Sorry for getting your hopes up :(
The load skyrocketted to 300 and the NFS shares are unavailable. This only occurs on this VM, not on bare-metal server.
I wish we could downgrade to PVE8 :(
Thank you everyone for the help.
That was kind of my conclusion. The only doubt is that from what I saw installing windows on zfs and lvm on pve2 the difference is massive, while on a native 9.1 test machine it was way less noticeable, so I...
please post a backup task log.
client-side deduplication can only happen if there is a previous snapshot on the backup target (datastore+namespace+group!) that is not a in a verification-failed state. based on your description I suspect you have...
I have problem with PBS 4.1 and PVE 9.1, while I backed up the VM Window Server 2016, VM get Stuck/Hangs, can not do anything until I rebooted the VM, so bad issues for production VM. Have anyone facing this?
here's what to do.
create a new file named /etc/network/interfaces.new with the following content:
auto lo
iface lo inet loopback
iface eno1 inet manual
iface eno2 inet manual
auto bond0
iface bond0 inet manual
bond-slaves eno1...
Since the original need was for another server, specifically a PBS we decided to go with 1 8-bay unit from 45homelab.com. It's in production now and should be 'here' and in place next week. Then the next steps, will be to sync the current...
I think this is maybe bug or analyze of older state (blk missing queues?).
In beginning of chapter, you have:
From my study and usage:
scsi translates scsi commands to virtio (virtqueues) layer (overhead, ~10-15%), and has NOW only...
Dir ist hoffentlich klar, dass solche Scripte hier nicht gerne gesehen sind. Du kannst die Hook hiermit entfernen
rm -f /etc/apt/apt.conf.d/pve-no-subscription-message
Weil sie die "Werbung" von den Proxmox Produkten entgegen den Wünschen der Entwickler deaktivieren. Es gibt nicht ohne Grund keine Funktion diese zu deaktivieren. Zudem sorgen die sed basierten Scripte immer wieder für Probleme wie zB...
Yes I saw that, still, the TCP traffic doesn't seem to reach your PVE node - judging from the tcpdumps - and OpenWRT seems to send a TCP RST.
This usually happens when a REJECT firewall rule triggers, hence why I asked to double-check for...
It looks like I managed to implement this successfully with the following hookscript
#!/bin/bash
if [ "$2" == "pre-start" ]
then
echo "Move the disk from NAS to SSD"
nohup /usr/sbin/qm disk move "$1" sata0 local-zfs --delete true...
Hello,
We are experiencing intermittent issues with live migrations hanging at the very end on Proxmox VE 9.1.2.
The migration starts correctly, runs for a while, but sometimes never finishes, remaining stuck indefinitely.
This happens only at...
I did edit both files. on the /etc/hosts file i made a change from
x.x.x.x pve.home.arpa pve to x.x.x.x nocpve.home.arpa nocpve
and on the /etc/hostname file I made the change from pve to nocpve.
restarted the box and got the screen shot...
I have an Alder Lake CPU and using the CPU host. If I enable WSL2 or Hyper-V, Windows gets stuck on boot, just like what you experienced. To get it to boot, I have to temporarily switch to Skylake-Client-v4.
Hello,
Have anyone face a strange behavior of VM Window after Backup to PBS: lagging ? I even have to force stop VM.
To avoid error 8194, I have config in Window following to the doc VM Backup Consistency - Proxmox VE : VSS set to 5, dcomcnfg...
It's quite normal for an IPv6 gateway to use a link-local address.
Does it make a difference which container you use? What distribution is it? Are you using SLAAC or static IPv6?