Latest activity
-
Bbartvh replied to the thread "sshkeys":"invalid format - invalid urlencoded string.FYI, I created an account on this forum just to thank you for saving me some brain injury. I don't like doing it this way either, but at least it works, unlike any variant of urlencode filter in a template string I tried.
-
mariol replied to the thread Update internal signed SSL certificate on Proxmox VE node.You have to install your CA-Certificate from your chain into your client too. On Windows there should be some certmanagement, and on Linux you can place your CA to "/usr/local/share/ca-certificates" and execute update-ca-certificates. I recommend... -
Falk R. replied to the thread Write Back (safe) + Pure Storage – sinnvoll für produktive Windows-Server?.Theoretisch kannst du das machen, ich aktiviere den Write Cache bei DB Servern aber nie. Wenn du eine Pure FA hast und keine Lizenzbeschräkungen im Storage dagegen sprechen, benutze lieber NVMe over TCP. Den Unterschied zu iSCSI merkst du bei DB... -
Rririmia reacted to proxuser77's post in the thread Proxmox hardening - Proxmox iso vs Debian iso? with
Like.
Well, then I would say that it mainly depends on whether the disks need to be encrypted or not. If not, Proxmox Installer; if so, Debian 13 and then Proxmox on top of it. -
LLKo replied to the thread [SOLVED] Super slow, timeout, and VM stuck while backing up, after updated to PVE 9.1.1 and PBS 4.0.20.Ok, so 6.17.11-4-test-pve completed a round of normal backups without hiccups. Happened in the past as well, so can't yet be sure if it's really fixed. Testing 6.18+416dd649f3aa now. If both go through the backups without issue, I'll test...
-
Uuzumo replied to the thread [SOLVED] kernel: landlock - Error on VM boot - assistance required.I'm not sure if it was a change in the operating specifications or a bug, but I'm glad it's fixed. If it's a working configuration, I don't think it has any adverse effects.
-
LLongQT-sea posted the thread [TUTORIAL] Proxmox VE 9 Live Boot ISO Image in Proxmox VE: Installation and configuration.Hi everyone, I'd like to share a project I've been working on: a fully customizable Proxmox VE 9 live boot ISO image. What is it? A Proxmox VE live boot ISO image that can run directly from USB SSD drive, or from Ventoy USB drive, no...
-
Jj.gelissen replied to the thread Write Back (safe) + Pure Storage – sinnvoll für produktive Windows-Server?.Ich hätte dazu noch eine abschließende Frage: Wir arbeiten mit einer Pure Storage FlashArray (Pure Station Array) in Kombination mit iSCSI und Multipath. Zusätzlich ist vor dem Storage und den Servern eine USV geschaltet. Unter diesen...
-
Uuzumo reacted to DerekG's post in the thread [SOLVED] kernel: landlock - Error on VM boot - assistance required with Like.
Issue resolved. As per the post, I had to both upgrade the firmware on the SATA controller AND set Rombar to off (where it defaults to on) in order for the kernel 6.14 or later to allow the VM to fully boot. I should have recognised this fault...
-
DDerekG replied to the thread [SOLVED] kernel: landlock - Error on VM boot - assistance required.Issue resolved. As per the post, I had to both upgrade the firmware on the SATA controller AND set Rombar to off (where it defaults to on) in order for the kernel 6.14 or later to allow the VM to fully boot. I should have recognised this fault...
-
mariol replied to the thread Setting up remote access to the Gui - From outside the local network.Welcome to the Proxmox Community :) You can set up simple port forwarding to port 8006 in your firewall/router (I would recommend 2-factor authentication for Proxmox VE), or, as you have already done correctly, set up a VPN with Wireguard. WG...
-
Ppsaintemarie replied to the thread Proxmox install on Minisforum ms-01.Yep sorry, it just give me a "error: you need to load the kernel first" I have the boot SSD on the m2/u2 port and 2 ssds on the other two. Bios default settings. Secure boot enabled.
-
Uuwka77 replied to the thread NAS UGreen DXP4800 Plus.Ich glaube mittlerweile, dass das mein Hauptproblem ist. Würde gern mit mehr RAM testen, aber der ist im Moment einfach zu teuer. Werde mal OMV ohne ZFS testen. Soll auch einfacher zu administrieren sein.
-
mariol replied to the thread Disk Passthrough vs qm.Welcome to the Proxmox Community :) Adding a physical drive via the WebUI is currently only possible for LXC. For VMs, there are a howto in the wiki, which you have probably already found. There is already a feature request for this.
-
Ggoseph replied to the thread Proxmox install on Minisforum ms-01.Any Error Message, any Log we can work with? Which settings? Otherwise it will be hard to help.
-
FFrancisS replied to the thread HA affinity problem (?).Hi Daniel, Options "Cluster Resource Scheduling" = Default Ha status with all VMs node renamed. Best regards. Francis
-
LLKo replied to the thread [SOLVED] Super slow, timeout, and VM stuck while backing up, after updated to PVE 9.1.1 and PBS 4.0.20.At the moment it is root@prx-backup:~# cat /proc/sys/net/ipv4/tcp_rmem 4096 131072 6291456...
-
Ppsaintemarie replied to the thread Proxmox install on Minisforum ms-01.I've just received my MS-01 and testing PVE9 and I'm seeing something weird where when I install additional NVMe SSD, the setup fails to boot. I've been troubleshooting this for a few days and it looks like this is related to the additional NVMe...
-
cwt replied to the thread Proxmox x Hyper-V storage performance..64K volblocksize is the sweet spot for Windows VMs execpt database or file servers. Pure AD controllers should also use zvols with 16K blocksize. MS SQL server for example: 1x vssd with 64k for the OS installation only. 2nd vssd for SQL data...