Latest activity
-
Ddmpm posted the thread Frigate LXC using 7GB in /var/lib/lxc in Proxmox VE: Installation and configuration.I noticed that my server was using a lot more space on local than my Dad's server, and I tracked it down to my Frigate LXC, which isn't currently running but is no. 119, which has created over 7GB of files /var/lib/lxc/119. Every other LXC only...
-
SSteveITS replied to the thread Wrong number of cpu cores inside VM.If you changed that (hardware settings) you need to power off the VM for them to apply.
-
Aarghdubya replied to the thread Proxmox Web GUI stuck at loading and unable to apt update.It could be you have some basic network issues with the NIC/cable/switch do pings to your local gateway and to the machine you are trying to get to the admin pages from. if you can change the speed of it's switch port to 100 duplex or half-duplex...
-
Cchey replied to the thread [SOLVED] Proxmox Update to 9.1.1 from 8.0 / VMs (Homeassistant) not starting.Hi, attached the pictures of the "boot loop" and the outputs of the commands. No errors in the bottom panel... Nor any error messages in the console- just the rebooting.
-
-
Aarghdubya replied to the thread [SOLVED] Proxmox Update to 9.1.1 from 8.0 / VMs (Homeassistant) not starting.Sounds like the drive referenced in the VM definition has changed or is somehow unavailable. Or boot order changed (a restore to a new VM could just put the same settings back in there). could be more basic than you think also look for warnings...
-
Cchey posted the thread [SOLVED] Proxmox Update to 9.1.1 from 8.0 / VMs (Homeassistant) not starting in Proxmox VE (Deutsch/German).Hi community, i just updated the proxmox VE to latest 9.1.1. Since then my VM, which includes my homeassistant OS, is not starting anymore. I got stuck in grub (all slots and rescue shells resulting in crash/restart of VM). I have backups from...
-
Aarghdubya replied to the thread upgrade from 8.4.11 to 9.0.5 failes.2 of 3 upgrades from 8.4.14 to 9.1.1 had the Processing triggers for shim-signed:amd64 (1.47+pmx1+15.8-1+pmx1) ... Can't locate AptPkg/Config.pm in @INC (you may need to install the AptPkg::Config module) (@INC contains: /etc/perl...
-
Lluckman212 replied to the thread Suppress repeating system log message.I have these too. Is there any way to stop them from even reaching the journalctl log? They are filling up my Proxmox GUI log screen...
-
Ttherokh replied to the thread Snapshots as Volume-Chain Creates Large Snapshot Volumes.For further testing, we tried with the saferemove option on, and the same problem occurs with the timeout after discards. zero-out data on image vm-102-disk-0.qcow2 (/dev/san_test/del-vm-102-disk-0.qcow2) reduce stepsize to the maximum...
-
Ddw-cj replied to the thread Backup jobs hang on 4.0.18 S3 storage.I have now updated this PBS node to 4.1.0. Since my last post (around November 4, about 3 weeks ago) I had GC disabled on this datastore. Today I re-enabled it and started GC manually. Environment: - Proxmox Backup Server 4.1.0 - Debian 12 -...
-
Ttherokh replied to the thread Snapshots as Volume-Chain Creates Large Snapshot Volumes.Thanks Fabian. Is there a way to increase the timeout? For our use case it may be fine to accept that we cannot make other VG changes while a snapshot is being removed. The 1TB snapshot lvremove above takes 1m30.654s.
-
TWe're pleased to announce the release of Proxmox Backup Server 4.1. This version is based on Debian 13.2 (“Trixie”), uses Linux kernel 6.17.2-1 as the new stable default, and comes with ZFS 2.3.4 for reliable, enterprise-grade storage and...
-
Ff1shboll replied to the thread Proxmox Web GUI stuck at loading and unable to apt update.Any help please?
-
G_gabriel reacted to RoCE-geek's post in the thread High VM-EXIT and Host CPU usage on idle with Windows Server 2025 with
Like.
As a last resort, I decided to patch /usr/share/perl5/PVE/QemuServer/CPUConfig.pm And it seems... after some experiments, maybe I can say I've found some workaround, which may help somehow. But I'm sorry, as it's too late, so briefly... -
DDerekG posted the thread kernel: landlock - Error on VM boot - assistance required in Proxmox VE: Installation and configuration.Hi all, I have Proxmox 9.1.1 which was fully operational until I made 2 changes at the same time and am unsure why a single VM (out of 9 VM's/CT's) fails to complete the boot process. The 1st change was hardware replacement, and as it's deep...
-
NN3xus8 posted the thread Wrong number of cpu cores inside VM in Proxmox VE: Installation and configuration.With Proxmox(8.4.14) I have a VM with Rocky Linux 9 installed: I've specified Processors 4(1 socket, 4 cores) [x86-64-v3] [numa=1] BIOS: OVMF(UEFI) Machine = q35 viommu=intel(with/without) When I check inside the VM I only see 1 core: I run...
-
JJohannes S reacted to stv.Bundesadmin's post in the thread Proxmox Backup Server 4.1 released! with Like.
Just upgraded from 3.4 to 4.1 and used the new Datastore->Options->"Tuning options" to improve verify speed (changed from 1/4 to 16/32 as a quick test). Great success ;-) PBS 3.4: ~1 GB/s PBS 4.1: ~6-7 GB/s
-
JJohannes S reacted to t.lamprecht's post in the thread Proxmox Backup Server 4.1 released! with Like.
We're pleased to announce the release of Proxmox Backup Server 4.1. This version is based on Debian 13.2 (“Trixie”), uses Linux kernel 6.17.2-1 as the new stable default, and comes with ZFS 2.3.4 for reliable, enterprise-grade storage and...
-
JJohannes S reacted to t.lamprecht's post in the thread Proxmox Backup Server 4.1 released! with Like.
Siehe https://forum.proxmox.com/threads/proxmox-backup-server-4-1-released.176867/
-
JJohannes S reacted to fl0moto's post in the thread proxmox-offline-mirror - No option for Proxmox VE Trixie or Ceph Squid? with Like.
As stated before, you can either upgrade the system running POM to Trixie and it'll be available in the setup, or edit the config manually to something like this: $ cat /etc/proxmox-offline-mirror.cfg mirror: debian-bookworm-main...
