Latest activity

What's new Featured content New posts New profile posts Latest activity
  • U
    uzumo replied to the thread Issues moving from NVIDIA RTX3080 GPU passthrough to AMD RX 9070 XT.
    On newly installed PVE8 or PVE9 systems, the amdgpu driver will likely be loaded at startup unless you take action. If your log is the latest one and you've removed amdgpu from the blacklist, yet this log persists, then I suspect the amdgpu...
  • J
    jt_telrite reacted to curruscanis's post in the thread TrueNAS Storage Plugin with Like Like.
    Here is the network interfaces on the proxmox server: I don't have anything specificly configured other than IP / info... VLANs are done at the switching level. root@bob:~# cat /etc/network/interfaces # network interface settings; autogenerated...
  • L
    LKo reacted to Chris's post in the thread [SOLVED] Super slow, timeout, and VM stuck while backing up, after updated to PVE 9.1.1 and PBS 4.0.20 with Like Like.
    The new Linux kernel version was part of the 4.1 release, the issue got unnoticed during the extended public testing phase as well as for the Proxmox VE 9.1 release a week earlier, which was released with the same kernel as well. Further, the...
  • M
    MatHeb reacted to chchia's post in the thread iGPU passthrough on Proxmox VE 9.1.1 – VM freezes on boot with Like Like.
    https://forum.proxmox.com/threads/another-solution-for-passthrough-intel-igpu.176959/ check this, and when you passthrough igpu, make sure your VM display set to none or it will hang.
  • M
    MatHeb reacted to cheiss's post in the thread iGPU passthrough on Proxmox VE 9.1.1 – VM freezes on boot with Like Like.
    Hi, did you check the journal/dmesg for any related messages? Have you checked that your IOMMU groups are properly set up (pvesh get /nodes/localhost/hardware/pci --pci-class-blacklist "")? Can you provide your complete VM configuration (qm...
  • bbgeek17
    bbgeek17 replied to the thread VDI mit Proxmox und Shared Storage.
    Ich bin sicher, dass es möglich sein wird, sobald Broadcom dem letzten Kunden den letzten Cent abgenommen hat und den VMFS-Code schließlich als Open Source freigibt. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox -...
  • J
    _--James--_ replied to the thread Proxmox Datacenter Manager 1.0 (stable).
    Ok so this is a volume based licensed product now. Anyone can run it in free mode, but the enterprise repo access is keyed to how many of your connected nodes are enterprise enabled. This is pretty amazing IMHO.
  • P
    Paulo de Moura replied to the thread VDI mit Proxmox und Shared Storage.
    Hallo Kollegen Besten Dank für Eure Tips. Ja, es ist etwas "hinderlich" dass Proxmox, wie auch andere Hypervisors, kein shared filesystemformat wie vmware mit ihrem "vmfs" beherschen. das bremst einige Installationen aus, da lange nicht alle...
  • S
    stncttr908 reacted to Johannes S's post in the thread Proxmox Datacenter Manager 1.0 (stable) with Like Like.
    Great work :) One thing which bothers me: I'm missing documentation on best practices for security and permissions I need to give the API tokens used for the PVE and PBS remotes. Let's say I'm running the datacenter manager and have full admin...
  • S
    stncttr908 reacted to t.lamprecht's post in the thread Proxmox Datacenter Manager 1.0 (stable) with Like Like.
    We're very excited to present the first stable release of our new Proxmox Datacenter Manager! Proxmox Datacenter Manager is an open-source, centralized management solution to oversee and manage multiple, independent Proxmox-based environments...
  • A
    alexskysilk replied to the thread Temperature.
    Firstly- no one wonders this. And apart from that blanket statement I had no idea such a dislike existed. More to the point, it takes two to tango. the original comment wasnt pointed at you and required no reply. the PVE interface isnt/was never...
  • Z
    zacthedev replied to the thread Issues moving from NVIDIA RTX3080 GPU passthrough to AMD RX 9070 XT.
    Yes this is how it worked with multiple nvidia GPU's that have passed through this machine except the display would change to the guest os, with the AMD GPU the display remains on with the host dialogue and frozen cursor. Output is attached...
  • D
    deebsr posted the thread Updated to 1.0 from 0.9.4 Beta - remotes get API error in Datacenter Manager: Installation and configuration.
    Just updated my lab to 1.0 version from the 0.9.4 version. I get the following error message when I try to access the remotes: api error (status = 400: Could not establish a TLS connection. Check whether the fingerprint matches or the...
  • N
    nashu2k replied to the thread Temperature.
    I do agree not everything is SMART enough to be properly shown well, it's not about dumbing down here; it's finding the decent solution for a quite decent issue - and (for example) I know unRAID is paid but they managed to do it in a very user...
  • U
    uzumo reacted to Johannes S's post in the thread Temperature with Like Like.
    The trouble is that you can't have a "fits everything" solution. If you read more of the previous debates on this subject you would also encounter the (imho) most cruical counter-againt against such an feature: On a modern server you can easily...
  • U
    uzumo reacted to gfngfn256's post in the thread Temperature with Like Like.
    That is better than repugnant coffee from a newbie. How dare you insult another member - for absolutely no reason! LnxBil has definitely earned his more than "Distinguished Member" status numerous times. He has helped dozens (if not hundreds) of...
  • U
    uzumo reacted to chchia's post in the thread iGPU passthrough on Proxmox VE 9.1.1 – VM freezes on boot with Like Like.
    https://forum.proxmox.com/threads/another-solution-for-passthrough-intel-igpu.176959/ check this, and when you passthrough igpu, make sure your VM display set to none or it will hang.
  • U
    uzumo reacted to Johannes S's post in the thread Temperature with Like Like.
    And for the smart table we already have the problem that it's not working for every device due to the way the manufactures use it. For example on two of my used micron server-ssds the wearout indicator reads n/a due to it being some propietary...
  • N
    nashu2k reacted to Johannes S's post in the thread Temperature with Like Like.
    And for the smart table we already have the problem that it's not working for every device due to the way the manufactures use it. For example on two of my used micron server-ssds the wearout indicator reads n/a due to it being some propietary...
  • U
    uzumo replied to the thread Issues moving from NVIDIA RTX3080 GPU passthrough to AMD RX 9070 XT.
    Since it's pass-through, it's normal for the console to disappear once the virtual machine starts up. Please provide the results of running `lspci -vvvs 0000:0c:00.0` and dmesg -e after rebooting. * Save it as a text file and attach it as a...
Show older items
Top Bottom
Back