Latest activity
-
From all of my own experience: yes! How large the effect is depends on your actual use case, of course. Writing (and reading) the actual data may be (nearly) as slow as before - but the meta data can be read and written much, much faster than... -
gurubert reacted to fweber's post in the thread 40 node prod cluster restarts when joining a new node or removing. with
Like.
Hi, from a quick look, the "Retransmit" messages may be a symptom of network stability issues (e.g. lost packets, increased latency etc) that are more likely to occur if corosync shares a physical network with other traffic types -- I'd expect... -
Ssharbich posted the thread [TUTORIAL] Expanding zpool mirror with 2 additional NVMe hard drives in Proxmox VE: Installation and configuration.Hello everyone, i'd like to expand my existing Zpool Mirror-0 to a Mirror-1 by adding two more NVMe drives. What's the best way to do this? Here's my Zpool status: pool: rpool state: ONLINE status: Some supported and requested features are not...
-
UdoB replied to the thread ZFS spesial vdev and VM.From all of my own experience: yes! How large the effect is depends on your actual use case, of course. Writing (and reading) the actual data may be (nearly) as slow as before - but the meta data can be read and written much, much faster than... -
Nns33 replied to the thread Frr update to 10.4.1-1 broke external routing?.All working now!! Even with 10.4.1. We noticed we had more wrong with our physical network. In our own troubleshooting, we noticed random subnets weren't getting routed locally between each other, but others would. I ended up tossing the idea of...
-
SSteveITS replied to the thread 40 node prod cluster restarts when joining a new node or removing..You can just add it to other NICs, recommended is to use several: https://pve.proxmox.com/wiki/Cluster_Manager#pvecm_redundancy ("Adding Redundant Links To An Existing Cluster")
-
Jjt_telrite replied to the thread TrueNAS Storage Plugin.on all hosts.....
-
fba replied to the thread 40 node prod cluster restarts when joining a new node or removing..Do you have an ETA already? -
Aasfasty reacted to jeenam's post in the thread [TUTORIAL] HOWTO - Proxmox VE 8-x.x Wifi with routed configuration with Like.
For the VNET subnet you can use any /24 subnet in the range of 192.168.x.x as long as it does not overlap with the 192.168.178.0/24 subnet of your main network.
-
fba replied to the thread 40 node prod cluster restarts when joining a new node or removing..What information regarding tuning corosync for a 40-node cluster are you referring to in the linked post?
-
RRicariel replied to the thread [TUTORIAL] PVE9 Create a VM Template for a Debian Trixie Server with Cloud-Init.Came here to debug my setup. found out: You can do q35 but not viommu.
-
Ggctwnl posted the thread Increasing an LVM on PVE which is mounted by a client, what do I need to keep in mind? in Proxmox VE: Installation and configuration.My PVE has the following physical volumes: root@pve:~# vgs -o +lv_size,lv_name VG #PV #LV #SN Attr VSize VFree LSize LV pve 1 6 0 wz--n- <931.01g 15.99g <794.79g data pve 1...
-
Ppatrick- replied to the thread Job ID wont show up in notification rules.Hi @SkyZoThreaD, you absolutely are not the only person experiencing this! I created an account on this forum just to respond to this issue. @Lukas Wagner I can verify exactly as reported here, there absolutely is a problem with the Proxmox...
-
shanreich replied to the thread VM gets all traffic from VLAN if VLAN exists also in SDN.My initial idea for a workaround was to just use a veth to connect the parent bridge with the vnet bridge, instead of creating a VLAN subinterface a la vmbr1.1234 - which causes the problem in the first place. But there are issues with VLAN-aware... -
Ttplecko posted the thread Yet another certificate problem in Mail Gateway: Installation and configuration.Using PMG 9.0.1, but the problem is the same for as long as I know of PMG. Before, we resolved the issue by placing a ssl offloader in front of PMG, but that solution is bad, as PMG has the ability to use certificates. We're using our own CA...
-
HHeracleos reacted to LKo's post in the thread [SOLVED] Super slow, timeout, and VM stuck while backing up, after updated to PVE 9.1.1 and PBS 4.0.20 with Like.
Ok, 6.16.0 and 6.16.12 were both fine, but I tested each only once, so it might not have triggered. Back on 6.17.11-2-test-pve and we get the stall once again. What's interesting this time, prx-hanspeter got stuck and then recovered after 17...
-
Ssanta_on_a_sledge replied to the thread Proxmox cloning corrupts the target image - extensive analysis included.Here is the clone task log: create full clone of drive efidisk0 (nvme-lvm-thin:vm-9000-disk-0) Rounding up size to full physical extent 4.00 MiB Logical volume "vm-1001-disk-0" created. Logical volume proxmox_vg0/vm-1001-disk-0 changed...
-
LLKo replied to the thread [SOLVED] Super slow, timeout, and VM stuck while backing up, after updated to PVE 9.1.1 and PBS 4.0.20.Ok, 6.16.0 and 6.16.12 were both fine, but I tested each only once, so it might not have triggered. Back on 6.17.11-2-test-pve and we get the stall once again. What's interesting this time, prx-hanspeter got stuck and then recovered after 17...
-
Jjt_telrite replied to the thread TrueNAS Storage Plugin.it seems that when I created a VM with Cloudinit device and moved it to "dev-stor" , realized that it wouldn't boot with the ISO stored on iscsi, deleted the device from the VM, it created an "orphaned" item. when I try to remove the device from...
-
Uuzumo replied to the thread 8700G iGPU 780m passthrough.Thanks Even though some issues remain, since what I really want is for it to withstand VM restarts, I'll try that.