Latest activity
-
UdoB reacted to RedLemon's post in the thread [TUTORIAL] Advanced Wake-On-LAN daemon for Proxmox (VM + LXC, auto-MAC mapping, cooldown, logging, systemd-ready) with
Like.
Hello everyone, I recently needed a reliable solution to start VMs and LXC containers on my Proxmox node using Wake-On-LAN packets, without relying on external systems (Home Assistant, scripts on another machine, API calls, etc.). I found the... -
UdoB replied to the thread PBS testimonial (hardware requirements are a joke).Obviously that depends on the modified data per interval and the "prune"-settings. And it needs a number of backups present to work at all :-) Both my dayjobs cluster and my homelab show around 30 - with basically "everything daily". If I would...
-
Wwissens-hunger posted the thread Proxmox 8 Upgrade auf 9 Fehler im Log Fenster bei einem LXC in Proxmox VE (Deutsch/German).Hallo zusammen, Bin neu hier im Forrum :-) Habe einen Hardware Proxmox mit der Version 8.4.14 und möchte diesen auf Proxmox 9 Upgraden. Da ich nicht soviel Erfahrung mit Promox habe, hatte ich mir eine Proxmox VM 8.4.14 mit einer VM und paar...
-
UdoB reacted to IsThisThingOn's post in the thread PBS testimonial (hardware requirements are a joke) with Like.
Clickbait headline, but I think it is true :) Maybe others can chime in with their setups and why they need beefy hardware. Here is my PBS testimonial. Reading the documentation I was a little bit scared. Especially the storage part seemed...
-
eventuell hilft auch ein system firmware update, falls es eins gibt.. -
Falk R. replied to the thread VMware migration zu Proxmox Windows.Und für das pvcreate hast du dm-0 genutzt und nicht eine scsi Bezeichnung wie z.B. sdc? Dann war die MSA vorher schon schlecht eingerichtet und empfohlen ist natürlich von jedem Controller eine Verbindung zu jedem Switch. Dann sollten auch 4...
-
Mmaxim.webster replied to the thread neuer PC - neue Installation - ständige Abstürze.Das Fehlerbild kenne ich (egal ob Mini PC oder Desktop) von defektem Speicher oder welchem, der mit zuwenig Spannung oder zu scharfem Timing gefahren wird.
-
Nns33 replied to the thread Frr update to 10.4.1-1 broke external routing?.Here you go!
-
OOnslow replied to the thread [SOLVED] Prune Job not doing its work.In any doubt use Prune Simulator at https://pbs.proxmox.com/docs/prune-simulator/index.html
-
JJohannes S reacted to IsThisThingOn's post in the thread PBS testimonial (hardware requirements are a joke) with Like.
Clickbait headline, but I think it is true :) Maybe others can chime in with their setups and why they need beefy hardware. Here is my PBS testimonial. Reading the documentation I was a little bit scared. Especially the storage part seemed...
-
Fflynnwt reacted to maturos's post in the thread [SOLVED] Adding existing disk from storage to vm with Like.
With eyes squinted and fingers crossed, I removed local-lvm with the GUI. It worked: root@pve:~# pvesm status Name Type Status Total Used Available % Backups dir active 923729268...
-
Mmicneu replied to the thread neuer PC - neue Installation - ständige Abstürze.Moin, keine Ahnung, welche VMs künftig auf dem System laufen sollen, aber ein N150 erscheint mir dafür nicht ideal. Ich selbst nutze einen Intel NUC BNUC11TNHV50L00 mit 32 GB RAM. Wie bereits andere gefragt haben: Bitte nenne den...
-
Kksb reacted to RoCE-geek's post in the thread Redhat VirtIO developers would like to coordinate with Proxmox devs re: "[vioscsi] Reset to device ... system unresponsive" with Like.
This is what I've already suggested in my original post: Yesterday evening I made some waves to finally get some attention of the maintainers (I've tagged them at least few times in the manner: "maintainers may decide" - last attempt was in...
-
IIsThisThingOn posted the thread PBS testimonial (hardware requirements are a joke) in Proxmox Backup: Installation and configuration.Clickbait headline, but I think it is true :) Maybe others can chime in with their setups and why they need beefy hardware. Here is my PBS testimonial. Reading the documentation I was a little bit scared. Especially the storage part seemed...
-
Mmolotch replied to the thread dnsmasq@zone1.service is not active.Nope, didn't disable dnsmasq. Should I try that command?
-
RRoCE-geek replied to the thread Redhat VirtIO developers would like to coordinate with Proxmox devs re: "[vioscsi] Reset to device ... system unresponsive".This is what I've already suggested in my original post: Yesterday evening I made some waves to finally get some attention of the maintainers (I've tagged them at least few times in the manner: "maintainers may decide" - last attempt was in...
-
HHeracleos reacted to LKo's post in the thread [SOLVED] Super slow, timeout, and VM stuck while backing up, after updated to PVE 9.1.1 and PBS 4.0.20 with Like.
First test looks promising, though the rcv_wnd does fluctuate quite a bit as does the transfer speed, I haven't seen that before with 6.14 (might also be the case I didn't pay too much attention to it). I can say more in the morning when the...
-
Ffrapel25 replied to the thread Esxi migration starts fast then becomes really slow..Hello, I've put the ssd into another server without raid controller, so just connected to the sata port, and everything worked correctly. The import took 15 minutes instead of hours. I think there's something wrong with the dell server or at...
-
TSince this thread comes up under some common proxmox networking searches, and most of us reporting problems are running Intel NIC's, I'll cross link to this thread...
-
shanreich replied to the thread SDN broken after using pve-network-interface-pinning tool.As a workaround, the issue should be fixed if you use a vlan-aware bridge as the underlying bridge of the VLAN zone and reapply the SDN config - since there we do not rely on generating a config with the physical port.