Latest activity
-
JJohannes S replied to the thread PBS on desktop pc with SSD or in VM on PVE or not at all?.https://pbs.proxmox.com/docs/managing-remotes.html and https://pbs.proxmox.com/docs/storage.html#ransomware-protection-recovery are the relevant parts of the manual. Basically the idea is that you wake up the second PBS just for pulling backups...
-
Jjpbiker replied to the thread Speichermangel, keine CT mehr anzulegen obwohl genügend Platz ist.Hab's geändert, danke. passt! Ich habe etwas experimentiert, eigentlich wollte ich auf dem LVM ein virtuelles Datenaustauschlaufwerk erstellen. Hat nicht funktioniert, dabei ist aber anscheinend was schiefgegangen. Wobei ich dieses config-file...
-
JJohannes S reacted to Onslow's post in the thread PBS on desktop pc with SSD or in VM on PVE or not at all? with
Like.
@Rytecbe, when you are configuring the PBS, I recommend using namespaces in the datastore. For instance you can create a separate namespace for each PVE node or each physical machine. Thanks to namespaces there is no conflicts from possible... -
JJohannes S reacted to UdoB's post in the thread PBS on desktop pc with SSD or in VM on PVE or not at all? with Like.
My PBS's use surprisingly low CPU resources. The limits come from the storage system. Usually. I would opt for the low power device to run 24*7 and cascade the other one, as mentioned. I am not sure if I understand that correctly...
-
JJohannes S reacted to Onslow's post in the thread PBS on desktop pc with SSD or in VM on PVE or not at all? with Like.
"The only usecase for any backup server is to restore data when (not: if) the source system fails." Another usecase is restoring a file when the source system is OK and someone needs the file which has been deleted or modified in the meantime :).
-
JJohannes S reacted to UdoB's post in the thread PBS on desktop pc with SSD or in VM on PVE or not at all? with Like.
You have four (or is it five?) technically different devices which leads to a lot of possible combinations regarding a PVE cluster and a PBS. I can not give you one single way to go. But I have some hint from my point of view: The problematic...
-
Rrungekutta replied to the thread SR-IOV success stories?.Good to hear that it works for you! Do you achieve full switching speed between VFs on the same physical port? On VFs across physical ports? Do you let host use the physical port and assign VFs to VMs, or do you only do VFs? Personally I found...
-
RRytecbe reacted to Johannes S's post in the thread PBS on desktop pc with SSD or in VM on PVE or not at all? with Like.
One thing to consider for using the PBS as qdevice: If you add a host as qdevice every node of the cluster can login as root on the qdevice (and thus the PBS) without additional authentification. This is something you usually don't want on your...
-
JJohannes S replied to the thread PBS on desktop pc with SSD or in VM on PVE or not at all?.One thing to consider for using the PBS as qdevice: If you add a host as qdevice every node of the cluster can login as root on the qdevice (and thus the PBS) without additional authentification. This is something you usually don't want on your...
-
Ccarles89 reacted to RoCE-geek's post in the thread Redhat VirtIO developers would like to coordinate with Proxmox devs re: "[vioscsi] Reset to device ... system unresponsive" with Like.
This is what I've already suggested in my original post: Yesterday evening I made some waves to finally get some attention of the maintainers (I've tagged them at least few times in the manner: "maintainers may decide" - last attempt was in...
-
JJa natürlich, das ist der Standard von BackitUp. Zeig mal deine Einstellungen. Sollten wir aber besser im iobroker Forum diskutieren. PVE hat da nix damit zu tun.
-
Mmoshe.aa posted the thread create a VLAN without having a physical switch or changing anything in the router in Proxmox VE: Networking and Firewall.Hi, I want to create a VLAN in my Proxmox, I have a router provided by my ISP and all of it's ports are used, one of them is connected to my Proxmox server. By checking my ISP router, it's seems like id doesn't support managing VLAN's. The goal...
-
Ccarles89 reacted to Whatever's post in the thread Redhat VirtIO developers would like to coordinate with Proxmox devs re: "[vioscsi] Reset to device ... system unresponsive" with Like.
Perhaps the Proxmox team could consider building its own version of virtio drivers with its own installer, signed by Proxmox. This would allow for faster patch deployment, as is done for other subsystems (ZFS, etc.). @fweber
-
Ihttps://forum.proxmox.com/threads/does-proxmox-have-a-hcl-hardware-compatibility-list.175802/post-815369
-
IIceManJB reacted to riahc3's post in the thread Does Proxmox have a HCL (Hardware Compatibility List)? with Like.
Hello I think from a business perspective this is important to have. A list (servers more so, besides hardware) that Proxmox has been tested on in some way shape or form and it works. Obviously it is very difficult to test every single...
-
IIceManJB reacted to MarkusKo's post in the thread Does Proxmox have a HCL (Hardware Compatibility List)? with Like.
Hi riahc3 There is no offical PVE HCL but PVE uses a modified Ubuntu Kernel you can check the Ubuntu HCL. PVE9 currently uses Kernel version 6.14 (Ubuntu HWE) and you can opt-in for a 6.17 Kernel. Just be aware that the Ubuntu HCL, as you...
-
Eerjamon replied to the thread Failing to boot Home Assistant qcow2 image disk - UEFI Access Denied.Another guy here who created the account just to say THANK YOU!! May $Deity be pleased by your altruism to others.
-
bbgeek17 replied to the thread [SOLVED] Proxmox backup in NAS SYNOLOGY.I don't think this thread is about the session timeout. It's the fact that PVE uses SMB connect/teardown as a means to probe/healthcheck the CIFS storage. https://github.com/proxmox/pve-storage/blob/master/src/PVE/Storage/CIFSPlugin.pm#L271... -
SSteveITS replied to the thread SDN broken after using pve-network-interface-pinning tool.I think I would need to enable that (VLAN aware) on all nodes first, right? It may take me a few days.
-
Gguruevi replied to the thread [SOLVED] Proxmox backup in NAS SYNOLOGY.@macmino: the default session timeout for SMB sessions is 15 minutes. This is the Microsoft recommended behavior in order not to exhaust the maximum number of connections (and license consumption) on large servers. You can on the file server...