Latest activity
-
UdoB replied to the thread Question on PBS setup and hardware.Seems so. One can build a backup system in any way - if it works (reliably, on the long run), it is probably fine :-) -
Dddanh512 reacted to _gabriel's post in the thread Redhat VirtIO developers would like to coordinate with Proxmox devs re: "[vioscsi] Reset to device ... system unresponsive" with
Like.
seems not related to 285 drivers. downgrade to 271 for safety. Read previous posts Hangs / services crash can occur during backup if destination is too slow. FYI, initial bugs was after 208 and before 266 virtio drivers, fixed late 2024. -
IioB_Newcomer replied to the thread PBS als VM oder als LXC ?.Wie müsste ich da vorgehen ? Ich lege ein ZFS Storage in Host an ? Das reiche ich dann in den LXC ? Das ZFS mounte ich dann so, im LXC ?
-
-
bbgeek17 replied to the thread Multipath configuration to Pure storage array (VLANS).If this was my environment, I were limited in number of NICs that could be added to the host, and I was not looking to create a one-of-the-kind config, I would: - MLAG the network switches - configure LACP across the switches (either with MTU... -
Aalexskysilk replied to the thread New Proxmox box w/ ZFS - R730xd w/ PERC H730 Mini in “HBA Mode” - BIG NO NO?.try not to filter unnecessarily; what you want to see if there are PARTITIONS on those drives. lsblk output will tell. if you have partitions, its just a matter of a race condition which could be solved. if there arent- you're doing stuff beyond...
-
G_gabriel replied to the thread Redhat VirtIO developers would like to coordinate with Proxmox devs re: "[vioscsi] Reset to device ... system unresponsive".seems not related to 285 drivers. downgrade to 271 for safety. Read previous posts Hangs / services crash can occur during backup if destination is too slow. FYI, initial bugs was after 208 and before 266 virtio drivers, fixed late 2024.
-
GJa, die alte vm ist noch da. Werde die wieder aktivieren. Ich gebe Rückmeldung nach Umsetzung
-
GGMBauer reacted to news's post in the thread neuer PC - neue Installation - ständige Abstürze with Like.
Mal pauschal, weil laufend das gleiche gemeldet wird, ja nutze keinen der Mini PC. Punkt. Schau bitte einfach nach einem "gebrauchten" AMD Ryzen 5 5600x oder AMD Ryzen 7 5700x System mit SATA III und 32 GByte DDR4 Ram und es wird problemlos...
-
GGMBauer reacted to ThoSo's post in the thread neuer PC - neue Installation - ständige Abstürze with Like.
Da gibt es bestimmt auch ein typenschild bzw hersteller, evtl mal ein foto davon zwecks wiedererkennung. Ansonsten mal ein alternatives Linux nehmen und gegentesten, oder den guten Rat von @news folgen und das teil mit windows betreiben als...
-
Ccfgmgr replied to the thread Multipath configuration to Pure storage array (VLANS).nah vanilla RHEL host running Oracle. Fabulous performance. Dedicated interfaces for iSCSI. Agree on the L2/L3/L4 comment.
-
Ffertig replied to the thread New Proxmox box w/ ZFS - R730xd w/ PERC H730 Mini in “HBA Mode” - BIG NO NO?.ok log below: just for the protocol: I have 4 of these R730. All with the same hardware in it, all latest BIOS, latest Lifecycle/Drac, latest H330 Firmware, all in HBA Mode. 3 for Proxmox, 2 of them with this 600GB SAS 15k Dell drives. One with...
-
-
Ccfgmgr reacted to alexskysilk's post in the thread Multipath configuration to Pure storage array (VLANS) with Like.
Sure. the problem isnt with the networking per se; its that you're shoving 3 vlans into two nics, 2 of which really want their own interface. this would be very simply solved if you just added another interface (or 2) for non iscsi traffic. That...
-
Ppmd posted the thread 8.4 -> 9.1 update strategy with new SSD in Proxmox VE: Installation and configuration.Hello everyone and thanks for reading my thread. I'm a newby homelab user and dived head first Proxmox VE 8.4 about 10 months ago. Hardware is a refurbished Dell Oplitplex 5060 thin client with RAM upgraded to 8+16 GB. Everything running...
-
Ppaulc replied to the thread Licensing Question.I understand the subscription model. I think I am understanding the second paragraph. If I have three enterprise subscriptions. IF I add the PDM, I can update the connected systems through the enterprise update repository. However, if I add...
-
bbgeek17 replied to the thread How to use ISCSI for LXC storage.The storage content required for Containers is "rootdir". Not all supported storage pool types support all content types. For example, raw iSCSI storage (Block) does not support Snippets or ISO. The built-in iSCSI type also does not support...
-
Ppetwri replied to the thread [SOLVED] AMD GPU passthrough & reset hookscript that works through guest shutdowns.Just compiled the forked version, thanks for pointing this one out. Kernel module seems to be loaded, will test if this is actually working. Edit for quick update: without doing any troubleshooting at all, all I can say is that the vendor-reset...
-
Ppaulc reacted to narrateourale's post in the thread Installation Question - VM vs dedicated hardware? with Like.
VM should be absolutely fine.
-
Dddanh512 replied to the thread Redhat VirtIO developers would like to coordinate with Proxmox devs re: "[vioscsi] Reset to device ... system unresponsive".We running Window Server 2016 and SQL Server 2017 have two times auto stop Service SQL, need to restart the DB, can you describe the error you are experiencing for me? Any one facing the issues same with us, we are using virtio driver 0.1.285...
-
Ss4nguine posted the thread How to use ISCSI for LXC storage in Proxmox VE: Installation and configuration.Hello, I'm a bit confused when it comes to storage options for LXC containers. I want to move all of my disks to Truenas and migrate all disks there. In VM I can easily use ISCSI as backend storage, no issues here. But documentation on LXC...
-
Nnarrateourale replied to the thread Installation Question - VM vs dedicated hardware?.VM should be absolutely fine.
