Latest activity
-
EEduardo Taboada replied to the thread How to Troubleshoot Regular Backup Failures?.Sometimes RAM errors in fact can be due a power supply failure. RAM needs precise voltage to reliably store data; too low voltage causes data corruption and may be the cause of the problem also.
-
FFrannce replied to the thread I need help finding out how to connect to my proxmox server..Just would like to inform that a friend and I changed the IP settings to a correct one after doing a fresh install. (The installer even showed a green dot this time when I changed the port) The proxmox: 10.0.0.21 the router: 10.0.0.1 DNS...
-
-
Jjt_telrite replied to the thread TrueNAS Storage Plugin.TrueNAS Plugin v1.1.7 - Installed --------------------------------- 1) Update plugin 2) Install specific version 3) Configure storage 4) Diagnostics 5) Rollback to backup 6) Uninstall plugin 0) Exit even after I update.
-
gurubert reacted to fba's post in the thread 40 node prod cluster restarts when joining a new node or removing. with
Like.
There is some documentation available for Corosync network setup: https://pve.proxmox.com/wiki/Cluster_Manager#pvecm_cluster_network Using bonds is not advised, shared links with other traffic types are not advised too. -
Yep, not a whole lot to say really - we have a 5 node ceph cluster (only 4 of which hold storage) and the SQL server's drives are on enterprise SSD backed ceph storage. Zero complaints about stability or performance. Couldn't see myself moving...
-
bbgeek17 replied to the thread I Have a Screen Full of This.Does this conversation match your concern and assist with resolving it? https://forum.proxmox.com/threads/proxmox-pve9-upgrade-apparmor-denied-messages.169553/#post-824122 Blockbridge : Ultra low latency all-NVME shared storage for Proxmox -... -
Bbroth-itk replied to the thread Proper OSD replacement procedure.Thanks for your feedback! The documentation of CEPH states: As far as I understand your method will create a new OSD not nut keep the previous ID and CRUSH map, right? This is why I created this post since I'd like to follow the official...
-
EEruanantion replied to the thread How to Troubleshoot Regular Backup Failures?.I have, and it passed all of the tests. I can paste the output here if you think it'll help. It's DDR3 RAM. I did consider that old RAM might be the issue since my PBS is an 11-year-old laptop (and I happen to know it was having RAM issues when...
-
Aaomer786 replied to the thread 40 node prod cluster restarts when joining a new node or removing..Thank you for the reply. I understand the recommendation now. Just based on the logs provided; is this in-fact a corosync issue being on the same physical network as others? or are there any tuning settings we can apply to help us through this...
-
Sspetrillo posted the thread I Have a Screen Full of This in Proxmox VE: Installation and configuration.Hello all, My proxmox server screen is full of audit messages that say apparmor="DENIED" operation="create". Has anyone seen this and what does this mean? Thanks, Steve
-
Sspetrillo replied to the thread Proxmox Host VLAN Numbering.So another stupid question.... My PC has a connection to a switch. I cannot change the vlan on the adapter, and so I have configured the switch to be vlan 2 untagged. I have a server, who's 10 gig port has two vlans configured for it, vlan 2 and...
-
LLKo replied to the thread [SOLVED] Super slow, timeout, and VM stuck while backing up, after updated to PVE 9.1.1 and PBS 4.0.20.Unfortunatly, same thing again. What's curious is that it is the same two nodes that stalled again - but that can simply be caused by these two nodes hosting mainly windows machines which have a higher rate of change. The other three nodes went...
-
SSimon1511 replied to the thread DKIM fail aufgrund von Leerzeichen im DKIM Selector.Hi, habe dir gerade mal 2 Mails gesendet. Die erste ist von meinem Mailserver signiert. Auf PMG hab ich DKIM ausgestellt gehabt. Laut MxToolBox und Co. ist die DKIM-Signatur da valide. In der zweiten Mail hab ich DKIM auf dem Mailserver...
-
LLueghi replied to the thread [SOLVED] Laufwerk fehlt Speicher.Ausgabe von lsblk -o+FSTYPE,MODEL: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT FSTYPE MODEL loop0 7:0 0 55.5M 1 loop /snap/core18/2959 squashfs loop1 7:1 0 55.5M 1 loop /snap/core18/2976 squashfs loop2...
-
UdoB reacted to fba's post in the thread 40 node prod cluster restarts when joining a new node or removing. with Like.
There is some documentation available for Corosync network setup: https://pve.proxmox.com/wiki/Cluster_Manager#pvecm_cluster_network Using bonds is not advised, shared links with other traffic types are not advised too. -
UdoB replied to the thread New Proxmox User.You are looking to build a new system, right? Then this is the moment to upgrade to ZFS and skipping hardware Raid. Some features you'll get...
-
Mmeichthys replied to the thread Dell PowerEdge T160 with Proxmox and GLOTRENDS M.2 PCIe Adapter - bus fatal error.@Prox_Fox Are you sure `bus 3 device 0` is the GLOTRENDS card? There have been similar reports for network cards here: https://forum.proxmox.com/threads/dell-fatal-error-was-detected-after-proxmox-install.151855/
-
Ttrollbot replied to the thread Backup von VM und Container auf mein NAS. How to?.Nimm mal bei "storrage" ein "r" raus, mit "NAS SAMBA storage Einbindung" finden sich zumindest schonmal zwei Postings, wie vielleicht ein guter Startpunkt für Dich sind. Gelesen habe ich sie nicht. Grundsätzlich besteht Dein Problem - ich bin...
-
fba replied to the thread 40 node prod cluster restarts when joining a new node or removing..There is some documentation available for Corosync network setup: https://pve.proxmox.com/wiki/Cluster_Manager#pvecm_cluster_network Using bonds is not advised, shared links with other traffic types are not advised too. -
CIt is possible to install the PDM on a VM?
