Latest activity
-
PPeterVerwulgen reacted to t.lamprecht's post in the thread Proxmox Datacenter Manager 1.0 (stable) with
Like.
We're very excited to present the first stable release of our new Proxmox Datacenter Manager! Proxmox Datacenter Manager is an open-source, centralized management solution to oversee and manage multiple, independent Proxmox-based environments... -
ggoller replied to the thread Invalid ARP responses cause network problems.Could you paste your /etc/network/interfaces file? Do you maybe have net.ipv4.conf.{all,eno0}.proxy_arp enabled? -
IIsThisThingOn replied to the thread ZFS storage is very full, we would like to increase the space but....Another great explanation of that topic: https://forums.truenas.com/t/understanding-openzfs-capacity/2444 It even has a picture of a 7 wide RAIDZ2 with 128k. Not exactly your 8 wide, but pretty close: See the two X sectors? That is 8k padding...
-
-
DDennigma replied to the thread Proxmox 9.1.2 HA migration issues when rebooting node..I have the same problem since i updated today, you need to set the manual maintenance mode before rebooting. for some reasons migrating with this works fine. when its stuck in the faulty state it helps to shutdown the vm (not in the proxmox...
-
RolandK replied to the thread single unencrypted file in encrypted repo - where does it belong to ?.ah, ok, that makes sense. thanks for explaining. i removed the atime safety check mark and on the next GC the file got removed. -
UdoB replied to the thread Was ist eigentlich der richtige Weg, einen Trunk in Proxmox zu verwenden ohne dedizierte vlan Konfiguration für VMs.Was der Standardweg ist, weiß ich nicht. Ich habe für mich entschieden, dass eine VM "von innen" nichts manipulieren können darf, daher bekommt keine VM Zugriff auf tagged trunks. Außerdem ist mir SDN "zu kompliziert" ;-) Stattdessen habe ich... -
MMadozu replied to the thread if reboot is triggered pve node goes away too fast before ha migration is finished.I am facing the same issue with PVE version 9.1.2 in a HA cluster whenever I want to shutdown or reboot a host for maintenance. Therefore I would like to share a workaround when the problem happens and a way to avoid the problem. Both worked fine...
-
shanreich replied to the thread Issue After Proxmox Update – VM Migration Fails for VLAN-Tagged Interfaces.It's currently not yet merged, it has only been created two hours ago, but the fix should be merged and packaged quite soon, considering the nature of the problem. -
Iinfrastructure@buzinesswa replied to the thread Issue After Proxmox Update – VM Migration Fails for VLAN-Tagged Interfaces.hi shanreich, Thanks but may i know how to apply this ? or do i have to reboot the node ?
-
UdoB reacted to IsThisThingOn's post in the thread ZFS storage is very full, we would like to increase the space but... with Like.
BTW, that calculator has an interesting note regarding the zfs list command you used: Maybe this is what screwed your tests? I honestly have no idea. Here is another, IMHO even better calculator. And if you scroll down all the way to the...
-
shanreich replied to the thread Issue After Proxmox Update – VM Migration Fails for VLAN-Tagged Interfaces.There's already a fix for this on the ML: https://lore.proxmox.com/pve-devel/20251216094329.36089-1-s.hanreich@proxmox.com/T/#u
-
DDennigma replied to the thread Auto Migration doesn't work when using "reboot" button in webgui.Yes it is set to migrate. The default at the moment leads to a shutdown of the vm. The migration is the behaviour I want to have. The node is TRYING to migrate the vm, but can't (error message in first post) and then it's stuck in this state...
-
AAdeon replied to the thread PBS 4.1.0 - no output in task status window.Same issue here. For me, it also only happens when using a reverse proxy (Traefik) to access PBS, everything works normal when accessing PBS via IP.
-
UdoB replied to the thread Auto Migration doesn't work when using "reboot" button in webgui.Please check if Datacenter --> Options --> HA Settings contains "Shutdown Policy: migrate"
-
RolandK posted the thread single unencrypted file in encrypted repo - where does it belong to ? in Proxmox Backup: Installation and configuration.i have made some weird observation, i cannot explain to myself i switched my repos to encrypted a while ago and all unencrypted backups have been purged and removed by garbage collection. in webui all backup snapshots show up encrypted. for...
-
IIsThisThingOn replied to the thread ZFS storage is very full, we would like to increase the space but....BTW, that calculator has an interesting note regarding the zfs list command you used: Maybe this is what screwed your tests? I honestly have no idea. Here is another, IMHO even better calculator. And if you scroll down all the way to the...
-
MMartin.B. replied to the thread Kann VM nicht (mehr) starten.Vielen Dank für Dein Unterstützung und Bemühungen. Ich werde mich im neuen Jahr weiter damit beschäftigen (müssen). Vielleicht auch direkt mit einem Experten zusammen. Allen hier schonmal schöne Feiertage und einen angenehmen Übergang ins neue...
-
Ss.meier77 posted the thread Was ist eigentlich der richtige Weg, einen Trunk in Proxmox zu verwenden ohne dedizierte vlan Konfiguration für VMs in Proxmox VE (Deutsch/German).Moin, ich habe einen Host, zu dem ein vlan-Trunk konfiguriert ist. Ich möchte in dem speziellen Fall den VM's die vlans nicht direkt mitgeben sondern das ganze entweder über die Linux vlan Konfiguration oder über eine Linux Brücke (vmbr) mit...
-
Iinformant posted the thread [SOLVED] Cluster mit ? und grau aber CPU RAM Anzeige in Übersicht funzt jedoch kein Graph in Proxmox VE (Deutsch/German).Hallo zusammen, nach einer Zeit kommt es bei mir immer wieder vor, dass nur der Cluster plötzlich ? bekommt und alles grau ist, er zeigt keinerlei Graphen mehr an. Aber CPU, RAM Live-Balken etc. in der Übersicht laufen und sind aktuell. An was...
-
JJohannes S replied to the thread Etesync, anybody? LXC, OCI, VM? Pitfalls?.I don't use it but did you try the install guide on https://www.etesync.com/user-guide/ or https://github.com/etesync/etesync-dav/wiki/Installing-EteSync-DAV-on-Linux ? I see no reason why it shouldn't work with your Debian lxc
