Latest activity
-
Mmikeely replied to the thread vzdump causing huge number of SELinux denies on Rocky 9.7 VMs.Was hoping maybe someone else has seen this, or perhaps one of the Proxmox folks has a notion of where to poke at to better understand the issue...
-
Ttiboo86 posted the thread Live migration sometimes hangs at the very end (Proxmox VE 9.1.2 / shared SAN storage) in Proxmox VE: Installation and configuration.Hello, We are experiencing intermittent issues with live migrations hanging at the very end on Proxmox VE 9.1.2. The migration starts correctly, runs for a while, but sometimes never finishes, remaining stuck indefinitely. This happens only at...
-
Mmarkf1301 replied to the thread Renaming the server - missed the /storage cfg.I did edit both files. on the /etc/hosts file i made a change from x.x.x.x pve.home.arpa pve to x.x.x.x nocpve.home.arpa nocpve and on the /etc/hostname file I made the change from pve to nocpve. restarted the box and got the screen shot...
-
LLongQT-sea replied to the thread Windows VM stuck on boot with CPU type set to host.I have an Alder Lake CPU and using the CPU host. If I enable WSL2 or Hyper-V, Windows gets stuck on boot, just like what you experienced. To get it to boot, I have to temporarily switch to Skylake-Client-v4.
-
Ddung.pm posted the thread VM Window Freeze after Backup to PBS in Proxmox VE: Installation and configuration.Hello, Have anyone face a strange behavior of VM Window after Backup to PBS: lagging ? I even have to force stop VM. To avoid error 8194, I have config in Window following to the doc VM Backup Consistency - Proxmox VE : VSS set to 5, dcomcnfg...
-
-
SServerhamster replied to the thread Proxmox 9 - Bridge - IPv6 - LXC Container problem!.It's quite normal for an IPv6 gateway to use a link-local address. Does it make a difference which container you use? What distribution is it? Are you using SLAAC or static IPv6?
-
shanreich reacted to d0glesby's post in the thread [SOLVED] Problem migrating VMs in a Proxmox 9 cluster with VLAN on vmbr0. with
Like.
Stefan, I've updated with the latest patch, here's the latest output when migrating a VM: 2025-12-16 11:13:46 use dedicated network address for sending migration traffic (10.XX.XX.XX) 2025-12-16 11:13:46 starting migration of VM 273 to node... -
Dd0glesby replied to the thread [SOLVED] Problem migrating VMs in a Proxmox 9 cluster with VLAN on vmbr0..Stefan, I've updated with the latest patch, here's the latest output when migrating a VM: 2025-12-16 11:13:46 use dedicated network address for sending migration traffic (10.XX.XX.XX) 2025-12-16 11:13:46 starting migration of VM 273 to node...
-
Ffdcastel replied to the thread Proxmox x Hyper-V storage performance..Thank you, @ucholak, for sharing your experience and expertise -- I really appreciated it. You gave me a glimpse of hope, but unfortunately it faded rather quickly :) I reformatted my NVMe drives to 4K using: nvme format /dev/nvme2n1...
-
Dd0glesby replied to the thread 8.4/9.1 Dell r730 kernel: sd 0:0:0:0: Power-on or device reset occurred error.Make sure you have all of your firmware updated on the R730 motherboard and RAID controller.
-
shanreich replied to the thread [SOLVED] Problem migrating VMs in a Proxmox 9 cluster with VLAN on vmbr0..Thanks for testing! Sent a revised patch: https://lore.proxmox.com/pve-devel/20251216160513.360391-1-s.hanreich@proxmox.com/T/#u
-
Jjulyat replied to the thread Bonded ethernet uplinks broken in pve-common 9.1.1.well i got myself a simple patch but its not well tested so im not gonna post it out at least now i can start those vms
-
Dduffyevan reacted to Danie de Jager's post in the thread from Manual: qm.conf: What does Protection do exactly? with Like.
Hi, I'm busy harding a Proxmox Host and going through the settings I see "Protection" and in the help documents it states (and I've not been able to find anything on this subject. Is this purely so users cannot delete the VM until they turn this...
-
Dduffyevan reacted to Fantu's post in the thread from Manual: qm.conf: What does Protection do exactly? with Like.
This thing is not intuitive or documented (and I also looked for it arriving here), I think it is useful to add a "help" link to the documentation that specifies it as there is for other fields but not for this one.
-
Dduffyevan reacted to proxiarch's post in the thread from Manual: qm.conf: What does Protection do exactly? with Like.
Just dropping the obligatory "Still, also why I am here..."
-
Dduffyevan reacted to h&j's post in the thread from Manual: qm.conf: What does Protection do exactly? with Like.
Same here as a semi-new user
-
Dd0glesby replied to the thread [SOLVED] Problem migrating VMs in a Proxmox 9 cluster with VLAN on vmbr0..Stefan, I applied the patch info to the IPRoute2.pm file and was able to successfully migrate a VM as a test. I did see the following in the output during the migration: 2025-12-16 10:37:37 use dedicated network address for sending migration...
-
Ddbondarchuk replied to the thread Windows VM stuck on boot with CPU type set to host.Yes, I have been through that thread, and unfortunately, nothing helped. But today, to test, I created a new VM with CPU set to host, installed a new version of Windows on the VM disk, and it works fine. So the problem is really interesting :)
-
GGE_Admin replied to the thread [SOLVED] Super slow, timeout, and VM stuck while backing up, after updated to PVE 9.1.1 and PBS 4.0.20.Thanks Lukas for this useful suggestion!
-
LLKo replied to the thread [SOLVED] Super slow, timeout, and VM stuck while backing up, after updated to PVE 9.1.1 and PBS 4.0.20.I'm doing my testing in the off-hours anyway, 6.17.11-3-test-pve is up and running and we'll have a result in the morning. For all others: if the stalled backup crashes your VMs, please look into enabling fleecing for the scheduled backups...
