Latest activity
-
Mmolotch replied to the thread dnsmasq@zone1.service is not active.Ok, thanks alot. I see now that I missed that line in the guide. Sorry about that, sometimes things go to fast. https://pve.proxmox.com/pve-docs/chapter-pvesdn.html#pvesdn_install_dhcp_ipam EDIT: disabling dnsmasq did solve the problem
-
GGE_Admin replied to the thread [SOLVED] Super slow, timeout, and VM stuck while backing up, after updated to PVE 9.1.1 and PBS 4.0.20.Hello everyone, first round of tests and overnight backups completed successfully on my PBS (Kernel 6.17.11-1-test-pve) with 2 x 1 Gbps NICs aggregated in LACP with MTU at 1500. If tonight's round goes well too, I will put the second PBS back...
-
Wwolle22.hm replied to the thread Kann in neuem CT kein Netzwerk-Storage als Disk2 auswählen.Das habe ich ncht ganz verstanden. Mit Gast ist die CT gemeint? Und dann unter Hardware die NAS-Netzwerkfestplatte hinzufügen?
-
shanreich replied to the thread dnsmasq@zone1.service is not active.Yes, the error you're seeing is because the default instance is binding on ports, so the specific instances cannot bind to them anymore. -
DDark26 replied to the thread Add a PBS storage behind a proxy on PVE.Is it possible, or do we have to open a request feature ?
-
IIsThisThingOn reacted to JeanL's post in the thread PBS testimonial (hardware requirements are a joke) with
Like.
Hi, For deduplication YMMV, for example, if I look at our PBS, it's pretty good with more than 90% of Linux VMs (more than 60% of these Linux machines are Debian), and retention from 14 to 365 days. We have critical VMs which backups run every... -
KKonstantin2000 reacted to Badej's post in the thread PMG rule: quarantine emails from gmail.com if recipient count exceeds 3 with Like.
You can add a rule in custom.cf that will add 5.0 points if the sender's address is @gmail.com and the recipient's address is 3+ header __FROM_GMAIL_ADDR From:addr =~ /@gmail\.com$/i header __TO_MANY_RCPT To =~...
-
Jjtru replied to the thread Ceph OSD woes after NVMe hotplug.We came up with the following sequence of commands to fix the OSD after it had failed due to the events/triggers described above: vgchange -an ceph-YOUR_VG_HERE vgchange -ay ceph-YOUR_VG_HERE chown ceph:ceph /dev/YOUR_DM_NODE_HERE systemctl...
-
JJohannes S reacted to zimbolearner's post in the thread [SOLVED] 500 Internal Server Error on Raspberry Pi Docker prometheus-pve-exporter with Like.
Found the solution, When creating the token ensure that it has --privsep=0. This ensures that the token has full permissions like the user.
-
Cczechsys replied to the thread Proxmox Datacenter Manager 1.0 (stable).Any option to have "cluster name" or alias for cluster in remotes? Having cluster hidden under hostname is little confusing...
-
OOnslow replied to the thread How to Troubleshoot Regular Backup Failures?.Welcome to the Forum, @Eruanantion . Unless your RAM is of ECC type it can also be the culprit. You can also try verifying the backups again. I have seen situations where next verification succeeds.
-
Pplentman replied to the thread e1000 driver hang.First of all, thank you for the information. I ran a few more tests yesterday. With post-up ethtool -K nic0 tso off in the interfaces, it was a little better. Everything was fine during continuous operation, but when I made backups on the PBS...
-
WWMTaylor3 replied to the thread After updating to Proxmox 9, virtual machines crash..Just made an account to ask if there has been any update on this? I have a very similar set up. Ubuntu Server 24.xx VM with an RTX3060 in passthrough. Proxmox is on version 9. Never ran this on Version 8 so unsure if the issue exists there. I'm...
-
Dder_dom replied to the thread Container öffentliche IPv6 zuweisen.Ich glaube da gibt es ein Missverständnis, der DS Lite Anschluss ist von einem Nutzer. Und ganz genau, da läuft alles über IPv6, außer Traffic an IPv4 only Server. Das Tunnelt der ISP über ein Gateway. Mir geht es nicht um diesen Anschluss...
-
Zzimbolearner replied to the thread [SOLVED] 500 Internal Server Error on Raspberry Pi Docker prometheus-pve-exporter.Found the solution, When creating the token ensure that it has --privsep=0. This ensures that the token has full permissions like the user.
-
RRytecbe reacted to Onslow's post in the thread PBS on desktop pc with SSD or in VM on PVE or not at all? with Like.
I've just noticed that you added the following questions to an older post. Comparing dates I can see that then I was already answering to the version before your editing, That's why I didn't notice the update then...
-
RRytecbe reacted to Johannes S's post in the thread PBS on desktop pc with SSD or in VM on PVE or not at all? with Like.
https://pbs.proxmox.com/docs/managing-remotes.html and https://pbs.proxmox.com/docs/storage.html#ransomware-protection-recovery are the relevant parts of the manual. Basically the idea is that you wake up the second PBS just for pulling backups...
-
Rrungekutta replied to the thread SR-IOV success stories?.Interesting, thanks. In my case host runs Ceph and I would like to do that over the same NIC that I also virtualise with SR-IOV to guests. We never had any stability issues with Linux bridges and performance is quite good too, so SR-IOV is more a...
-
fiona replied to the thread [SOLVED] migration fail.Hi, yes, it can. Does your token have the correct access rights for the storages on the target? Are the relevant storages on the target all active/enabled? -
SSiski replied to the thread SR-IOV success stories?.Hello rungekutta, Actually we limit the output speed with "ip link set .... max_tx_rate" to 5G. This is more like a safty thing to avoid the theoretical possibility that one VM is eating all bandwidth. I tested this option with 100 MBit/s or 1...