Latest activity
-
JJohannes S reacted to aaron's post in the thread Windows Guest memory utilization problem on PVE 9.0.x with
Like.
Only once you get more detailed infos back via `info balloon` in the Monitor menu, can Proxmox VE itself show the inside view of the VM. So if the BalloonService is up and running, the Ballooning Device enabled, things should be good. Except... -
JJohannes S reacted to aaron's post in the thread Windows Guest memory utilization problem on PVE 9.0.x with Like.
Those will not report detailed memory usage. See https://pve.proxmox.com/wiki/Upgrade_from_8_to_9#VM_Memory_Consumption_Shown_is_Higher The old Win 2008 machine does not report back detailed memory info. What you need is to get the guest to...
-
Sstanthewizzard2025 replied to the thread [SOLVED] Super slow, timeout, and VM stuck while backing up, after updated to PVE 9.1.1 and PBS 4.0.20.Thank you @Chris I'll stay on the previous kernel that works for my case (but as I like to livre dangerously I'll try it during the break)
-
LLongQT-sea replied to the thread iGPU passthrough on Proxmox VE 9.1.1 – VM freezes on boot.It looks like the kernel in the Ubuntu VM created by the Proxmox VE scripts is a minimal kernel, which does not include the Intel iGPU drivers (i915 or xe). You need to reinstall the full generic Linux kernel: sudo apt update sudo apt install...
-
Ccracked replied to the thread iGPU passthrough on Proxmox VE 9.1.1 – VM freezes on boot.@ LongQT-sea root@ubuntu:~# lspci -nnk 00:01.2 USB controller [0c03]: Intel Corporation 82371SB PIIX3 USB [Natoma/Triton II] [8086:7020] (rev 01) Subsystem: Red Hat, Inc. QEMU Virtual Machine [1af4:1100] Kernel driver in use...
-
Sstanthewizzard2025 replied to the thread [SOLVED] Super slow, timeout, and VM stuck while backing up, after updated to PVE 9.1.1 and PBS 4.0.20.back on this thread proxmox-kernel-6.17.4-1-pve-signed correct the bad behavior ? safe to update ? Thanks for help
-
Ddrnicolas replied to the thread Kann eine VM nicht löschen .....Vielen Dank. Das scheint funktioniert zu haben
-
PPmUserZFS replied to the thread ceph 20.2?.4 weeks later, any updates?
-
DDeBuurman replied to the thread Monitoring cluster resources.Paessler is working on it : Exciting news! Your idea is now in progress! Our team has started working on bringing this feature/improvement to life. We're diligently developing and testing, and we'll keep you updated on our progress. We're...
-
shanreich replied to the thread Bonded ethernet uplinks broken in pve-common 9.1.1.submitted an initial patch, thanks for the report: https://lore.proxmox.com/pve-devel/20251216094329.36089-1-s.hanreich@proxmox.com/T/#u -
shanreich replied to the thread VLAN and SDN struggles.Several things come to mind after looking at the configuration: You have multiple zones for the same bridge, it is sufficient to create one zone per bridge. Is the bridge VLAN-aware? You configured a gateway for the subnets - but that settings...
-
Pproxman4 replied to the thread [SOLVED] pcipasshrough not working after upgrade to proxmox 9.Thanks @leesteken . I reduced the RAM and............. It works ! I'll definitely reduce ARC usage as server has 256GiB RAM and can handle all vm smoothly. Thank you very much have an excellent day !
-
Rrgreen83 replied to the thread ProxMox 9.1.2 on MS-01 cannot make i226-V come up.There is a lot of issues with i226-V and latest versions of proxmox, but not limited to proxmox, it seems to be affecting many linux and freebsd systems. My solution was to update the nic firmware, see here for many others doing the same...
-
Kkfx replied to the thread Severe system freeze with NFS on Proxmox 9 running kernel 6.14.8-2-pve when mounting NFS shares.Do you backup this VM using the "Snapshot" mode (to a PBS server, for info) ? We deactivated the backup and the VM is up since 3 days which is a new record. Maybe it has something to do with the freeze order send to the guest agent ?
-
LLKo replied to the thread [SOLVED] Super slow, timeout, and VM stuck while backing up, after updated to PVE 9.1.1 and PBS 4.0.20.I was frolicking too soon: one backup did in fact stall, but recovered (sort of) after two hours: 242: 2025-12-16 04:28:22 INFO: using fast incremental mode (dirty-bitmap), 908.0 MiB dirty of 50.0 GiB total 242: 2025-12-16 04:28:25 INFO: 64%...
-
HHyadum replied to the thread ProxMox 9.1.2 on MS-01 cannot make i226-V come up.No, there have been no replies with any possible solution so far. I have tried troublshooting from the documentation and using ChatGPT, but the issue remains the same. I cannot change the speed or autonegotiation inside ProxMox and link is down...
-
MMelone145 replied to the thread QEMU VM startup timeout.Sorry, but I can't really see where I can change something to increase the timeout.
-
Rrandymartin replied to the thread Proxmox 9.1.2 HA migration issues when rebooting node..No update available yet I am afraid, i already have this update:
-
-
LLongQT-sea replied to the thread iGPU passthrough on Proxmox VE 9.1.1 – VM freezes on boot.lspci -nnk -s 00:02.0 inside the VM, it has to look like this to indicate that it's working.: Kernel driver in use: i915 00:02.0 VGA compatible controller [0300]: Intel Corporation CoffeeLake-H GT2 [UHD Graphics 630] [8086:3e9b] (rev 02)...
-
ggoller replied to the thread OpenFabric: Could not find two T0 routers log spam after migration? (And VM access question).Hi! Hmm this should not happen. Did you get any error in the console or the syslog? Was the "fabricd" entry just set to "no" in the /etc/frr/daemons file? DId you perhaps have an older version of frr? Or did you update frr after applying...
