Ich vermute hier Liegt es am LTO6. Ich selbst nutze schon ewig kein Tape mehr, aber bei Kunden habe ich noch LTO7 im Einsatz auch mit HPE Library, ohne irgendwelche Meldungen.
Awesome!!
Two probably dumb question:
how would I go about getting the patch into my environment? Build from source? My means of transferring anything to the cluster is through sneaker-net. Or would the patched package be found in...
Hi,
This is a rather old thread, you may have already found the answer and probably knows more now, but here I am sharing what I know about this topic.
In general it safe, as it doesn’t affect running VMs. However, since it may impact the web...
Ja natürlich, das ist der Standard von BackitUp. Zeig mal deine Einstellungen.
Sollten wir aber besser im iobroker Forum diskutieren. PVE hat da nix damit zu tun.
I’m on PVE 9.0.10 and just swapped a PCIe gen2.0 Intel card for a PCIe gen3.0 Mellanox ConnectX-4 LX (MCX4121A-ACUT) to make better use of the limited lanes on my mother board’s slot. The MCX4121A-ACUT is running the latest F/W 14.32.1900. My PVE...
This is good to know @dcuadrados . Thanks for the info!
On my end, I still had issues in spite of all the changes I did, they were just less frequent. I decided to start moving VMs around my cluster to reinstall the hosts properly. I decided...
Hi,
nachdem versucht wird, den nvidiafb Treiber zu laden - probier es mal mit dem nomodeset kernel parameter: https://pve.proxmox.com/pve-docs/pve-admin-guide.html#nomodeset_kernel_param
Der hilft normalerweise, ist leider ein recht bekanntes...
After downgrading to driver version 0.1.271, my Windows Server 2025 Datacenter VMs have been completely stable. Previously, both machines were crashing at least 1-2 times per week. Since the downgrade, they've been running for over a month...
Hi guys, I have decided to make this thread as there is threads popping up related to the ARC.
In my experience ZFS ARC is a lot more polite than the old 'host page cache', and is also actually much more configurable. However its defaults are...
Hi @markeczzz .
Yes, you can use the same hardware with PVE. It should be very stable, assuming there’s nothing unusual in your specific infrastructure. The best practices are essentially the same as with any FC-based setup: dual HBAs, dual...
Hi,
please share the configurations of some affected VMs, qm config ID replacing ID with the actual numerical ID and the output of pveversion -v. What kind of guest OS and kernel is running inside the VM?
Hello,
My current setup is oVirt cluster with nodes connected via FC to Huawei Storage that has FC LUNs.
Each node has 2 connections to storage.
Is it possible to use same setup with Proxmox, and how stable it is? Any problems i could expect...
Moin MickyF,
ich habe die gleiche Meldung auf meinem System, hast du die Befehle wie in der Meldung beschrieben ausgeführt und zusätzlich das apt remove ...
Also so ?
echo 'grub-efi-amd64 grub2/force_efi_extra_removable boolean true' |...
The /etc/fstab could look like this
# backup
UUID=7751d33a-13dc-45f2-83b3-49016c708672 /mnt/usb-backup ext4 defaults,nofail 0 2
Before you mount it (via mount -av) I'd suggest you run this
# Delete the old data
rm -rf /mnt/usb-backup
# Create...
I have created a zone with two different VNets (SNAT enabled and DHCP range configured), and I would like to know how to isolate them, because a VM on one VNet and another VM on the other VNet, with different subnets, can still ping each other.
Hi @Elbandi,
what exactly does "this" mean? Please share the VM configuration qm config ID replacing ID with the actual numerical ID as well as the output of pveversion -v. Are you sure you checked the correct disk inside the VM? Drive letter...
Yes. As a hint you can use this thread: https://forum.proxmox.com/threads/offsite-backup-to-external-usb-drive-possible.173374/
The question there is a little different but the idea is similar.