I believe I have solved this, although I cannot exactly pinpoint the issue.
I backed everything up to PBS, then changed my pool from 14x2TB in RAID10 to 4x2TB (LXCPOOL) and 10x2TB (VMPOOL) in RAID 10.
I had an an underperforming SSD, so I...
You can build a custom-view without the notification information but to be honest, Proxmox should include this in every view by default just to encourage people to buy a subscription!
No, we do not provide any such scripts for PVE either and strongly recommend against installing any third party software, especially without carefully vetting it.
See the FAQ for how to get rid of these notices the legitimate way...
I believe I have solved this, although I cannot exactly pinpoint the issue.
I backed everything up to PBS, then changed my pool from 14x2TB in RAID10 to 4x2TB (LXCPOOL) and 10x2TB (VMPOOL) in RAID 10.
I had an an underperforming SSD, so I...
Hi,
I'm trying to get a disclaimer text going for URLs that do not match sender e-mail domain.
I've added the header:
add_header all X-SA-URI-Domains _URIDOMAINS_
In my custom.cf. On a --lint action it detects it successfully...
@dcsapak I think I can put hands on an B60 and the related hardware for lab to try it out. What's the closest in instructions you can recommend to set it up.
I am thinking about selfhosted AI and encoding in dedicated VMs.
Restarting PVE restores the network connection, but testing by unplugging and replugging the network cable still results in PVE losing network connectivity. ip:8006 Unable to connect
Excluding the nested PVE from KSM didn't seem to make a difference
as its keeps on panicking eventually, even with no big workloads running.
I'll try disabling ballooning next (keeping KSM disabled too)
I'm having the same problem as you guys, but when I change the sqash-option on my synology-share to "map all users to admin" then the host loses the permission to access the share and the LXC-Container still can't access.
With "no mapping" the...
Hi!
The versions of the node seem a bit out of date, pve-manager 9.0.5 is from mid-August. Could you try upgrading the nodes to see if this is fixed in a more current version?
The HA groups should have been migrated with the upgrade from PVE 8...
Oh, sorry for missunderstood
This is the log:
[2025-12-15T14:38:23.677Z INFO proxmox_restore_daemon::proxmox_restore_daemon::watchdog] Inhibit added: 1
I/O error, dev vda, sector 49346584 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0...
@Falk R.,
gute Zusammenfassung ;)
@sala82 Ergänzend dazu: Der Importer kopiert/synct die Daten vor (oder während) dem Start, was IO-Last erzeugt und Zeit kostet. Die NFS-Methode mountet die existierende Disk sofort (Mapping). Du hast also keine...
PVE Version: 9.1.2
Device: NUC15
Network Card: Intel i226V (igc)
Symptoms: After recently replacing the network switch and frequently plugging and unplugging network cables, I found that PVE completely loses network connectivity after plugging...
Forwarding to the recipient(s) based on the subject or any other conditions is more a function of the mail server than the mail gateway.
The gateway's job is to validate the message and forward it to the mail server for delivery to the recipient...
for live migration with passed through devices, you must load a capable driver on the vf, in case of mellanox i think the driver was mlx5_vfio_pci
then you need to adapt the config to have 'driver=keep' in the config in the 'hostpci' part like...
No, we do not provide any such scripts for PVE either and strongly recommend against installing any third party software, especially without carefully vetting it.
See the FAQ for how to get rid of these notices the legitimate way...