Latest activity
-
fba replied to the thread Cloud init drives change to cdrom drive.The screenshot of the error is of VM 102. The screenshots with the configuration are from VM 104 and VM 108. Would you like to share the configuration of VM 102, too? -
Xxenon96 reacted to t.lamprecht's post in the thread Opt-in Linux 6.17 Kernel for Proxmox VE 9 available on test & no-subscription with
Like.
We recently uploaded the 6.17 kernel to our repositories. The current default kernel for the Proxmox VE 9 series is still 6.14, but 6.17 is now an option. We plan to use the 6.17 kernel as the new default for the Proxmox VE 9.1 release later in... -
Bbl1mp replied to the thread Reference Enterprise Architecture.Well from my perspective, that is the burden and advantage of Open Source. There is no necessity to limit the list of possible solutions and divide them in "right" or "wrong" implementations. The question is what is the problem to solve and is it...
-
Bbpcyberoptic replied to the thread [SOLVED] Unable to Complete Step 1: Downloading.I used a different ISP and it worked. I was unsuccessful with Spectrum Internet, but Verizon Fios came in clutch. Spectrum Sucks!
-
Ffpausp replied to the thread Speicherbedarf einzelner VMs im Storage darstellen?.Danke! Hab in der Zwischenzeit ein geniales Tool gefunden: Pulse, bin schon am testen...
-
OOnslow reacted to UltrawideBread's post in the thread [SOLVED] Unable to pass-through whole NIC with Like.
Okay! It works now, but only with OVMF (UEFI), which is fine. When I tried it first time i did not realized it was not hanging on the same screen but on the boot selection. I just gave it another try and the boot issue can be solved by un-ticking...
-
Rreinob reacted to fabian's post in the thread Is there a way to install a 6.16 or 6.17 kernel on proxmox? with Like.
I would not recommend building/installing a kernel with random apparmor patching that you don't fully understand and trust.
-
MmrEckendonk posted the thread Hetzner 2 Public IPs - Additional IP not working in Proxmox VE: Networking and Firewall.Hello, This hetzner machine is driving me nuts for over the last 2 weeks, spend many hours to get the network to work. 1 IP is for the Proxmox UI 1 IP for the VM/NAT 2 IPv6 for some other I already added support from hetzner, they told the...
-
UUltrawideBread replied to the thread [SOLVED] Unable to pass-through whole NIC.Okay! It works now, but only with OVMF (UEFI), which is fine. When I tried it first time i did not realized it was not hanging on the same screen but on the boot selection. I just gave it another try and the boot issue can be solved by un-ticking...
-
Ccomputergeek125 posted the thread VLAN SDN with mixed-MTU networks in Proxmox VE: Networking and Firewall.On my system, I have a 3-node HCI PVE cluster with Ceph storage and a SDN VLAN zone with about 21 VNETs copied from the previous system's VMware vDS. So far, all of this has worked out for me for almost a year. Currently, my version is on...
-
I would guess, with 3/2 replication, at some point while rebalancing it ends up with 4 copies (better to have an extra than not enough), and eventually removes one to get back to 3. -
The DB/WAL are both things you CAN put in other disks, only recommended if those disks are significantly faster than your disk. Eg. NVRAM for NVMe or NVMe/SAS SSD for spinning disks. You can read up on exactly what they do, but the WAL is...
-
OMG. My test VM was not optimized for Virtio. I built another VM and retested. Now it looks so much better that I doubt the results. This is much better than the old VSAN cluster delivered. Atto. Default test. Atto. Write cache disabled...
-
KKatrinaD replied to the thread [EDIT: Mellanox NIC not working] VMs not connecting after change to vmbr0.Thanks for your help, @readyspace After getting a compatible SFP+ module (HPE 455883-B21) for the 10GbE NIC, it still shows no carrier/down. I rebooted host and swapped patch cables to be sure. No change. After spending a bunch of time trying...
-
Rrude100 replied to the thread PMG 9 Mobile Login for Quarentaine dosent work goes to pmg login.I use LDAP for my users I do not get an eror just the wrong login sreen (PMG) Second atached jurnal and log will come later
-
news replied to the thread Installation with separate partitions for ZFS log and cache.i run a small ZFS Pool rpool and a vdev zfs mirror on SSDs with 1 TB size. eg. 250 GB on partiton 3. So partiton 1-3 will be used. With 2x HDDs i build a ZFS Pool dpool as vdev zfs mirror. Next with 2x partiton 4 on SSDs, so i can add to dpool a... -
Stoiko Ivanov replied to the thread PMG 9 Mobile Login for Quarentaine dosent work goes to pmg login.Do you use an LDAP login for your users to log into the quarantine? If you don't switch the user agent (I assume select "use Desktop version" on the mobile site) - what error do you get?! Which errors do you get - please share the journal and... -
Bbl1mp replied to the thread DR Options Using Proxmox.Hi Tacioandrade, if you look for solution involving PVE Clusters with ceph enabled. Maybe a snapshot based ceph mirror could be an option. https://pve.proxmox.com/wiki/Ceph_RBD_Mirroring We are testing the journal based mirror for the customer...
-
UdoB reacted to Blonov's post in the thread add public host key to authorized_keys is not working with Like.
I added mine to /root/.ssh/authorized_keys. Phil -
UdoB replied to the thread Reference Enterprise Architecture.Maybe you could ask them via https://shop.proxmox.com/contact.php ? That's what I would do with such a large system to plan...