Latest activity
-
UdoB replied to the thread Welche m2 2280.https://geizhals.de/?cat=hdssd&xf=7139_>=480GB~7156_Power-Loss Protection Schlechte reale Auswahl... :-( Aber die Filtermöglichkeiten sind gut... MIt "M.2" Filter =... -
Aalexskysilk replied to the thread New Proxmox box w/ ZFS - R730xd w/ PERC H730 Mini in “HBA Mode” - BIG NO NO?.your disks have been wiped. this doesnt happen on its own.
-
JWo ist den jetzt der unterschied zwischen vmware und proxmox dabei? sind beides Hypervisor, die nichts mit Windows Aktivierung als solches zu tun haben. Kann mich aber täuschen….
-
Aalexskysilk replied to the thread Multipath configuration to Pure storage array (VLANS).having iscsi links separated is IDEAL, and works in most instances. iscsi over LACP can, AT BEST, match the performance of seperated links, but in practice this can be quite challenging. Storage vendors rarely have any control over the end user...
-
JJohannes S reacted to alexskysilk's post in the thread Question on PBS setup and hardware with
Like.
We're looking at it from opposite perspectives. the word "prefer" tells the story; to facilitate high load, you will need to do this. The key remains that backup systems are essentially passive- all the work have to occur from the sender end; If... -
JSeems so. One can build a backup system in any way - if it works (reliably, on the long run), it is probably fine :-)
-
Ffertig replied to the thread New Proxmox box w/ ZFS - R730xd w/ PERC H730 Mini in “HBA Mode” - BIG NO NO?.neither I filtered the last post (except the apt search) nor did I describe less than I did. On the contrary I logged all my steps exactly. The system is a newly installed proxmox cluster with CEPH. Yes I also have multipathed iscsi disks from...
-
G_gabriel reacted to RoCE-geek's post in the thread Redhat VirtIO developers would like to coordinate with Proxmox devs re: "[vioscsi] Reset to device ... system unresponsive" with Like.
But just the vioscsi (for SCSI) or viostor (for Block) INF downgrade is enough, there's no need for full virtio downgrade.
-
Falk R. replied to the thread MAM Attribute 800: Illegal Request.Was denn nun. Warnmeldungen oder Backup Abbruch? Warnungen kann man auch mal ignorieren, wenn man mit der Ursache klar kommt. Ein nicht funktionierendes Backup, bringt aber eine Errormeldung. -
RRoCE-geek replied to the thread Redhat VirtIO developers would like to coordinate with Proxmox devs re: "[vioscsi] Reset to device ... system unresponsive".But just the vioscsi (for SCSI) or viostor (for Block) INF downgrade is enough, there's no need for full virtio downgrade.
-
RRobRoye replied to the thread Installation Question - VM vs dedicated hardware?.I have it installed as a VM in the cluster and it is working perfectly. Has no issues with ay host, remote or local.
-
UdoB replied to the thread proxmox update download 70kb.Try to use IPv4 instead, at least for troubleshooting to exclude IPv6 has problems: Run this on a root shell: apt -o Acquire::ForceIPv4=true update && apt -o Acquire::ForceIPv4=true -d -y full-upgrade
-
RRoCE-geek replied to the thread Redhat VirtIO developers would like to coordinate with Proxmox devs re: "[vioscsi] Reset to device ... system unresponsive".0.1.271 is last OK, 0.1.285+ is buggy.
-
Falk R. replied to the thread Fehler: upload chunk to s3 backend - upload failed: unexpected status code 504 Gateway Timeout.Wenn du requests limitierst, brauchst du keine Bandbreite limitieren.
-
Falk R. replied to the thread Proxmox Backup Server mit S3.Warum ein extra vps? Ich synchronisiere jetzt schon eine Weile meine wichtigsten Daten auf S3 Buckets von Hetzner. Funktioniert bis jetzt problemlos.
-
Ccfgmgr reacted to bbgeek17's post in the thread Multipath configuration to Pure storage array (VLANS) with Like.
Sounds like something that would be perpetuated by a storage vendor who couldn't figure out how to build a good iSCSI stack and/or support an LACP bond :-) Blockbridge : Ultra low latency all-NVME shared storage for Proxmox -...
-
bbgeek17 replied to the thread Multipath configuration to Pure storage array (VLANS).Sounds like something that would be perpetuated by a storage vendor who couldn't figure out how to build a good iSCSI stack and/or support an LACP bond :-) Blockbridge : Ultra low latency all-NVME shared storage for Proxmox -... -
Bbitoo replied to the thread Cannot add PBS storage accessible via Cloudflare and Zero Trust.Have you managed to get it working? i have the same issue here, my second best alternative is opening a vpn between the two servers
-
Ccfgmgr replied to the thread Multipath configuration to Pure storage array (VLANS).I thought iSCSI and bonds were a "no-no" but I'd admit my knowledge could be a bit dated. I thought there could be troubles with link flapping etc.
-
Dddanh512 replied to the thread Redhat VirtIO developers would like to coordinate with Proxmox devs re: "[vioscsi] Reset to device ... system unresponsive".RoCE-geek @fweber Can you recommend for us the best version stable with Window Server 2016 and SQL Server 2017 running on, we running in production so afraid about the stability.