Latest activity
-
Ccelemine1gig replied to the thread Problems with PCIe passthrough with two identical devices.My answer was not directed at any one person in particular. So, it is completely fair to say, that you cannot do this. Main point is: Someone will have to try it. My suggestion is far from being proven. Only way however, in order to find out...
-
66equj5 reacted to maxim.webster's post in the thread Is there a way to backup the PVE Host to the Proxmox Backup Server (PBS)? with
Like.
Here's the script that I am currently using, it focusses on backing up the host configuration, not the payload (VMs, CT, etc.). #!/bin/bash if [ -f /etc/pve/local/pve-backup.env ] ; then source /etc/pve/local/pve-backup.env else... -
Ggasherbrum replied to the thread vm migration error on node reboot.this just began occurring with my setup on 9.1.2
-
Pphdb44 posted the thread SSD NVMe Suddenly no more recognized in Proxmox VE: Installation and configuration.Hello, I'm encountering a rather unusual problem. My setup : Ryzen 7 5700X, 64GB RAM, a 4TB Samsung 990 Pro NVMe SSD, two 120GB SSDs (one for ISOs and one for Snap), two 3TB HDDs (for backups), and a 650W power supply. My VMs : 45 VMs, 9 of...
-
OOnslow replied to the thread Cleaning up previous backups.@juju01 umount /mnt/unaspro and check in /mnt whether your old backups are there.
-
SSchorschSK replied to the thread High VM-EXIT and Host CPU usage on idle with Windows Server 2025.Ok this sounds promising. Did you try out 6.18 or did you disable nesting and enable avic? Intel or AMD cpu? I tried enabling avic but might have missed the part with disabling nesting so gonna try it again when time allows.
-
WWolfLink115 replied to the thread Host system crash after VM power off/Reboot.I haven't tried using a Linux VM instead of a Windows VM, though that would probs be a good thing to try. The issue with that is I don't exactly have enough space to do that at the moment, but I will test that when I get the ability to. I know...
-
Sspetrillo replied to the thread Help with Proxmox Trunk Port Setup – Letting OPNsense Handle VLANs,DHCP etc.I have 3 NICs on my server, 2 10g NICs and the 1g onboard NIC. The onboard NIC will be dedicated to OPNsense WAN directly. The two 10g NICs will be vlan aware and will handle all the vlans in my setup, as well as provide mgmt of the PVE server. I...
-
Rredjohn posted the thread Proxmox 9 - Bridge - IPv6 - LXC Container problem! in Proxmox VE: Networking and Firewall.Hello everyone, I moved my server to new hardware. With new IPv6 IP's. Now my Gateway looks like this: fe80:0000:0000:0000:0000:0000:0000:0001 My Proxmox Host can use IPv6 and I can ping outside, fine! :-) But my LXC Container can not use...
-
JJack_Rookie posted the thread [SOLVED] TASK ERROR: no such logical volume XXX/YYY in Proxmox VE (Deutsch/German).Haben den o.g. Fehler beim Löschen eines LXC. Ursache war eine defekte Platte. Lösung habe ich in diesem Beitrag gefunden. Kann eine VM nicht löschen... (Die Überschrift zum Beitrag ist irreführend, daher diesen hier mit entsprechender...
-
IIWIOS replied to the thread Zip file corrupted when I try to download theme from Proxmox Server.it's possible, a corrupted backup be at the origin of the problem ?
-
JJack_Rookie replied to the thread Kann eine VM nicht löschen .....Ich hatte einen vergleichbaren Fehler, nachdem eine Platte abgeraucht ist. TASK ERROR: no such logical volume XXX/YYY Die Lösung lag tatsächlich darin, die "storage.cfg" anzupassen und den fehlenden Eintrag zu entfernen. nano...
-
Nneobiker replied to the thread ZFS SSD Migration Consumer zu Server SSD.Also: Ich habe die VMs jetzt auf den neuen SSDs per PBS auf einen neuen PVE9 gezogen, auf einem Ersatz-Rechner. Da laufen die erstmal produktiv. Den alten Server (PVE8) habe ich mittels Proxmox ISO im Debugmodus gebootet: CTRL-D bringt einen...
-
JEine Möglichkeit wäre, die Referenz zu dieser Platte zuerst manuell aus der Konfigurationsdatei zu entfernen bzw. Sie auskommentieren nano /etc/pve/qemu-server/902.conf
-
RRobert.H reacted to RoCE-geek's post in the thread High VM-EXIT and Host CPU usage on idle with Windows Server 2025 with Like.
And here is the root of "misunderstanding". Most of the contributors here are looking for the 24H2 side-effects mitigation, simply because a 3x increase of idle load is hardly acceptable for us, and we do not want to resign ourselves to the fact...
-
Llarsen replied to the thread Manually test mail filter rules.It is perfectly viable for PMG to do this.
-
Stoiko Ivanov replied to the thread Plugging in or unplugging the network cable will cause the PVE system to completely lose network connectivity..Please keep posts in this forum in English - you have a better chance of getting an answer from more people. Thanks! -
Mmocanub replied to the thread PVE9: Coral Driver install script.Doesn't work for me. Tested on 6.17.2-2-pve kernel:
-
DDrthrax74 replied to the thread Proxmox VE Trainings.404 Page not found
-
Ppatchrick84 replied to the thread Problems with PCIe passthrough with two identical devices.I'm happy to try just about anything (especially while still in the return period for the UGreen ), but after looking at your kernel quirk and firmware suggestions I decided they were over my head without a step by step guide.