Latest activity

What's new Featured content New posts New profile posts Latest activity
  • L
    LongQT-sea replied to the thread Core Ultra 9 285T iGPU passthrough on PVE 9.x + keep VM console output?.
    Try with the latest Ubuntu 25 iso https://releases.ubuntu.com/25.10/ubuntu-25.10-desktop-amd64.iso No installation is needed, just change the boot order and set the IDE (ISO) as the first boot device. Start the VM then wait about 1 minute, then...
  • G
    gfngfn256 replied to the thread Create vm errors.
    You also probably want to change the BIOS to OVMF (UEFI) for Windows 11.
  • fiona
    fiona replied to the thread Identical LDAP configuration on Backupserver and VE - different results.
    Hi, please open a bug report: https://bugzilla.proxmox.com/ so this does not get lost in the forum. Note that it's not the same as #1909 because that is about usernames, but that could be added as a reference with the See Also field afterwards.
  • J
    Johannes S replied to the thread Proxmox Datacenter Manager - First Alpha Release.
    Yes since PVE and PDM are both based on Debian: https://pdm.proxmox.com/docs/installation.html#install-proxmox-datacenter-manager-on-debian This doesn't make it a good idea to install it on a PVE node though: If it' installed with a VM (with...
  • J
    Johannes S reacted to narrateourale's post in the thread Licensing Question with Like Like.
    It is only about the repositories that the PDM itself can access to get its own updates. Using the update function for seeing available updates and trigger them from the PDM directly is working either way in my experience.
  • F
    FloRe replied to the thread Error within Administration-Updates.
    I checked the FAQ and everything seems to be in order. Like kingsbro said:
    • 1765285904808.png
  • K
    kingsbro replied to the thread Error within Administration-Updates.
    I get the same error and I have a valid installation. Err:4 https://enterprise.proxmox.com/debian/pdm trixie InRelease 401 Unauthorized [IP: 2a0b:7140:5:100::167 443] Error: Failed to fetch...
    • 1765285823961.png
  • R
    rpool replied to the thread Core Ultra 9 285T iGPU passthrough on PVE 9.x + keep VM console output?.
    I tried this config: args: -set device.hostpci0.bus=pci.0 -set device.hostpci0.addr=2.0 -set device.hostpci0.x-igd-opregion=on bios: ovmf boot: order=scsi0;ide2;net0 cores: 4 cpu: host hostpci0: 0000:00:02.0,romfile=igd.rom vga: std After...
    • 1765285816623.png
  • mkoeppl
    mkoeppl reacted to Dwx's post in the thread [SOLVED] Problems after adding Node3 with Like Like.
    The issue was caused by the time setting. Thanks you very much - I completely forgot about that.
  • J
    jdancer replied to the thread Storage for production cluster.
    You need to really confirm that write cache enable is turned on via 'dmesg -t' output on each drive. If the write/read cache is disabled, it really kills the IOPS. While technically 3-nodes is indeed the bare minimum for Ceph, I don't consider...
  • D
    Dwx replied to the thread [SOLVED] Problems after adding Node3.
    The issue was caused by the time setting. Thanks you very much - I completely forgot about that.
  • mkoeppl
    mkoeppl replied to the thread [SOLVED] Problems after adding Node3.
    Hi! It could be that the system times of the nodes are out of sync. You can run journalctl -u chronyd and check if it shows any errors regarding times being out of sync.
  • B
    Badej replied to the thread PMG rule: quarantine emails from gmail.com if recipient count exceeds 3.
    You can add a rule in custom.cf that will add 5.0 points if the sender's address is @gmail.com and the recipient's address is 3+ header __FROM_GMAIL_ADDR From:addr =~ /@gmail\.com$/i header __TO_MANY_RCPT To =~...
  • fiona
    fiona replied to the thread Create vm errors.
    Hi, seems like you upgraded qemu-server without also upgrading the pve-qemu-kvm package, which is necessary for the new "TPM as qcow2" feature. In particular, you need version 10.1.2-2 or newer: pve-qemu-kvm (10.1.2-2) trixie; urgency=medium *...
  • fiona
    fiona replied to the thread Proxmox PVE9 Upgrade - Apparmor Denied Messages.
    Hi @MickyF, you could allow read access inside the /etc/apparmor.d/usr.sbin.rsyslogd profile inside the container, please see...
  • M
    Melone145 posted the thread QEMU VM startup timeout in Proxmox VE: Networking and Firewall.
    Hello everyone, I installed a firewall on my server following these instructions that I wrote myself: https://github.com/Melone155/Firewall-Setup-under-Proxmix/tree/main Now I have the following problem: when I add a WAN and LAN bridge as...
  • jsterr
    jsterr reacted to Falk R.'s post in the thread [TUTORIAL] Kleiner Gamechanger bei der Windows Migration zu Proxmox with Like Like.
    Du darfst das Script nicht per Klick starten, außer bei 2022+. Immer eine CMD oder PS mit dem Pfad der CD aufmachen und da ausführen. Ein auslesen des CD Laufwerks scheitert leider, wenn mehrere Laufwerke vorhanden sind. Wenn jemand einen guten...
  • B
    Badej replied to the thread issue with DNS BL?.
    Access to Validity reputation data is paid. If the messages are bothersome, you can block them by calling custom.cf dns_query_restriction deny sa-trusted.bondedsender.org dns_query_restriction deny sa-accredit.habeas.com dns_query_restriction...
  • ggoller
    ggoller replied to the thread Frr update to 10.4.1-1 broke external routing?.
    But this should also be fixed by restarting frr using systemctl restart frr. If this problem persists, please paste the full frr config and the full error log.
  • M
    micneu replied to the thread Wie auf Dateien zugreifen?.
    Sehr gut. Wie man den Benutzer wechselt, lässt sich übrigens leicht im Internet finden – einfach nach „Linux: Wie werde ich root“ suchen. Voraussetzung ist natürlich, dass das System korrekt konfiguriert ist.
Show older items
Top Bottom
Back