Latest activity
-
fstrankowski replied to the thread Trixie Updates Question.Ubuntu/Debian are binary compatible so that should not be a problem. The latter though is what i suspected in my previous post aswell. @spetrillo You could try downgrade to an older kernel and try rebuild the module again but then you're stuck... -
JJohannes S reacted to ucholak's post in the thread Proxmox x Hyper-V storage performance. with
Like.
:( you are welcome. i forget to mentioned that all my hosts are linux OS (non-windows). i was really curious how windows will stand. thanks much for quick check/benchmark, it will be helpful for many people. Virtio SCSI should be used for... -
Ddastrix80 posted the thread Lower iperf performance in Truenas VM compared to Proxmox host? in Proxmox VE: Networking and Firewall.Hi All Using MTU 9000 and Cisco 3850 10gbit switches, my PC (physical windows 11 machine with Mellanox 10Gbit nic), Proxmox and the Truenas VM all running MTU 9000 and 10gbit. No errors, optical interfaces. Proxmox showing good performance ...
-
Mmarkf1301 replied to the thread Confused on bonds, interfaces...Thanks for the clarification. I didn't know that would happen. I'll make the change tomorrow and see what happens. Just found out the Fortigate 148 switches will do LACP, but not MCLAP between the 2 different boxes so I'll make that change as...
-
Bbl1mp replied to the thread Unraid als VM verliert unregelmäßig seinen USB Boot Stick Passthrough.mhm, ja die Samsungsticks sind eigentlich aus dem qualitativ besseren Segment. Du könntest ggf. mal schauen, ob es für das Mainboard neuere Biosfirmwarepakete gibt. Ansonsten könntest du mit udevadm monitor dir mal die Kernelevents auf Host und...
-
Aalexskysilk replied to the thread Confused on bonds, interfaces...Thats actually not necessary. PVE will automatically deploy interfaces.new on boot if present. just create the file and reboot. Incidentally, this configuration will work the same as the original one in any case, since only one of the bond slaves...
-
JJohannes S reacted to fstrankowski's post in the thread Problem nach Update von PVE 8 zu 9 with Like.
Du hast nachdem Du Proxmox installiert hast ein Script ausgeführt, welches dafür sorgt, dass der sogenannte "Nag-Screen" in Proxmox entfernt wird. Das geschieht durch Manipulation von Dateien innerhalb des Proxmox-UIs. Nach dem Update von...
-
Sspetrillo replied to the thread Trixie Updates Question.I did not...this is getting to the limit of my compilation skills, so not sure if I want to keep going. What I also did is build a Debian 13.2 server with 6.17 kernel. I want to run through the process on this and see if it fails. Intel gets...
-
Bbeisser replied to the thread GMKTEC K12 | Ryzen 7 H 255 | Problem with IGPU.the guy who helped you in that reddit post is actually me. i only got it to work with these args. i tried other things, but after getting nowhere for a few days i settled on this. i still dont have any hdmi/dp output, but i dont care about that...
-
Kkarel.kryda replied to the thread [SOLVED] Super slow, timeout, and VM stuck while backing up, after updated to PVE 9.1.1 and PBS 4.0.20.I tested the aforementioned kernel 6.17.11-3-test-pve, and the very first backed-up VM froze and hung after a minute. My backups are performed on two Proxmox nodes, and while the backup on the first node froze immediately during the first VM and...
-
fstrankowski replied to the thread Trixie Updates Question.That doesnt look like anything related to Linux/PVE but instead to the certain Kernel calls which have been renamed? or rewritten between older and newer Kernels and your driver tries to call functions which have been renamed and thus the...
-
MMadozu reacted to SteveITS's post in the thread if reboot is triggered pve node goes away too fast before ha migration is finished with Like.
Another way to migrate all VMs (and have them migrate back to the same server) is to enable maintenance mode. On any server run: ha-manager crm-command node-maintenance enable pve1 (wait for migration, then reboot) ha-manager crm-command...
-
BBR6 replied to the thread GMKTEC K12 | Ryzen 7 H 255 | Problem with IGPU.here is my geekbench 6 cpu results https://browser.geekbench.com/v6/cpu/compare/15610159?baseline=15609827 Seems their is a difference, but then the gpu resets or disables and reenables in device manager
-
Wäre ich sofort, und sicher auch andere dabei:)
-
Mir ist gerade, aufgrund eines anderen Threads hier eine Idee gekommen, welche ggf. im Interesse der Entwickler sein könnte. Wir haben ja bereits diverse Lizenzmodelle zur Verfügung. Die günstigste Lizenz hierbei ist die "Community"-Lizenz...
-
Sspetrillo replied to the thread Trixie Updates Question.Unforunately the make fails bc its looking for linux headers and not PVE headers. Is there a way to edit the script to change this? ** The target kernel has CONFIG_MODULE_SIG_ALL enabled, but *** the signing key cannot be found. Module signing...
-
fstrankowski replied to the thread Problem nach Update von PVE 8 zu 9.Du hast nachdem Du Proxmox installiert hast ein Script ausgeführt, welches dafür sorgt, dass der sogenannte "Nag-Screen" in Proxmox entfernt wird. Das geschieht durch Manipulation von Dateien innerhalb des Proxmox-UIs. Nach dem Update von...
-
Jjamespanic replied to the thread [TUTORIAL] Deployment Tips.The URL linked at the top is no longer valid. The correct URL is https://pmg.proxmox.com/wiki/Getting_started_with_Proxmox_Mail_Gateway
-
Mmarkf1301 replied to the thread Confused on bonds, interfaces...thanks on the lacp thing. I presume you referenced the file with .new so that I can create the new file with the .new extension and then cp interfaces interfaces.old (to keep what I have) and then cp interfaces.new to interfaces so that I'm...
-
fstrankowski replied to the thread Live migration sometimes hangs at the very end (Proxmox VE 9.1.2 / shared SAN storage).Could you lease provide more logs to work with? I'd like to see a syslog on both sides, source and destination while the migration is in progress/at point of stalling. Regarding your questions, i just have to call a "check the forums" as i'm not...