Latest activity

What's new Featured content New posts New profile posts Latest activity
  • UdoB
    UdoB replied to the thread proxmox update download 70kb.
    For example: echo 'Acquire::ForceIPv4 "true";' | tee /etc/apt/apt.conf.d/99force-ipv4 This works obviously only for apt; the rest of the IP stack is not affected by this.
  • UdoB
    UdoB replied to the thread Need ZFS or general config advice on mixed HPE DL360 cluster setup to replace vmware..
    ZFS with HDD without Special Device? (( The difference between Sata SSD and PCIe NVMe is theoretically large. Practically it is not - in this context. The important aspect is the access time compared to the rotating spindles. Data access will...
  • cwt
    cwt replied to the thread Welche m2 2280.
    Wenn nur das System selbst auf die M.2 soll, würden die Kingston reichen. Gibt es mit max. 960GB.
  • O
    origin0923 replied to the thread Dual GPU Nvidia L40s Support on single VM.
    Hi, Did you turn on SR-IOV in BIOS? I assigned 2 gpus to resources mapping in datacenter. And I added 2 gpus to VM. Finally, I could see 2 gpus by nvidia-smi in ubuntu 24.04 server VM.
  • O
    origin0923 replied to the thread Dual A100 Passthrough to Ubuntu 22.04 VM - Proxmox8.
    Hi, Did you turn on SR-IOV in BIOS? I assigned 2 gpus to resources mapping in datacenter. And I added 2 gpus to VM. Finally, I could see 2 gpus by nvidia-smi in ubuntu 24.04 server VM.
    • 1765262081746.png
    • 1765262394475.png
    • 1765262424227.png
  • R
    rpool posted the thread Core Ultra 9 285T iGPU passthrough on PVE 9.x + keep VM console output? in Proxmox VE: Installation and configuration.
    Hi all, I’m on Proxmox VE 9.1.1 and trying to passthrough the Intel Core Ultra 9 285T iGPU to a VM for media decode. Host CPU: Core Ultra 9 285T MB: Gigabyte Z890 AI TOP PVE: 9.1.1 BIOS: VT-d enabled, iGPU enabled VM OS: FeiNiu OS 1.0.0...
  • B
    bedeberger reacted to zyghom's post in the thread Decrease a VM Disk Size with Like Like.
    excellent tutorial, a lot of fear but actually it was 2 commands: lvm lvreduce -L -32g pve/vm-103-disk-0 qm rescan and from 64GB it became 32GB
  • M
    Martin_Abr reacted to Falk R.'s post in the thread KMS installieren unter Proxmox with Like Like.
    Wer hat dir denn so einen Unsinn erzählt? Wenn du Lizenzen gekauft hast, z.B. OEM oder Systembuilder, dann hast du eh nur MAK Keys und die gibst du brav deinen VMs und alles ist gut. Einen KMS brauchst du nur wenn die Server automatisch Lizenzen...
  • A
    Arity replied to the thread Can't connect to Proxmox GUI.
    Unfortunately the web interface still won't connect. ss -tlnp | grep 8006 returned: LISTEN 0 4096 0.0.0.0:8006 0.0.0.0:* users:(("pveproxy worker",pid=385558,fd=6),("pveeproxy worker",pid=385557,fd=6),("pveproxy...
  • news
    news replied to the thread SDN network communication.
    Sdn network mean SNAT the globle private Network. You can only connect one way to other networks.
  • E
    Eduardo Taboada replied to the thread SDN network communication.
    The zones are logically separated; you must install a device (router) that allows communication between zones.
  • B
    bjoern.anger replied to the thread MAM Attribute 800: Illegal Request.
    Danke für Rückmeldung. Von Abbruch war nie die Rede. Aber das jeder Job der ein Band das erste Mal "neu" / vom Anfang an beschreibt mit einer Warnung markiert wird ist (aus meiner Sicht) wenig hilfreich. Zumal es so zu sein scheint, das es...
  • E
    Eduardo Taboada replied to the thread [SOLVED] migration fail.
    Which version of Proxmox do you have at the destination? It will be a problem with the versión of Proxmox at the destination cluster, because live migration is only supported on latest PVE 8 versions
  • X
    xybo replied to the thread RSTP on Switch with Proxmox.
    Ok, thanks for this!
  • X
    xybo reacted to PHPMaroc's post in the thread RSTP on Switch with Proxmox with Like Like.
    Hi, You don’t need to configure RSTP on your Juniper switch for that trunk port. The reason is that the vmbr1 bridge in Proxmox behaves like a simple switch internally, so it doesn’t participate in spanning tree. What you really need to do is...
  • K
    kk_proxmox posted the thread [SOLVED] migration fail in Datacenter Manager: Installation and configuration.
    my pdm version is 1.0.1 i get this error when i migrate to different cluster any one helps tks a lot
    • 1765260699815.png
  • fba
    fba replied to the thread Can't connect to Proxmox GUI.
    make sure there is no whitespace between the - and the tlpn For the journalctl command: the first 10-20 lines are enough. As the pveproxy seems to work now, testing if the web interface is available is an option too, of course.
  • E
    Eduardo Taboada replied to the thread Server keeps crashing.
    It appears to be a problem with the UEFI. Try to update UEFI BIOS settings and PCI devices (PCI0.GPP1)
  • K
    k725 posted the thread ArchLinux not found in LXC template in Proxmox VE: Installation and configuration.
    After updating to Proxmox 9.1, I noticed that ArchLinux is not listed in the list of LXC container templates in GUI page. However, it seems to be listed on http://download.proxmox.com/images/system/ . The same issue has also been raised in...
    • 1765259441069.png
  • E
    Ernst T. replied to the thread Speicherverteilung (Bootdisk-Größe).
    Die ContainerBackups hast du auf den Storage "USB" gemacht, was vollkommen in Ordnung ist. Dein Problem sind die Backups vom ioBroker- Adapter "BackitUp" und dass diese - nach übertragen zu Google-Drive - nicht gelöscht werden.
Show older items
Top Bottom
Back