Latest activity
-
FFoxhunter_de replied to the thread Ich habe versucht mein Proxmox-Setup abzusichern - Meinungen/Ideen?.Korrekt, das dauert nur ein paar Minuten pro Job. Geht um 2 Uhr, 3 Uhr und 4 Uhr los. Da arbeitet niemand, die Container und VMs werden angehalten, gesichert und fertig. Bei Hetzner habe ich zwei der drei Backupserver, und den eigentlichen...
-
mariol replied to the thread Setting up remote access to the Gui - From outside the local network.Here are two more links for you. Maybe that will help you. https://www.allthingssecured.com/vpn/faq/what-is-wireguard/ https://www.wireguard.com/quickstart/ -
shanreich replied to the thread [SOLVED] Problem migrating VMs in a Proxmox 9 cluster with VLAN on vmbr0..Please update libpve-common-perl from the repositories (it is on no-subscription now) to version 9.1.3 and check again if it works. I tried to reproduce it with that version on my test cluster and wasn't able to. If it still doesn't work, please... -
KKrupskij replied to the thread [SOLVED] Problem migrating VMs in a Proxmox 9 cluster with VLAN on vmbr0..Manually via your path file (link to git) It's a dev cluster, so net config looks like typical. One vmbr0 for all. VM is also with one NIC attached to vmbr0. Can add VLAN tag on stopped VM w/o issues, but editing VM NIC hardware and adding VLAN...
-
Wwursti posted the thread Ceph: High Latency on NVMe SSD in Proxmox VE: Installation and configuration.Hi there, I am having trouble with OSD latency, ranging inbetween 4 to 20 milliseconds: root@pve2:~# ceph osd perf osd commit_latency(ms) apply_latency(ms) 3 11 11 0 12 12...
-
-
aaron replied to the thread ARM64 Guest on PVE9 Node possible?.The pve-edk2-firmware-aarch64 package should be available in all repositories, test, no-subscription and enterprise from what I can see. The latest version in the enterprise repo is pve-edk2-firmware-aarch64_4.2025.05-2_all.deb -
Ttlobo replied to the thread High latency and catastrophic write performance with iSCSI + shared LVM.In case it helps: https://www.dell.com/support/kbdoc/en-us/000124601/me4-md-series-combined-linux-mpio-multipath-conf https://infohub.delltechnologies.com/section-assets/powervault-me4-series-linux Also check if the pools are set to...
-
shanreich replied to the thread [SOLVED] Problem migrating VMs in a Proxmox 9 cluster with VLAN on vmbr0..Did you apply it manually or upgrade via our repositories? How does the network configuration of the VM and the host look like? cat /etc/network/interfaces qm config <VMID>
-
shanreich replied to the thread Working SDN completely broke after applying a change.The fix for that had only been published to no-sub yesterday in the afternoon, so it is quite likely that you didn't yet have the fix available at that point.
-
EElleni posted the thread change spice setting by non root account in Proxmox VE: Installation and configuration.The error message indicates that for enabling spice options you need to be root. Question: So it is not possible to assign the right to enable spice settings to an ldaps group to a role with certain priviledge?
-
Ss.meier77 replied to the thread Was ist eigentlich der richtige Weg, einen Trunk in Proxmox zu verwenden ohne dedizierte vlan Konfiguration für VMs.@Falk R. Die Bridge darf aus meiner Sicht in dem Fall überhaupt nicht vlan-aware sein. Sonst werden die vlan Tags weitergereicht.... Wenn aber ein Host - vlan SubInterface verwendet wird, ist das kontraproduktiv. Ja, dass ist mir auch schon...
-
EElleni replied to the thread ARM64 Guest on PVE9 Node possible?.Are there some instructions anywhere on howto provide own aarch64 OVMF firmware to work along with pve9 enterprise repository.
-
KKrupskij replied to the thread [SOLVED] Problem migrating VMs in a Proxmox 9 cluster with VLAN on vmbr0..shanreich, applied your path, VM migrations were successful, but hit another issue - when changing VM NIC settings (VLAN TAG added) got Parameter verification failed. (400) net0: hotplug problem - no physical interface on bridge 'vmbr0'...
-
EllerholdAG replied to the thread Message "No valid subscriptions".You can keep your existing community licenses which nets you everything you paid for (PVE & possibily PBS) OR you can upgrade your community licenses to basic in order to get a new product (PDM). OR you can go back to vmware and pay 20x. -
LLKo replied to the thread Super slow, timeout, and VM stuck while backing up, after updated to PVE 9.1.1 and PBS 4.0.20.Not LACP or bonding, just "plain" 25gbe NICs with a bridge on them so that PBS as a VM on PVE can have a leg into that 9000MTU network.
-
Bbeisser replied to the thread ZFS SSD Migration Consumer zu Server SSD.was sind das denn genau für ssds, die du dir gekauft hast? bisher wissen wir nur intel und 960GB, aber nicht, welcher formfaktor und schnittstelle. es ist äusserst ungewöhnlich, dass nicht beide ssds laufen. laufen denn beide jeweils einzeln in...
-
FFrancisS replied to the thread HA affinity problem (?).It is not part of the file
-
dakralex replied to the thread HA affinity problem (?).From the old resources.cfg from Nov 12 it seems that the HA groups were never fully migrated. Was the ` at the end an artifact of embedding it as code int he forum or was that part of the file? Either way, great to hear that your problem has... -
Bbeisser replied to the thread Seltsames HA Verhalten.das war mehr an diejenigen gerichtet, die das lesen und das umsetzen wollen, weniger an dich :)
-
FGood day Community I have recently been moving all my machines over to proxmox, now we want to build the dedicated backup server, however my R710 Dell Raid Controller (Perc H700) is apparently not able to support pass through, and as such i had...
