Latest activity
-
Ddigipen79 replied to the thread Dell OpenManage installation on Proxmox 9 with Debian 13.I just tried to run this script, and it fails at installing openswman, any ideas what may have happened? Also got this during install root@home1:~/opman# ./installOpenManage.sh Hit:1 http://ftp.us.debian.org/debian trixie InRelease Hit:2...
-
JIt uses Debian user space but a kernel based on Ubuntu. Since drivers and hardware support come with the kernel, use a Ubuntu Live Installer to test for hardware support. EDIT: Use an Ubuntu version with the same Linux kernel version as Proxmox...
-
Ccrux0ne reacted to paolone's post in the thread DELL fatal error was detected after Proxmox install with
Like.
Hello I've a DELL PowerEdge T440 updated with last firmware, bios, hd, network avaiable. I've a DELL Ethernet Quad Port Broadcom 5719. Installed Proxmox 8.2 at each reboot I've a idrac error: A fatal error was detected on a component at bus 1... -
Ccrux0ne replied to the thread DELL fatal error was detected after Proxmox install.Same problem here. With Dell T440. I firmly hope for a patch. Everything is updated, including the firmware of each hardware component and the newest updates from the Proxmox side. The problem is with the onboard NICs, Broadcom NetXtreme BCM5720...
-
Ggctwnl replied to the thread Approved Hardware List.I think PVE uses Debian and not Ubuntu, right? Not that it is a major difference, I suspect.
-
Ggctwnl posted the thread Is an ASUS NUC 13 a decent machine for a light load PVE instance? in Proxmox VE: Installation and configuration.Subject says it al. I have been running PVE/PBS on an Intel NUC 10th generation i5 and I am looking at a replacement with low power and affordable (hence DDR4) memory. My Intel NUC 10th gen has been iffy (e.g. the network hardware acceleration...
-
Jjwelvaert replied to the thread [TUTORIAL] NVIDIA drivers instalation Proxmox and CT.When I try to install the driver I get this error message - ERROR: Unable to load the kernel module 'nvidia.ko'. This happens most frequently when this kernel module was built against the wrong or improperly configured kernel sources, with a...
-
Pprahn replied to the thread Block format 'raw' does not support internal snapshots.Yes, of course, please find it here: root@pve1:~# pveversion pve-manager/9.1.1/42db4a6cf33dac83 (running kernel: 6.17.2-1-pve) root@pve1:~# qm config 103 agent: 1 boot: order=scsi0;ide2 cores: 4 description: **Windows Server 2012 R2** ide2...
-
bbgeek17 replied to the thread Can not create snapshot it says already exists.Based on the information provided we know that the VM configuration does not have a reference to any snapshots. However, the snapshots exits on the backend. They had to be created by an operator via PVE at some point. How the reference got lost... -
Bboisbleu replied to the thread Hänger unter Windows VM mit Sophos Endpoint.Teste doch mal den Windows Defender. Vielleicht genügt der euch ja?
-
SSecConIT posted the thread Disks (zfs / storage / devsd? / etc ) in Proxmox VE: Installation and configuration.Hi all, I’m working on reorganizing storage on a Proxmox VE 9.1.2 system with multiple HDDs, SSDs, NVMe devices, and a mix of SATA + LSI HBA-connected disks. While doing this I noticed something that has been a recurring challenge: Proxmox splits...
-
bbgeek17 replied to the thread Block format 'raw' does not support internal snapshots.Can you provide additional information: pveversion qm config [vmid] cat /etc/pve/storage.cfg cat /etc/pve/qemu-server/[vmid].conf pvesm status Are other VMs running on the same node? Are they located on the same storage (qm config [vmid]) Has...
-
Rrahman replied to the thread PBS pull sync job slows down about x20 after a while..It does not seem to happen on the same snapshot. See the attached screenshot. It is from last job status that started again after rebooting with default kernel on both PBS. Graph does not show the job start but it started at 16:38 with KBit/sec...
-
-
Ssanta_on_a_sledge replied to the thread Proxmox cloning corrupts the target image - extensive analysis included.It's a physical NVME disk on the proxmox node connected via PCIe4. . Here's lvmconfig: # lvmconfig --typeconfig full | grep -e thin -e zero wipe_signatures_when_zeroing_new_lvs=1 thin_pool_metadata_require_separate_pvs=0...
-
Bbroth-itk posted the thread Proper OSD replacement procedure in Proxmox VE: Installation and configuration.In our cluster there are currently three hosts with four 3.84TB RI OSDs each. I want to replace the four OSDs with 3.2TB MU SSDs, eventually adding a fifth OSD (later on). Currently there is only around 2.2TB used per OSD so this should work...
-
Mmikiz replied to the thread Can not create snapshot it says already exists.root@proxmox02:~# cat /etc/pve/qemu-server/113.conf agent: 0 bios: seabios boot: order=scsi0;sata0 cores: 4 cpu: x86-64-v2-AES machine: pc-i440fx-10.0 memory: 16384 meta: creation-qemu=10.0.2,ctime=1765223172 name: ISTGSSRVTRM1 net0...
-
DDerekG replied to the thread Temperature.As I understand it the sensors data is already available via Proxmox api, Pulse Monitor manages to pull the info for the CPU and NVMe at least.
-
Pprahn posted the thread Block format 'raw' does not support internal snapshots in Proxmox VE: Installation and configuration.Hi! I have a 3-node-cluster with CEPH storage, running the latest version 9.1.1. Of course all virtual hard disks on CEPH have the same format (raw) as nothing else can be used here. Today, I wanted to make a snapshot, but I receive an error in...
-
LLongQT-sea replied to the thread [SOLVED] Intel core i7 6700T HD530 iGPU passthrough.If Universal_noGOP_igd.rom is stable, just leave it as is. Thanks for sharing your setup, super helpful for others!
-
ZZippi replied to the thread iGPU HD530 passthrough issue on PVE 9.Yes, I'm very happy! In this thread, however, it doesn't give me the EDIT button to set SOLVED like the other one does...
