unter 60€ gekauft. Das gleiche Kit kostet ZZ rund 200€. Die beiden 12TB Seagate... -
Jjwelvaert replied to the thread Install Immich in LXC and map ZFS storage.I followed these instructions exactly (except I used mp1 instead of mp0 as I already have an mp0) and the Immich GUI won't load. Is there something I can check to see why?
-
-
MMHeymann replied to the thread 10Gb Netzwerk erreicht nur 1Gb Geschwindigkeit.Vor rund nem Jahr hätte ich sch*** darauf gesagt. Aber bei den bodenlosen RAM und Speicher Preisen kann einem echt die Laune vergehen. Hab letztes Jahr 32GB Ram für unter 60€ gekauft. Das gleiche Kit kostet ZZ rund 200€. Die beiden 12TB Seagate...
-
Bbeisser replied to the thread 10Gb Netzwerk erreicht nur 1Gb Geschwindigkeit.ok, 2 platten im stripe sollten okish performance liefern (vermutlich irgendwo zwischen 200 und 300 MB/sek), sofern ausser deinem smb kopiervorgng sonst nichts drauf zugreift. gleichzeitig haben die disks aber keinerlei fehlertoleranz. ein...
-
Aalexskysilk replied to the thread Disk constellation for DXP4800."optimal" isnt very meaninful without a use case. what you describe would be served by any combination since you dont have any performance or fault tolerance requirements to speak of, so the only thing remaining is usable capacity. that would...
-
jsterr reacted to t.lamprecht's post in the thread Proxmox Datacenter Manager 1.0 (stable) with Like.
That makes zero sense. The PVE Community subscription is for the PVE enterprise repo, not for the PDM one, just like it is not for the PBS one. So absolutely nothing changed for existing PVE installations, besides you now being able to now also... -
MMHeymann replied to the thread 10Gb Netzwerk erreicht nur 1Gb Geschwindigkeit.Meine TrueNas Hardware sieht so aus: Die beiden HDD's (4GB WD Red Plus) sind als Stipe eingebunden. Ich habe noch keinerlei Erfahrungen mit TrueNas gemacht und wollte das erst mal rumspielen und testen oder ggf. eine andere NAS Software...
-
-
DIs there any estimate for when PVE will ship the new Ceph Tentacle release? I'm excited about the new FastEC optimizations: https://ceph.io/en/news/blog/2025/tentacle-fastec-performance-updates/
-
DDer Harry replied to the thread Setting up remote access to the Gui - From outside the local network.We switched to a self hosted netbird.io
-
Ddavidsg replied to the thread CEPH Erasure Coded Configuration: Review/Confirmation.It is absolutely possible to place multiple chunks on each server while guaranteeing resiliency to hosts going down. You just need to create your pools manually instead of using the proxmox UI. I've been doing this for years on a 3-node homelab...
-
DDer Harry posted the thread CLI based tool to handle acme requests in Datacenter Manager: Installation and configuration.Sorry for asking a (maybe) stupid question. Is there an equivalent for pvenode acme orproxmox-backup-manager acme in pdm? It looks like it's not available in proxmox-datacenter-manager-admin or proxmox-datacenter-manager-client .
-
NNodefield replied to the thread [SOLVED] Super slow, timeout, and VM stuck while backing up, after updated to PVE 9.1.1 and PBS 4.0.20.Sorry, I just mistyped and missed the critical word "not" in "not limited" in my earlier reply. Got it, thank you. I've tried to look through the actual tcp kernel patches involved and I can't pinpoint the mechanism that triggers stall condition...
-
Mmanguy replied to the thread [SOLVED] Cannot access the web-ui from Chrome, but other browsers work (is unreachable.ERR_ADDRESS_UNREACHABLE).Ill leave this up since I found many threads with the same issue. I tried many things including removing unused extensions, and I think more importantly, when visiting the page and seeing the "is unreachable.ERR_ADDRESS_UNREACHABLE" error, I...
-
Ssadpanda replied to the thread Bridge can ping, vlan can ping, container cannot.Going back to simple bridge/enable vlan and specify tag on LXC... my switch registers the mac and shows it in the assigned vlan but no dhcp and no traffi if I tcp dump the nic port I see 09:20:47.221613 LLDP, length 271: ArubaS2500-24P-US...
-
Mmanguy posted the thread [SOLVED] Cannot access the web-ui from Chrome, but other browsers work (is unreachable.ERR_ADDRESS_UNREACHABLE) in Proxmox VE: Installation and configuration.It used to work but suddenly doesnt work. "https://192.168.1.220:8006/" is the address, and like I mentioned, it works if I use safari on the same device. Facts: 1. Other local network device services are reachable from chrome in this same device...
-
Hhisokami98 replied to the thread Proxmox local “dir” storage mount disappeared.The problem is fixed . The problem was that the partition table was missing, so Linux could see the disk but didn’t know where the filesystem started. TestDisk recreated the partition table pointing to the existing ext4 filesystem, which made...
-
Hhisokami98 reacted to cheiss's post in the thread Proxmox local “dir” storage mount disappeared with Like.
What kind of disk is /dev/sda? Is it a hardware RAID? Can you provide the output of lsblk --ascii -M -o +HOTPLUG,ROTA,PHY-SEC,FSTYPE,MODEL,TRAN,WWN /dev/sda and file -s /dev/sda? (You may need to install the file package for the latter first)...
-
MM_D posted the thread Proper way to install Proxmox in UEFI mode. in Proxmox VE: Installation and configuration.I have a Thinkstation P500 which I am using as a PVE server. A week or so ago I installed PVE on this server, from an ISO loaded onto a USB, and all worked well. I have been testing a few VM's etc. Then, a day or two ago, it dawned on me for...
