Latest activity
-
HHomelabPenguin posted the thread LXC nesting + lxc command access in Proxmox VE: Installation and configuration.Hi, I'm starting to setup a LXC to run the Forgejo action runner and have a few questions. I haven't used LXC nesting at all and couldn't find the answers searching. I then looked in the Proxmox docs and found that nesting is enabled by default...
-
Ggno replied to the thread How can I access data of one LXC container from an other container?.I think bind mounts are used to access data from external devices that are mounted on the pve host. I want to acces data that is stored on an other container's ZFS subvolume. See my first post
-
TLast two rounds of the VM image backup have resulted in an error, backup of the image is successful I can restore the image or extract a single file from the VM. The error message is using fast incremental mode (dirty-bitmap), 3.0 GiB dirty of...
-
DFor now, comment out your -args line like so: # args: -cpu 'host,+kvm_pv_unhalt,+kvm_pv_eoi,hv_vendor_id=NV43FIX,kvm=off',-hypervisor,hv_vapic,hv_stimer,+invtsc and just paste args: -cpu host,-hypervisor,kvm=off under that line for now, you can...
-
DDubyah reacted to powersupport's post in the thread Proxmox Backup Server (PBS) 4.1.0 causing S3 InternalError (500) during Garbage Collection (GC) with
Like.
This problem started after upgrading Proxmox Backup Server to version 4.1.0. While backups and verification jobs continue to run successfully, the Garbage Collection (GC) task fails during the “sweep unused chunks” phase due to an error returned... -
Gglockmane replied to the thread [SOLVED] Anti-Cheat KVM Settings.The "dmidecode -s [...]" commands give me generic answer e.g.: "dmidecode -s system-product-name" gives Output "System Product Name"..
-
Ccarles89 reacted to IsThisThingOn's post in the thread ZFS storage is very full, we would like to increase the space but... with Like.
Sorry, I misunderstood. In that case you can leave it. Sure. So Proxmox uses the good default of 16k volblocksize. That means that all your VMs ZFS raw disks, are offered 16k blocks. Now lets look how ZFS provides 16k blocks. You have RAIDZ1...
-
Ccarles89 reacted to IsThisThingOn's post in the thread ZFS storage is very full, we would like to increase the space but... with Like.
I would recommend you to do - Backup the VMs - Backup your Proxmox settings - destroy, reinstall Proxmox - use mirrors! - reimport the VMs I would not use 5 drives as a RAIDZ1. With the default of 16k volblocksize you only get 66% and not your...
-
Mmeyergru replied to the thread ZFS storage is very full, we would like to increase the space but....So I conducted my experiment: My raidz2 zpool is 8x18 TByte at a volblocksize of 128k. I added a virtio 1GByte raw disk to one of my VMs. From inside the VM, I tried these commands (/dev/urandom is being used to ensure none of the data is...
-
SSteveITS replied to the thread SDN broken after using pve-network-interface-pinning tool.With the benefit of sleep, I moved the management VLAN "raw device" from nic0 to vmbr0 to solve the missing gateway issue. It is apparently not necessary for local traffic, e.g. a corosync link VLAN is still functional on nic* on all servers...
-
Gglockmane replied to the thread Minisforum UM790: USB4/Thunderbolt Passthrough.Did you do it like that? apt install boltctl apt install polkitd apt install pkexec boltctl list -a boltctl enroll <UUID> lspci -nn | grep -e 'NVIDIA'
-
CCAAD replied to the thread MS-A2 Minisforum (AMD Ryzen™ 9 9955HX + Radeon™ 610M) – The “I Finally Stopped Crying” Zero-Artifact iGPU Passthrough Thread.Well theres some other reasons I need a stronger GPU but this was good enough for me to evaluate the 610M. @ozumo thank you very much for all your assist. THe suggestions here are indeed insightful. @futiless Thank you as well for posting your...
-
DHi, Not sure if you already figured this out, but I'll reply anyway as I just came across this myself and fixed it. Choose the second option on the TALOS boot screen "Reboot into firmware interface". From there, go to Device manager > Secure...
-
KKiri11 replied to the thread vm disk type - can i change it?.Boot the machine with drive attached back as virtio0 (or boot in Live_CD). Run Regedit - go to \HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\vioscsi (if vioscsi folder is missing then attach temporary to VM a new disk as SCSI, then you...
-
-
Ggseeley reacted to Dieter Toews's post in the thread [SOLVED] Proxmox installer not seeing my sas drives with Like.
Drive Size no longer reports 0!!!!! after the failure of unbuntu17.x and while waiting for windoz to download i started reviewing the output of smartctl and saw this... Logical block size: 520 bytes that fired a neuron that had been...
-
Ttorroe replied to the thread Proxmox Backup Server (PBS) 4.1.0 causing S3 InternalError (500) during Garbage Collection (GC).Thank you very much for the fast and incredibly precise diagnosis! The confirmed information about the change in the GC logic in PBS 4.1.0 is extremely valuable. I have already forwarded the API incompatibility diagnosis (specifically the issue...
-
DDerekG replied to the thread [SOLVED] kernel: landlock - Error on VM boot - assistance required.Sorry it's taken so long, it's not easy to take the TrueNAS down for diagnosis here. I think there has been an update to kernel 6.17.2-2 since my last update. And this is the log from VM boot: Dec 14 17:12:49 pve-5 pvestatd[2344]: status...
-
Rricotta posted the thread offline offsite backup via zfs in Proxmox Backup: Installation and configuration.Hello, I couldn't find any answer that would satisfy me, so had to create this thread. Before I can afford an offsite server, I'd like to implement a poor man's offsite backup by copying data to separate HDDs and dropping those to family...
-
Ttechsolo12 reacted to lucius_the's post in the thread Secure Boot – Microsoft UEFI CA 2023 Certificate Not Included in EFI Disk with Like.
Well, I'll just post another update since I already spent many hours on this. Might help maybe. The procedure (to get windows fullly up to date and have Event ID 1801 cleared) there are actually many steps, both on the UEFI side and inside...
-
DDerekG replied to the thread Minisforum UM790: USB4/Thunderbolt Passthrough.How did you get thunderolt to authorize, whatever 'bolt' command I use, returns nothing, and I never get the device file /sys/bus/thunderbolt/devices populated. Can you post you modules and blacklists.?
