Latest activity
-
fstrankowski replied to the thread Some LXC do not start automatically after a reboot.Could you try giving the pool some more time pre- and post init? Sounds to me like a ZFS-Timing issue (see here): nano /etc/default/zfs ZFS_INITRD_PRE_MOUNTROOT_SLEEP='5' ZFS_INITRD_POST_MODPROBE_SLEEP='5' update-initramfs -u -
UUnsubtle9244 replied to the thread Can't backup 1 VM to Proxmox Backup Server.Hi, I also had a similar problem and did not find the solution at first. For testing I disabled fs-freeze flag (uncheck "Freeze/thaw guest filesystems on backup for consistency" in QEMU Guest agent section of VM options). Backup went well...
-
BJohannes S trifft es im Großen und Ganzen recht gut, hier nur noch ein paar eigene Worte dazu. Vorab eine wichtige Klarstellung. Wir haben nur eine Lizenz, und das ist die AGPLv3. Die Subscriptions bietet zusätzliche Services an, aber an der...
-
fstrankowski replied to the thread [SOLVED] Lan Zugriff bricht einfach ab.Wenn Du eh ein neues MB bekommst, dann spar dir das Geld und teste das System nach dem Umbau. Ich gehe davon aus, dass es dann ohne Probleme läuft. Ich habe den Fehler wirklich über Tage gedebuggt und es gibt einfach keinen zufriedenstellenden...
-
This is not uncommon as many devices don't reset properly and does not have to be a problem. If your GPU does not reset properly (which is most likely the case) then you need to make sure nothing touches the GPU during the Proxmox boot process...
-
BDie Lizenz ist ja eh frei. Die Subscription bietet einen Mehrwert, wofür der Preis dann aufgerufen wird. Ich verstehe das Problem nicht mal eben OK zu klicken, das ist irgendwann auch im Musclememory und man merkt es gar nicht mehr. Wenn kein...
-
Tried everything in there and still not working. error writing '1' to '/sys/bus/pci/devices/0000:03:00.0/reset': Inappropriate ioctl for device failed to reset PCI device '0000:03:00.0', but trying to continue as not all devices need a reset...
-
fstrankowski replied to the thread Problem moving PVE from one motherboard to another.I somewhat suspect that the error is just within the ZFS-Import while booting the system. Did you try booting with a Proxmox-ISO into Rescue Mode (with shell + zfs tools) to import the pool manually?
-
fstrankowski replied to the thread RFC: Neuer Lizenztyp "NAG"..Danke Thomas für das ausfühliche Feedback. Das war hilfreich und hat einige Blickwinkel eröffnet welche ich so nicht auf dem Schirm hatte, besonders aufgrund der langen Zeit wie ihr schon am Markt seit (ich bin jetzt seit ~ 14 Jahren dabei)...
-
Johannes S trifft es im Großen und Ganzen recht gut, hier nur noch ein paar eigene Worte dazu. Vorab eine wichtige Klarstellung. Wir haben nur eine Lizenz, und das ist die AGPLv3. Die Subscriptions bietet zusätzliche Services an, aber an der...
-
Ttorroe replied to the thread Proxmox Backup Server (PBS) 4.1.0 causing S3 InternalError (500) during Garbage Collection (GC).I have great news: The issue is resolved! I contacted FileLu support with the technical details provided here. They investigated the matter and updated their S3 API implementation to support the operations required by PBS 4.1.0. Garbage...
-
SSteveITS replied to the thread Migrating Win2022 VM from Esxi (boot fail).FWIW PVE has docs for this: https://pve.proxmox.com/wiki/Paravirtualized_Block_Drivers_for_Windows#Setup_On_Running_Windows. Basically, the post above.
-
Ssoupdiver posted the thread Anyone managed to passthrough the onboard audio of a WRX 80 Creator to a windows vm? in Proxmox VE: Installation and configuration.I have a smooth runing gaming VM running (win 11) but no matter what I try I dont get to passthrough the onboard audio and partially wifi/bt. I passes through both PCI devies but the audio never shows up anywhere in the windows system and bt the...
-
Jjohn.gonzalez replied to the thread Migrating Win2022 VM from Esxi (boot fail).Thanks a lot, it still working on dec 2025
-
Jjohn.gonzalez reacted to mram's post in the thread Migrating Win2022 VM from Esxi (boot fail) with
Like.
Hardware / select the existing Hard Disk, click Detach. Double click the unattached disk and use IDE for controller type. Then go to Options and fix the Boot Order for IDE. Power it up. -
Rrandymartin reacted to fabian's post in the thread Proxmox 9.1.2 HA migration issues when rebooting node. with Like.
qemu-server 9.1.3 available on pve-test now should fix this issue. affected VMs do need to be stopped and started (or live-migrated *outside of a node reboot/shutdown!) for the fix to take affect.
-
Rrandymartin reacted to fiona's post in the thread Proxmox 9.1.2 HA migration issues when rebooting node. with Like.
Hi, thank you for the reports! Initial patches were proposed on the mailing list: https://lore.proxmox.com/pve-devel/20251217131724.118681-1-f.ebner@proxmox.com/
-
AA. Kaulfuß reacted to dakralex's post in the thread [SOLVED] Problems Importing from ESXi with Like.
Thanks for getting back to the post! It's never bad to have an answer after all ;) Consider to add a "[ SOLVED ]" prefix to the post, so that others can see that they might find an answer here. Thanks a lot!
-
AI know this post is a little old but I wanted to report back with the solution. We found that the subnet mask on the host was incorrect. It was configured as a /24 when it should have been a /16. I would never had thought to check this as the...
-
FFabriceG74 replied to the thread Disks (zfs / storage / devsd? / etc ).Strongly agree ... disk management is a nigthmare. Thank you for your schema, it helps me a lot in the hide-and-seek game of "where the H... is hidden the information I need"