When needing to set up a thinpool over LVM RAID1, these 4 liners have always worked for me.
pvcreate /sda5 /sdb5
vgcreate vg-b /dev/sda5 /dev/sdb5
lvcreate --type raid1 -m 1 -l 97%FREE -n proxthin vg-b
lvconvert --type thin-pool...
The problem is that PVE is meant to be flexible and used with various methods of storage. I tend to agree that the zfs and disk sections ought to be combined into one, but for my use case I dont use ANY of those at all as my storage is either...
Hallo Forum,
ich nutze Proxmox jetzt seit knapp einem Jahr und bin wirklich begeistert. Debian verwende ich seit etwa 15 Jahren. Die aktuelle Proxmox-Installation habe ich auf mein bestehendes Debian 12 aufgesetzt.
Nun steht das Update von...
Habe jetzt neun neue Festplatten verwendet jetzt drei OSD pro Node.
Write und Read ist jetzt noch besser im Ceph Benchmark aber in der Windows Umgebung nicht Spürbar werte sind dort gleich. Ist es echt so das ich mit drei Nodes diese Performance...
Man könnte zusätzlich jeden SSH-Login per E-Mail protokollieren.
Ich habe das bei mir über eine Postfix-Installation umgesetzt: Systemmails, z. B. von Fail2Ban oder bei SSH-Logins, werden an eine E-Mail-Adresse versendet und von dort an eine...
Looking at the documentation, the vendor, product, and several other things appear to be incorrect. I don't have a Dell device, but the correct configuration would be something like this:
defaults {
user_friendly_names yes...
Hi,
this might indicate that you have a leftover empty ct/100 group folder in your datastore. These are not shown in the UI. Groups are cleaned up if all the snapshots containing it are pruned, there was however a different behavior in older...
Looking at the documentation, the vendor, product, and several other things appear to be incorrect. I don't have a Dell device, but the correct configuration would be something like this:
defaults {
user_friendly_names yes...
Man könnte zusätzlich jeden SSH-Login per E-Mail protokollieren.
Ich habe das bei mir über eine Postfix-Installation umgesetzt: Systemmails, z. B. von Fail2Ban oder bei SSH-Logins, werden an eine E-Mail-Adresse versendet und von dort an eine...
Strongly agree ... disk management is a nigthmare.
Thank you for your schema, it helps me a lot in the hide-and-seek game of "where the H... is hidden the information I need"
Hallo,
mein HomeLab ist segmentiert. Management der PVE Nodes und Storage sind in zwei unterschiedlichen Netzen.
192.168.71.0/24 für Managment 2.5 GBE
192.168.72.0/24 für Storage 10GBE SFP+
Im PBS habe ich 192.168.71.50/24 für Management und...
Sehr gutes und durchdachtes Setup. Mein Setup sieht ähnlich aus. Was ich noch anders mache
Ich synchronisiere meine 3 Backup-Lokationen noch gegeneinander, d.h. ich habe an jeder Lokation den gleichen Datenbestand aller Standorte kombiniert
Ich...
Das macht einen Cluster-Kommunikation kaputt, für den Aufbau eines Clusters also root-Login wieder erlauben. Passwort-Login kann und sollte man aber natürlich deaktivieren.
Für die Backups rate ich dringend auf pull-backups ( per vpn)...