merci pour le retour.
ce n'est pas une question de bios.
1 To sera toujours égal à 931 Gio.
Les constructeurs ont toujours compté l'espace de stockage en base décimale, 1000 octets = 1 Ko
Alors que les données sont décomptées en base binaire où...
Hi, thanks for answering.
Your question about accesses put me on the right track, and I found an API call every 10 seconds from an application I use to monitor my Proxmox hosts. Since I have three nodes, the application assumes they're a cluster...
If they were important you would have multiple backups.
Unfortunately @BD-Nets might be right.
The problem with recovery from the other disks is that it depends heavily on the used filesystem. Which type did you use? LVM? LVM-thin? ZFS...
[Solved] ASUS NUC14RVHU5 + Proxmox: I226-V LAN dead only when an NVMe drive is installed
Found the fix: my ASUS NUC14RVHU5 (NUC 14 Pro) had the integrated Intel I226-V detected by Linux (igc), link “up”, but no traffic at all whenever an NVMe...
Yes, more precisely the Linux kernel does that, PVE is not involved in this. It also works in VMs. Just add a disk or resize an existing one and it'll immediately recognizes it.
Your disk enclosure might support it, yet sata controllers often...
Found reddit thread about this, monitoring using htop:
#configure htop display for CPU stats
htop
(hit f2)
Display options > enable detailed CPU Time (system/IO-Wait/Hard-IRQ/Soft-IRQ/Steal/Guest)
select Screens -> main
available columns >...
When I started my journey with Proxmox, I installed it on an SSD with separate partitions for ZFS cache and log,
because a guide (https://forum.level1techs.com/t/proxmox-zfs-with-ssd-caching-setup-guide/97663) said it would be faster.
Now, after...
I'll try to be a little more clear
a user suspects an email has gone to spam from his mobile goes xx to https://aa.bb.dk:8006/quarantine
Since it is from mobile, the user agent is standard for mobile. You get PMG login. If you switch the mobile...
Hello, unfortunatly was not able to solve the issues by reading. So any help is highly appreciated. My server isn't going into higher C-States, thus power consumption is rather high. With VMs running I sit in the 30-35W region, while with just...
J'ai trouvé ma solution, j'ai remplacé les disque par une taille supérieure 300 > 450 Go.
les disques de 300 Go on une taille utile de 278Go, et les disques de 450Go on une taille de 418Go. je n'ai pas trouvé dans le bios pour pouvoir utiliser...
Hi @Onslow, thanks for reply. I followed the docs, but still no luck. Steps below for reference (maybe someone spots a mistake?)
- Modules loaded
lsmod | grep vfio
- Device IDs
lspci -nn | grep -i Chelsio
- So i took these four from the end...
Meine Empfehlung definitiv eine Firewall davor setzen sowas wie pfSense/OPNsense oder vergleichbar mit dem du dich auskennst. Übrigens deine anfrage hört sich so an, als wenn du so gut wie keine Linux Kenntnisse hast. Dann ist es keine gute Idee...
Bitte bitte keine Lern oder Spielwiese ins Internet. Spiele und lerne zu Hause. Was Du machst ist wirklich sehr gefährlich für Dich und andere. Danke für Dein Verständnis
I think you're trying to do this a too low-level. Why not make a backup of the VM with native proxmox tools, and restore it?
Barring that, you could backup in-vm to somewhere, recreate the thin disk / volume on another host, and in-vm restore...
Naja, Einstiegsprobleme können vielfältig sein - nicht nur PVE spezifisch. Und das schließt durchaus "bedienen von XenForo" mit ein.
Und "viel Arbeit" machen wir uns doch nur, wenn es uns gerade "in den Kram" passt... ;-)
Warum machen WIR uns eigentlich so viel arbeit und vermuten Probleme die jemand haben könnte mit der passenden Lösung ?
Er braucht Hilfe, dann kann man das auch richtig formulieren.
Wahrscheinlich kreutzt der Initator nie wieder auf.
Die Bitte um...
Naja, damit wir irgendetwas sagen können, was dir helfen könnte, brauchen wir etwas mehr Informationen.
Reine Vermutung: du hast PVE Version 9 auf irgendeinem Rechner installiert und irgendein anderer Rechner kann dessen Webinterface nicht...
Als erste könntest du mal genau sagen wohin du willst, bzw was zu dem fehler führt.
Wir sind hier in einem forum, wo man sich in klar verständlicher Sprache verständigt und keine KI.
Danke.