Latest activity
-
MMennoMega replied to the thread Issues after upgrading to 6.17.4-1-pve.Ok thx man ! That was not the issue but you helped me (sort off). The issue was some default setting in teh bios. When updating the bios the SATA/NVMe is set to "Raid ON" in stead of AHCI/NVMe. See picture. Now the systems are working again ...
-
-
Bbeisser replied to the thread 10Gb Netzwerk erreicht nur 1Gb Geschwindigkeit.das ist eine pcie 2.0 x8 karte. es könnte sein, dass die zu wenige lanes hat. ich was für einem slot ist die denn drin?
-
SStep posted the thread Using Rubrik backups after migrating from VMware to Proxmox VE (possibile?) in Proxmox Backup: Installation and configuration.Hello Proxmox users and team, we are currently using Rubrik as our enterprise backup platform integrated with VMware vCenter. We are evaluating a migration from VMware to Proxmox VE, but we would like to continue using Rubrik for VM-level...
-
MMHeymann replied to the thread 10Gb Netzwerk erreicht nur 1Gb Geschwindigkeit.Meine Hardware: Mainboard ASRock B550M Steel Legend, AMD Ryszen 5 5600G, 32GB DDR4-3200 RAM, Lexar NM 710 1TB M.2280 PCIe 4.0 und 2x 4TB WD Red für's NAS Netzwerkkarte jeweils: 10Gb SFP PCI-e Network Card, Intel 82599(X520-DA1)...
-
news replied to the thread Disk constellation for DXP4800.Then gool luck, you can tell us, how its works for you. I will use this Ugreen DXP4800 only as a NAS. But my Ryzen 5 3500X NAS use ZFS on the boot and data and has 32 GByte DDR4 Ram with 2 NICs. -
Wwarning31 replied to the thread transport_maps = hash:/etc/pmg/transport, proxy:tcp:127.0.0.1:9998.Hello Is there anyone who can answer? How can I separate incoming and outgoing messages here? Can you give me some information on how to do this? The script is written in Perl. Best regards
-
BBernd_909 replied to the thread Disk constellation for DXP4800.The DXP4800 fullfills the listed requirements many times over. Based on other experience reports with the same or similar hardware, that's not only plenty but will still leave the system at 1% loads most of the time. There will rarely be more...
-
Ddaviddanko replied to the thread Issues after upgrading to 6.17.4-1-pve.When I did some chores during the boot, I realized it actually booted for me. But it took a really long time. There was a workaround which was working for me before the BIOS update. Edit the /etc/default/grub by adding zfs_import_skip=1 to the...
-
news replied to the thread Disk constellation for DXP4800.Yes more Ram 32 GByte and more Cores, please read the Proxmox VE System Requirements. The Ugreen DXP4800 is only a NAS, not more! With 8 GB Ram you can't get more.
-
RRheingold replied to the thread Falsche Einträge in VM resolv.conf.Ja. Das Computerproblem sitzt vor der Tastatur.
-
MMennoMega replied to the thread Issues after upgrading to 6.17.4-1-pve.Ok wierd , i have exactly the same SATA controller on my Dell optiplex 7020 with exactly the same issue with the new kernel (6.17.4-1-pve) So i pinned the 6.17.2-1 kernel and everything is working again ( command used : proxmox-boot-tool kernel...
-
Is the internal flash a sd (mmc) card? Then you won't be able to install ProxmoxVE with the regular iso image see https://forum.proxmox.com/threads/unable-to-get-device-for-partition-1-on-device-dev-mmcblk0.42348/ In theory you could first...
-
Ssadpanda replied to the thread Bridge can ping, vlan can ping, container cannot.https://forum.proxmox.com/threads/vlan-setup-for-lxc-containers-vms.168172/ this didn't work either
-
Ssadpanda replied to the thread VLAN Setup for LXC Containers/Vm's.having LXC vlan issues myself and found this. Does creating a linuxVlan on the interface then a bridge on that vlan not do the same thing / work for you?
-
Falk R. replied to the thread 10Gb Netzwerk erreicht nur 1Gb Geschwindigkeit.Da kommen wenigstens 3 GBit. Die Netzwerkkarte scheint OK zu sein. Ob es jetzt an der CPU, den PCI Lanes oder dem Switch liegt, weiß keiner. Dazu müsste man die komplette Hardware kennen. -
Wwissens-hunger replied to the thread Proxmox 8 Upgrade auf 9 Fehler im Log Fenster bei einem LXC.Hallo, kann mir jemand sagen ob das so passt? Vielen Dank und frohen 4ten Advent. Grüße
-
MMHeymann replied to the thread 10Gb Netzwerk erreicht nur 1Gb Geschwindigkeit.Accepted connection from 192.168.2.10, port 55745 [ 5] local 192.168.2.200 port 5201 connected to 192.168.2.10 port 55746 [ 8] local 192.168.2.200 port 5201 connected to 192.168.2.10 port 55747 [ 10] local 192.168.2.200 port 5201 connected to...
-
DDeviC3 replied to the thread CPU Hot plug not working even after making all steps from the docs.Yes, all of those was added
-
Ggctwnl replied to the thread [SOLVED] How to re-enable networking when moving boot disk to new hardware?.Thank you. I searched for a lot of things. I found things that said these rules were regenerated if necessary and I (mis)understood they were implicated in naming of devices. Probably something like this...
-
BBernd_909 replied to the thread Disk constellation for DXP4800.Thank you for the extensive advice. Regarding the nvme ssds, I was already considering either the Kingston DC2000B or the Samsung PM9A3 since both have powerloss-protection. The TBW of the Kingston is rather low with 700TB but I am wondering how...
