Latest activity
-
JJohannes S reacted to Dunuin's post in the thread Possible to change Proxmox default port now? with
Like.
Unless a upgrade changes those files you manipulate so your script doesn't work any longer. We already had similar things with the script that edits proxmox files to remove the "nag" popup. -
JJohannes S reacted to AllanM's post in the thread Possible to change Proxmox default port now? with Like.
I would suggest leaving the proxmox configuration alone, and rather than trying to "fix" something that isn't a problem, simply create a proxy that does what you want it to do. I use haproxy (on pfsense) to direct incoming host.domain requests...
-
JJohannes S reacted to LnxBil's post in the thread Possible to change Proxmox default port now? with Like.
Looks much easier and better maintainable than just using one iptables from above.
-
JJohannes S reacted to Dunuin's post in the thread Possible to change Proxmox default port now? with Like.
There is no "Proxmox". Proxmox VE uses 8006 and Proxmox Backup Server 8007. And you can run both in parallel bare metal on the same host. Wouldn't work if both webUIs would use the default port 443. That doesn't look like a reliable solution. I...
-
JJohannes S reacted to guletz's post in the thread Possible to change Proxmox default port now? with Like.
Corect! What you can do: 1. Use any decent VPN: - on PMX node(not so good), and expose 8006 only for VPN and for your LAN - or, better is to setup a VPN on your border router 2. Port Knocking - on PMX node - better, on your border router 3...
-
JJohannes S reacted to LnxBil's post in the thread Possible to change Proxmox default port now? with Like.
Good points @guletz, but you forgot 0. Use a static IP as a client and allow only that IP through your PVE firewall.
-
JJohannes S reacted to LnxBil's post in the thread Possible to change Proxmox default port now? with Like.
Then you need another iptables rule.
-
JJohannes S reacted to Falk R.'s post in the thread CEPH Probleme : 2 OSD(s) have spurious read errors with Like.
Am besten baust du das Ceph zurück und nutzt lieber ZFS Replication. Für Ceph brauchst du schnelles Netzwerk und empfohlene 4 Disks pro Node, oder in der Spielumgebung wo du weniger als 50% Befüllung hast wenigstens 2 Disks pro Node. Mit...
-
JJohannes S reacted to Falk R.'s post in the thread [SOLVED] Lan Zugriff bricht einfach ab with Like.
Warum hast du Ceph installiert, wenn du eh nur einen Rechner hast?
-
Ssfxdana replied to the thread Issues with Intel Arc B50 Pro vGPU SR-IOV (vfio_pci).Hello, Been a while but didn't have time to continue testing. But finally found some time, and now I am a step further. It seems that the issues I had were related to IOMMU using the same group for all devices. Which is a big no no for SR-IOV...
-
Falk R. replied to the thread Kann VM nicht (mehr) starten.OK, für solche Testszenarien ist das ein valider Grund. Du siehst nur ein Gerät/Pfad = sdb, das deutet darauf hin, dass entweder nicht mehr Targets eingeloggt sind oder die LUN nicht auf alle Pfade gemappt ist. Die Idee mit einem erfahrenen... -
Bbl1mp replied to the thread Unraid als VM verliert unregelmäßig seinen USB Boot Stick Passthrough.Hi Snupydoo, Hast du den Stick per device identifier durchgereicht? Das sollte eigentlich am zuverlässigsten sein. Ggf. ist der USB-stick faulty? Je nach Hersteller, kann die Qualität des Sticks manchmal auch sehr deutlich schwanken. BG, Lucas
-
LLongQT-sea reacted to cracked's post in the thread iGPU passthrough on Proxmox VE 9.1.1 – VM freezes on boot with Like.
root@ubuntu:~# lspci -nnk -s 00:02.0 00:02.0 VGA compatible controller [0300]: Intel Corporation Alder Lake-N [UHD Graphics] [8086:46d1] Subsystem: Device [0301:02f3] Kernel driver in use: i915 Kernel modules: i915, xe...
-
IIsThisThingOn replied to the thread NAS UGreen DXP4800 Plus.Verstehe nicht ganz deine Frage, noch dein Setup. Ich kann nur sagen, irgendeine Form von Disk, in Form einer Datei (zum Beispiel QCOW2 oder VDI) zu verwenden, und diese Datei/Disk dann auf ein NFS share zu legen, und dieser NFS share hat dann...
-
shanreich replied to the thread VLAN and SDN struggles.Can you post the network configuration of your host, as well as the generated network configuration files? ip a ip r cat /etc/network/interfaces cat /etc/network/interfaces.d/sdn cat /etc/pve/sdn/.running-config The configuration of one of the... -
Ccracked replied to the thread iGPU passthrough on Proxmox VE 9.1.1 – VM freezes on boot.root@ubuntu:~# lspci -nnk -s 00:02.0 00:02.0 VGA compatible controller [0300]: Intel Corporation Alder Lake-N [UHD Graphics] [8086:46d1] Subsystem: Device [0301:02f3] Kernel driver in use: i915 Kernel modules: i915, xe...
-
I@Falk R., @Bu66as Das kann ich nur bestätigen. Unter VMware gibt es kaum Unterschiede in der Disk-Performance zwischen NFS und iSCSI.
-
DDennigma posted the thread Auto Migration doesn't work when using "reboot" button in webgui in Proxmox VE: Networking and Firewall.So today I updated all 3 nodes in my cluster, which is using HA features. Until today I was able to use the reboot button to just reboot a node, the HA would automatically migrate the VMs to another node. But after the update today it doesn't...
-
Pptselios replied to the thread VLAN and SDN struggles.Adding an IP is definitely not what I want. Also, it doesn't explain why this works just for some of the VNets. But I will delete at least one zone and see if this makes any difference.
-
JDas ist ja schon mal OK. Siehst du denn weitere Disks? Am besten mal mit lsblk abfragen. Notfalls mit multipath - a /dev/sdX den zusätzlichen Pfad als Multipath Device hinzufügen. Snapshots werden eh überbewertet. Ich habe viele Kunden mit ihren...