Latest activity
-
Falk R. replied to the thread Proxmox mit ThinkSystem SR650.Hi, es sind immer 8 Slots nutzbar. Wenn du den Server aufmachst, gehen 2 Kabel zur Backplane und da gehen je 4 SAS Links über ein Kabel. -
FI just now saw your message. Go to /etc/pve/nodes/pve/lxc Open the file for your LXC and add the lines: lxc.cgroup2.devices.allow: c 226:0 rwm lxc.cgroup2.devices.allow: c 226:128 rwm lxc.cgroup2.devices.allow: c 29:0 rwm lxc.mount.entry...
-
Falk R. replied to the thread FiberChannel Controller.Die beiden Chips sollten noch funktionieren, habe aber so alte Hardware schon länger nicht mehr in der Hand gehabt. Alte QLE24XX habe ich garantiert auch noch einige rumliegen, aber zum testen habe ich im Moment gerade keine Zeit.
-
PPsilospiral replied to the thread booting from proxmox boot failed.gpvazquez, I stumbled across this same issue while experimenting with SD card backup and restore procedures with my Dell T620. I was using dd to backup working SD cards and then restoring to a different SD to document my disaster recovery...
-
Ddavidmei replied to the thread [SOLVED] Lan Zugriff bricht einfach ab.Hi, also Updates Proxmox alle gemacht. Bios ist neu, Batterie auch. Dennoch habe ich das Problem, also das habe ich alles vorher schon gemacht :O Wie geht ein Memtest? Gibt es bei Proxmox evtl. einen Log, der mitschreibt wenn Netzwerk abbricht?
-
JYou can run chattr +i /mnt/unaspro while unmounted to prevent this from happening again. See here: https://serverfault.com/questions/570255/prevent-the-possiblity-of-writing-data-to-an-unmounted-mount-point-directory
-
Ooester replied to the thread What task is this and what does this error mean?.It’s a local disk, nvme, 4Tb. These only occur during the data store sync from nvme1->pbsbackup(nfs share on my NAS) the sync process finishes without error, it was only by chance I saw these when I looked at the individual tasks.
-
news replied to the thread [SOLVED] Lan Zugriff bricht einfach ab.Noch eine Sache: lass bitte noch alle Proxmox VE Updates durchlaufen. -
news replied to the thread [SOLVED] Lan Zugriff bricht einfach ab.Ok, danke. Ich habe das Mainboard gefunden: # https://www.asus.com/de/motherboards-components/motherboards/prime/prime-a320m-k/techspec/ LAN Realtek® RTL8111H läuft bei mir ohne Probleme. Ich dachte erste an ein INTEL e1000 chipsatz. Vor Jahren...
-
OYou can run chattr +i /mnt/unaspro while unmounted to prevent this from happening again. See here: https://serverfault.com/questions/570255/prevent-the-possiblity-of-writing-data-to-an-unmounted-mount-point-directory
-
PFWIW, having a seperate host menu item called Sensors would be a massive plus. I have 2 x Proxmox host and both have IPMI. Being able to go into that menu and see stats for IPMI and SMART data for disks would be fantastic!
-
Ddavidmei replied to the thread [SOLVED] Lan Zugriff bricht einfach ab.Natürlich sorry. Hardware: Mainboard: Prime A320 MK Prozessor: Ryzen 5 1600 RAM: 2x 8 GB 2400 MHZ Festplatte: 1 TB HDD Installiert wurde Proxmon 9.1-1. Community also ohne Lizenz. Proxmox...
-
news replied to the thread [SOLVED] Lan Zugriff bricht einfach ab.Was bedeute das genau? Mag OP beschreiben, welche Datei verwendet wurde und was dort im Download stand? Evlt. ist auch irgendwo die Hardware beschrieben und wir bekommen eine Idee, ob es ein Hardwareproblem sein könnte. Vielleicht ist die...
-
Nnautilus7 reacted to jaminmc's post in the thread Opt-in Linux 6.17 Kernel for Proxmox VE 9 available on test & no-subscription with
Like.
That was FAST! and the patch that Fabian Grünbichler came up with was only one line change, so I guess it is more efficient :) There is a 6.17.2-2-pve in the Proxmox Testing repo. I installed it and Podman is humming along now! Now I no longer... -
DHallo Zusammen, ich habe einen Proxmox nun installiert. Leider habe ich das Problem, dass der Netzwerkzugriff nach ein paar Stunden wie aus dem nichts abbricht. Mainboard / CPU etc. läuft noch und wenn ich einenBildschirm ranhänge zeigt die...
-
11ONE replied to the thread [SOLVED] Problem migrating VMs in a Proxmox 9 cluster with VLAN on vmbr0..In my home lab, I renamed the network interfaces using: pve-network-interface-pinning generate --prefix eth After that, I deleted the originally generated files from /usr/local/lib/systemd/network/ (in my case the file was named, for example...
-
Aalexskysilk replied to the thread Confused on bonds, interfaces...this doesn't work like you think. In effect, this creates a loop which will either have one interface blocked by STP, or the whole switch would be shut down. In other words, this is a poor substitute for an active/passive bond. That is a more...
-
GGlupikocz replied to the thread GMKTEC K12 | Ryzen 7 H 255 | Problem with IGPU.You would have to show the entire configuration, what exactly you changed and what you added. Generally, Windows itself will work without any problems, the only issue is with restarting. The question is also why you are using AMDGopDriver.rom...
-
-
JHi, I didn't see this anywhere in docs or search. When I set up the s3 datastore for s3 it asks for local cache. I tried using my OS disk but it started using too much space. I'm setting it up again to use a new folder in my ZFS pool. I was...
-
Jjuju01 replied to the thread Cleaning up previous backups.That helped. I unmounted the network share, restarted the vm, then used the gdu tool to drill down and delete everything under /mnt (16 GB of data found there ), then remounted the network share. All good. thx to you guys. @Impact @Onslow
