Latest activity

What's new Featured content New posts New profile posts Latest activity
  • J
    jepper replied to the thread KRBD 0 Ceph prevents VMs from starting.
    I can confirm all the ports are listening (I have a 2 node ceph cluster just to be sure, it is configured as such deliberately) root@lab6:~# echo >/dev/tcp/10.112.212.71/3300||echo error root@lab6:~# echo >/dev/tcp/10.112.212.72/3300||echo error...
  • J
    jepper replied to the thread KRBD 0 Ceph prevents VMs from starting.
    I have removed port numbers, and space separated the IP addresses. ## with krbd enabled root@lab6:~# grep -E "krbd|mon" /etc/pve/storage.cfg krbd 1 monhost 10.112.212.71 10.112.212.72 ## and qm start works root@lab6:~# qm start...
  • M
    meyergru replied to the thread ZFS storage is very full, we would like to increase the space but....
    Yes, However, I do not exactly know if Proxmox 8.4.1 already has the ZFS support to enlarge raidz1 arrays yet. It was added only in ZFS 2.3, AFAIR. The release notes say that ZFS is only at 2.2.7 with PVE 8.4...
  • C
    cybermod replied to the thread ZFS storage is very full, we would like to increase the space but....
    I didn't express myself well; I tried to provide as much information as possible. I'll start again: The disks are on the server, but a hardware raid hasn't been created on the server because we know that zfs doesn't support hardware raids. The...
  • M
    McHammer posted the thread [SOLVED] kaputtes CEPH nach Upgrade auf PROXMOX 9.1.2 in Proxmox VE (Deutsch/German).
    Hallo zusammen, Mein Homelab bestand aus 3 Clusternodes und lief unter Ceph. Wie in der Upgrade Anleitung beschrieben, habe ich zuerst PM auf V.8.4.6 angehoben, dann CEPH auf Trixie und anschließend PM auf V.9. Beim installieren kam es zu ein...
  • C
    cybermod reacted to meyergru's post in the thread ZFS storage is very full, we would like to increase the space but... with Like Like.
    That ZFS pool is not a JBOD, but a ZFS raid-z1 with one of the three SATA disks as redundancy. With the current ZFS versions on Proxmox 9, you can safely add new disks to this setup, provided that they are of the same size as the existing disks...
  • E
    ewallig@triangleaviation. replied to the thread PDM - shell access to remote node failed.
    Hi, Yes, several of the nodes are 9.0.x and one of them is 8.4.x. However, on the older nodes I'm getting a "pve-manager version too old" message (see attached). The connect error is only showing on the v9.1.x nodes. Thanks...
    • shell nogo_currentversion1.JPG
    • shell nogo_currentversion2.JPG
    • shell nogo_tooold_message1.JPG
    • shell nogo_tooold_message2.JPG
  • Falk R.
    Falk R. replied to the thread Kann VM nicht (mehr) starten.
    Eigentlich muss man nur die Multipath Tools installieren und kann dann einfach mit multipath -a /dev/sdX dein SCSI Pfade adden/erlauben dass Multipath das Gerät claimen darf. Wenn du nur eine LUN hast, reicht es ein Gerät zu adden und die anderen...
  • L
    LKo replied to the thread [SOLVED] Super slow, timeout, and VM stuck while backing up, after updated to PVE 9.1.1 and PBS 4.0.20.
    Ok, so I'll test 6.16, 6.16.12 and maybe 6.15 later today. It usually takes around 1,5hrs till the stall occurs. Also, I will try to kill just the stalled backup and see whether it recovers with the next one, as well as try iperf while the...
  • B
    Badej replied to the thread Manually test mail filter rules.
    You can test this with the spamassassin -t command. This allows you to run a test email through SpamAssassin and see which rules were triggered. Upload the message in EML format (test.eml) to the server and run: spamassassin -t -D < test.eml Or...
  • M
    Martin.B. replied to the thread Kann VM nicht (mehr) starten.
    Vernünftig geplant (und in Betrieb genommen) wurde es, aber halt für unsere jetzige VMWare Umgebung und mit den Einschränkungen was vorhandene Netzwerkleitungen zwischen den Standorten an geht. Und natürlich ist auch Kostendruck in einem...
  • G
    gfngfn256 replied to the thread change proxmox host ip post install cli.
    Show the output of ip a from the Proxmox host.
  • S
    sherminator replied to the thread [SOLVED] PBS 4: ZFS raidz2 - live expansion possible?.
    My news on this: It worked like a charm! zpool attach <poolname> <raidlevel> <new disk as in /dev/disk/by-id> For example (with random disk id): zpool attach my-pool raidz2-0 nvme-WUS4EB076B7P3E3_B0626C3A The expanding and scrubbing took a lot...
  • R
    Rytecbe reacted to Fra's post in the thread [SOLVED] Any suggestion on a self-hosted email solution? with Like Like.
    Just an update on our choice: We opted for ISPConfig (thanks Filipe!) As for the alternatives: * iredmail: super, but the free version does not let you do anything, so totally useless: the resulting configuration (auto installer) is pretty...
  • Falk R.
    Falk R. replied to the thread Kann VM nicht (mehr) starten.
    Multipath ist eigentlich einfach, wenn man sich mit Storage auskennt. Ich kenne keine Anleitungen, da ich die gleichen Dinge im Linux machen muss wie schon vor 20 Jahren. Daher habe ich nie eine solche Anleitung benötigt. Sehr viel steht im Wiki...
  • Falk R.
    Falk R. replied to the thread Kann VM nicht (mehr) starten.
    ISCSI funktioniert natürlich noch, aber für Multipathing wird da nichts neues entwickelt oder in die GUI kommen. Wenn du noch 5 Jahre iSCSI fahren willst, hast du gerade etwas neues gekauft oder planst einen Kauf. Fast alle aktuellen Storages...
  • M
    Martin.B. replied to the thread Kann VM nicht (mehr) starten.
    Das ist Schade zu hören, da wir auch im produktiven Umfeld auf iSCSI setzen (und zumindest die nächsten 5 Jahre auch setzen werden). Da natürlich mit Redundanzen und einigen Pfaden. Schön wäre es schon das so ans Laufen zu bekommen, dass es nahe...
  • D
    Drthrax74 replied to the thread [TUTORIAL] NVIDIA drivers instalation Proxmox and CT.
    Hello, You GPU is bind by driver VFIO. Check IOMMU, REMAPPING Check GPU Logs: Check blacklist file on /etc/modprobe.d/
  • C
    ccorsani replied to the thread Local Datastore sync slow down after few minutes.
    root@psb3:~# proxmox-backup-manager version --verbose proxmox-backup 4.0.0 running kernel: 6.14.8-2-pve proxmox-backup-server 4.1.0-1 running version: 4.0.14 proxmox-kernel-helper...
  • G
    Gamordstrimer reacted to the_jest's post in the thread VM: trouble booting after adding HBA passthrough with Like Like.
    In case anyone comes across this later, the answer is that I needed to set `rombar=0` in the hardware settings for this device in the VM. Discussed in various places, but perhaps best here. Everything is fine now. Sorry for the lack of clarity...
Show older items
Top Bottom
Back