Latest activity
-
Ppatch replied to the thread Temperature.From the opening post This thread is about showing temperature not ongoing monitoring. Please remain on topic. CPU usage, Memory usage, Hard disk space can all be readily monitored by external software. If availability of monitoring really...
-
jsterr posted the thread Any known downsides for using cpu/memory hotplugging? in Proxmox VE: Installation and configuration.Hello! :-) are there any known downsides for using cpu/memory hotplugging? Like performance impacts, stability issues? Greetings Jonas -
Uuwka77 replied to the thread NAS UGreen DXP4800 Plus.Hallo, wollte mich noch mal melden: TrueNAS Scale ist jetzt nativ auf der UGreen installiert. Auf den ersten Blick sieht auch alles gut aus (bis auf die sinnlose LED-Laufzeile am Gehäuse, wo bei UGOS der Status der Festplatten angezeigt wird)...
-
aaron replied to the thread [SOLVED] kaputtes CEPH nach Upgrade auf PROXMOX 9.1.2.Das klingt alles ein wenig seltsam. Ist evtl ein Repository auf die falsche Version konfiguriert? Kannst du mal apt update laufen lassen und den gesamten Output posten? -
Aaqwserf replied to the thread Migration error - failed: got signal 13.I've just upgraded and rebooted everything and now I'm still getting this signal 13 error but apparently now I have a possible cause, located at /usr/share/perl5/PVE/Tunnel.pm line 11: 2025-12-12 13:41:37 remote: started tunnel worker...
-
TTaz-Matt replied to the thread Random IO Error - Windows Server 2025.Hello, Just some feedback on this Friday. I have had absolutely no issues this week. I usually had an issue per day or two max prior to the changes I did. So it seems using qcow2 or raw disk images over zfs is causing issues. Since my setup...
-
Jjepper replied to the thread KRBD 0 Ceph prevents VMs from starting.I can confirm all the ports are listening (I have a 2 node ceph cluster just to be sure, it is configured as such deliberately) root@lab6:~# echo >/dev/tcp/10.112.212.71/3300||echo error root@lab6:~# echo >/dev/tcp/10.112.212.72/3300||echo error...
-
Jjepper replied to the thread KRBD 0 Ceph prevents VMs from starting.I have removed port numbers, and space separated the IP addresses. ## with krbd enabled root@lab6:~# grep -E "krbd|mon" /etc/pve/storage.cfg krbd 1 monhost 10.112.212.71 10.112.212.72 ## and qm start works root@lab6:~# qm start...
-
Mmeyergru replied to the thread ZFS storage is very full, we would like to increase the space but....Yes, However, I do not exactly know if Proxmox 8.4.1 already has the ZFS support to enlarge raidz1 arrays yet. It was added only in ZFS 2.3, AFAIR. The release notes say that ZFS is only at 2.2.7 with PVE 8.4...
-
Ccybermod replied to the thread ZFS storage is very full, we would like to increase the space but....I didn't express myself well; I tried to provide as much information as possible. I'll start again: The disks are on the server, but a hardware raid hasn't been created on the server because we know that zfs doesn't support hardware raids. The...
-
MMcHammer posted the thread [SOLVED] kaputtes CEPH nach Upgrade auf PROXMOX 9.1.2 in Proxmox VE (Deutsch/German).Hallo zusammen, Mein Homelab bestand aus 3 Clusternodes und lief unter Ceph. Wie in der Upgrade Anleitung beschrieben, habe ich zuerst PM auf V.8.4.6 angehoben, dann CEPH auf Trixie und anschließend PM auf V.9. Beim installieren kam es zu ein...
-
Ccybermod reacted to meyergru's post in the thread ZFS storage is very full, we would like to increase the space but... with
Like.
That ZFS pool is not a JBOD, but a ZFS raid-z1 with one of the three SATA disks as redundancy. With the current ZFS versions on Proxmox 9, you can safely add new disks to this setup, provided that they are of the same size as the existing disks... -
Eewallig@triangleaviation. replied to the thread PDM - shell access to remote node failed.Hi, Yes, several of the nodes are 9.0.x and one of them is 8.4.x. However, on the older nodes I'm getting a "pve-manager version too old" message (see attached). The connect error is only showing on the v9.1.x nodes. Thanks...
-
-
Falk R. replied to the thread Kann VM nicht (mehr) starten.Eigentlich muss man nur die Multipath Tools installieren und kann dann einfach mit multipath -a /dev/sdX dein SCSI Pfade adden/erlauben dass Multipath das Gerät claimen darf. Wenn du nur eine LUN hast, reicht es ein Gerät zu adden und die anderen... -
LLKo replied to the thread [SOLVED] Super slow, timeout, and VM stuck while backing up, after updated to PVE 9.1.1 and PBS 4.0.20.Ok, so I'll test 6.16, 6.16.12 and maybe 6.15 later today. It usually takes around 1,5hrs till the stall occurs. Also, I will try to kill just the stalled backup and see whether it recovers with the next one, as well as try iperf while the...
-
BBadej replied to the thread Manually test mail filter rules.You can test this with the spamassassin -t command. This allows you to run a test email through SpamAssassin and see which rules were triggered. Upload the message in EML format (test.eml) to the server and run: spamassassin -t -D < test.eml Or...
-
MMartin.B. replied to the thread Kann VM nicht (mehr) starten.Vernünftig geplant (und in Betrieb genommen) wurde es, aber halt für unsere jetzige VMWare Umgebung und mit den Einschränkungen was vorhandene Netzwerkleitungen zwischen den Standorten an geht. Und natürlich ist auch Kostendruck in einem...
-
Ggfngfn256 replied to the thread change proxmox host ip post install cli.Show the output of ip a from the Proxmox host.
-
Ssherminator replied to the thread [SOLVED] PBS 4: ZFS raidz2 - live expansion possible?.My news on this: It worked like a charm! zpool attach <poolname> <raidlevel> <new disk as in /dev/disk/by-id> For example (with random disk id): zpool attach my-pool raidz2-0 nvme-WUS4EB076B7P3E3_B0626C3A The expanding and scrubbing took a lot...
-
RRytecbe reacted to Fra's post in the thread [SOLVED] Any suggestion on a self-hosted email solution? with Like.
Just an update on our choice: We opted for ISPConfig (thanks Filipe!) As for the alternatives: * iredmail: super, but the free version does not let you do anything, so totally useless: the resulting configuration (auto installer) is pretty...
