Latest activity
-
LLKo replied to the thread [SOLVED] Super slow, timeout, and VM stuck while backing up, after updated to PVE 9.1.1 and PBS 4.0.20.tbf, it shouldn't be able to trigger a TCP rcv_wnd collapse like that. That said, I did not see any calls in strace that would indicate an application side problem/misuse of syscalls.
-
HHeizungsbauer replied to the thread [SOLVED] Kein Zugriff - DNS Problem?.Theoretisch ja ich dachte das evtl. aus mir nicht verständlichen Gründen eine Block Liste meine IP-Anfrage evtl. Ins Nirvana weiterleitet und ich deshalb keinen Zugriff mehr bekommen habe Hoffe ich habe dich richtig verstanden und hab mir das...
-
SSteveITS replied to the thread SDN broken after using pve-network-interface-pinning tool.Hmm, well all nodes had no gateway on reboot until I moved the management VLAN from nic0 to vmbr0. I did not reboot many times, but after that I saw 100% success with one reboot on each server. Worst case we can still connect with BMC/IPMI...
-
fiona replied to the thread Ceph repository changed.There is no main here: http://download.proxmox.com/debian/ceph-reef/dists/bookworm/ If you mirror the Release file from there you also need to mirror the correct component(s). -
Pproxman4 posted the thread [SOLVED] pcipasshrough not working after upgrade to proxmox 9 in Proxmox VE: Installation and configuration.Hi folks. Hope you're doing well. I got a weird issue. I got 2 proxmox prod-pi and pra-pi . Each one got a LSI SAS3008 Broadcaom used as pcipassthrough by a truenas vm. 04:00.0 Serial Attached SCSI controller [0107]: Broadcom / LSI SAS3008...
-
SSteveITS replied to the thread How to fail a looping HA VM migration?.For future reference, probably better/easier to enable maintenance mode: ha-manager crm-command node-maintenance enable pve1 (wait, then update+reboot) ha-manager crm-command node-maintenance disable pve1
-
aaron replied to the thread Windows Guest memory utilization problem on PVE 9.0.x.Only once you get more detailed infos back via `info balloon` in the Monitor menu, can Proxmox VE itself show the inside view of the VM. So if the BalloonService is up and running, the Ballooning Device enabled, things should be good. Except... -
MMarceldrzal replied to the thread Linux Rechner weiß nicht was das ist?.Schon ne Weile her Denke mal ich
-
TTErxleben replied to the thread [SOLVED] Kein Zugriff - DNS Problem?.1) Der Anzeige von FBen kann man überhaupt nicht trauen. 2) Klingt nach dem berüchtigten e1000-Bug. Dsbzgl. findest du einen ganzen Sack von Beiträgen.
-
SSteveITS replied to the thread Proxmox Cluster.No, because it's off. HA has a bit of a delay to be sure the node is really offline and not a temporary communication failure, so it isn't ever running twice. I don't know if that timeout can be adjusted. HA policy can be configured to...
-
Sstuartthebruce replied to the thread [SOLVED] Super slow, timeout, and VM stuck while backing up, after updated to PVE 9.1.1 and PBS 4.0.20.Has the hypothesis been tested that this is not a kernel bug, but rather a problem in the Proxmox Rust data transfer application that has been triggered by a change in the kernel? FWIW, I also have been unable to hang PVE to PBS server network...
-
Mmeyergru replied to the thread ZFS storage is very full, we would like to increase the space but....Being a german, I know that german saying... As you saw, the actual real-world results with a volblocksize of 128k do not show what the theory says. On a side note, I have a Proxmox Backup Server VM with a 2TByte data disk on the same raidz2...
-
SSteveITS replied to the thread Windows Guest memory utilization problem on PVE 9.0.x.Generally a hypervisor sees (simplified) the max memory ever used by the VM because it was allocated there. The VM can free memory by closing programs but that doesn't change the host's perspective because it was already allocated to the VM...
-
shanreich replied to the thread SDN broken after using pve-network-interface-pinning tool.I think it might be related to the change to a vlan-aware bridge, as that creates the VLAN on top of the bridge interface, instead of the physical interface. You have to be careful, since if this is the bug I linked (which I highly suspect). Then... -
Ff4242 replied to the thread What Permissions are needed on the PVE/PBS-Remotes for a Datacenter Manager User?.Hi, I think there is something wrong with the PDM security model. Instead of using a generic token with full permission on PVE side, PDM should forward the user authentication to PVE (retreive some kind of temporary token with user's...
-
Ooester replied to the thread Why does pveproxy still think I have a second node?.Thanks, yes this was the procedure I followed, and I did restart these process, and rebooted as well.
-
bbgeek17 replied to the thread migration plan from vsan cluster to proxmox.Hi @Xavier Droniou , can you provide exact commands with subsequent output that you executed? As well as your storage configuration: cat /etc/pve/storage.cfg To answer your question: Yes, you can can import file from locally mounted path... -
SSteveITS replied to the thread SDN broken after using pve-network-interface-pinning tool.Hmm, sounds very possible, though it's been fine for [edit: 7] months before the pinning. Maybe pinning changes the timing like the bond speculation in the report? I didn't pull logs or anything, since, like they report, reapplying the network...
-
cheiss reacted to t.lamprecht's post in the thread Proxmox Datacenter Manager 1.0 (stable) with
Like.
No, we do not provide any such scripts for PVE either and strongly recommend against installing any third party software, especially without carefully vetting it. See the FAQ for how to get rid of these notices the legitimate way... -
Ppatrick- replied to the thread Job ID wont show up in notification rules.Amazing! Thank you so much for helping to fix this! You're right, it was indeed a push sync job that I was trying to notify on. This fix will be a big help in sync monitoring and alerting! Thanks again