Latest activity
-
fstrankowski replied to the thread authentication failure.Besides what @bbgeek17 said, i'd suggest you either setup Proxmox Managment Side to only be accessible via VPN - or - if you know Linux, you can just close port 8006 and tunnel it through SSH and thus only need SSH open via firewall. You can... -
JJohannes S reacted to VictorSTS's post in the thread Previous chunks don't seem to be used for new backups with
Like.
After a local sync from the namespace where PBS02 stored the synced snapshots to the namespace where PVE stores it's backups, now PVE only transfers changed data and in most cases even uses the existing dirty-map (I suspect dirty-map can be... -
Ffutiless replied to the thread MS-A2 Minisforum (AMD Ryzen™ 9 9955HX + Radeon™ 610M) – The “I Finally Stopped Crying” Zero-Artifact iGPU Passthrough Thread.UPDATE Cleanup of Startup and Shutdown script for no lingering disabled devices in device manager. : @echo off :: ================================================ :: EnableiGPUPassthrough.bat :: Purpose: Fully enable AMD iGPU passthrough...
-
-
HYou have to turn off the setting called resist finger printing. I ran into this myself, turning it off fixes it, and I'm able to use the built-in console. https://github.com/novnc/noVNC/issues/1882
-
bbgeek17 replied to the thread authentication failure.Hi @Jacx , welcome to the forum. Looks like you exposed your PVE to the Internet and as such you are subject to immediate automated attacks. I would highly recommend rethinking your deployment, or, at the very least, implementing very strict... -
Mmarkf1301 replied to the thread Confused on bonds, interfaces...A couple of assumptions. 1. this is regarding the pvepbr box which currently only has 1 interface connected to the switch. Correct? 2. this will create the 'bond' or bond0 for both of those interfaces. 3. i'm unsure about lacp on the switch. I...
-
EErnie95 posted the thread Error message : no session known in Proxmox VE: Installation and configuration.Hi All, I see this recent error message : pve (sd-pam)[483032]: pam_systemd(systemd-user:session): Failed to release session: No session '2994' known On my side : - 2 last updates of PVE 9.x - update of LXC - installation new LXC (pulse) based...
-
VictorSTS replied to the thread Previous chunks don't seem to be used for new backups.After a local sync from the namespace where PBS02 stored the synced snapshots to the namespace where PVE stores it's backups, now PVE only transfers changed data and in most cases even uses the existing dirty-map (I suspect dirty-map can be... -
Aaluisell replied to the thread vm migration error on node reboot.I found it seems to be due to a bug reported already https://bugzilla.proxmox.com/show_bug.cgi?id=7092
-
JHi all, i am new to proxmox, just installed this week. when i check the log is see constant errors about login failure. can some one tell me if this is normal. Dec 16 18:26:46 pvedaemon[1101]: authentication failure; rhost=::ffff:141.98.11.50...
-
Dddanh512 replied to the thread VM Window Freeze after Backup to PBS.Same issues here, Backing up VM Window Server 2016, end everything go hang/stuck, must reboot to normal operate
-
SHello all, How do Trixie kernel updates get folded into Proxmox? For example I have a Debian Trixie 13.2 server. I have an Intel E610 10g adapter in the server. The kernel driver for this is old, so I can compile a more recent driver and then...
-
DHello, Have anyone face a strange behavior of VM Window after Backup to PBS: lagging ? I even have to force stop VM. To avoid error 8194, I have config in Window following to the doc VM Backup Consistency - Proxmox VE : VSS set to 5, dcomcnfg...
-
UdoB replied to the thread IO Pressure Stall.Perhaps because ZFS does write much more often than LVM. That graph shows an average below 0.15 percent. Do you feel that's a problem? -
Dddanh512 replied to the thread [SOLVED] Super slow, timeout, and VM stuck while backing up, after updated to PVE 9.1.1 and PBS 4.0.20.Just weird that when I backup the VM have SQL Server running on that, it's fine, but all another VM does not have SQL Server, all hangs up/stuck, must restart
-
Iinformant replied to the thread Update Installed -- System booted in EFI-mode but 'grub-efi-amd64' meta-package not installed!.hi all, i have same issue, i have installed package "grub-efi-amd64" than i make reboot after command: echo 'grub-efi-amd64 grub2/force_efi_extra_removable boolean true' | debconf-set-selections -v -u comes update-initramfs -u -k all what...
-
Ffdcastel replied to the thread Proxmox x Hyper-V storage performance..Update: I rebuilt the VMs using Virtio SCSI, and performance again reached roughly double that of Virtio Block (matching the results seen when the drives were formatted with 512-byte blocks). This indicates that switching the NVMe block size...
-
Pptselios replied to the thread VLAN and SDN struggles.OpenWRT is linux based, so it should work. No, Firewall in PVE has no rules. I will dig a bit deeper. My first attempt will be to use plan old VLANs on PVE to replicate what I got in RHEL.
-
Dddanh512 reacted to GE_Admin's post in the thread [SOLVED] Super slow, timeout, and VM stuck while backing up, after updated to PVE 9.1.1 and PBS 4.0.20 with Like.
Everyone in this thread is facing this... Rollback to Kernel 6.14 to temporarly fix the problem.
-
Ccoderjoe replied to the thread Auto Migration doesn't work when using "reboot" button in webgui.I'm also experiencing the same. Maintenance mode works fine, and VMs migrate without issue. Manual migration also works fine and VMs migrate without issue. But if I try and reboot with it triggering VM migration the migrations fail. My cluster...
-
