Latest activity
-
LLkS45 posted the thread Server rebooting when update packages in Proxmox VE: Installation and configuration.Hey guys! Take a look please with this situation: And the server just reboots... No any erros, just reboot! Any ideas? Thank you.
-
-
Jjacksonwashere replied to the thread Persistent VM instability with Ryzen 9 9950X3D and Proxmox 8/9.I ended up pinning my kernel to proxmox-kernel-6.8.12-13-pve-signed and I have had no issues since.
-
Ssnakeoilos replied to the thread Upgrading from Proxmox 8 to 9 issue: GRUB error: out of memory.Sorry, I don't have a proper context. What do i need to do here? Boot the problematic machine with these OSes and see if they boot, or do i have to physically install the oS? This machine is on live production and i can only do quick checks on...
-
JWell I got myself in a situation. I have been running Proxmox on a single 500GB HDD for years. That's everything (OS, VM's...). It's worked fine, but is too small. I just picked up a Poweredge R720XD for free as an upgrade and am finally dealing...
-
Bbasti123 posted the thread Promox startet nicht mehr nach Update auf Version 9 in Proxmox VE (Deutsch/German).Hallo zusammen, ich habe heute das Update von Promox 8 auf 9 durchgeführt. Leider startet das System jetzt nicht mehr. Der Server bleibt im BIOS hängen. Die Festplatte wird im BIOS auch erkannt,aber auch manuell aufwählen bringt nichts. Bevor...
-
Nnarrateourale replied to the thread How to improve RDP user experience (Proxmox + Ceph NVMe + Mellanox fabric).Disable any power saving features / c-states and/or switch the BIOS to a high-performance/virtualization pre-set. 10/40 Gbit can be a bottleneck if used with fast flash storage! Especially if it shares the physical network with other services...
-
Jjimmycav posted the thread Cloud init drives change to cdrom drive in Proxmox VE: Installation and configuration.I use terraform to provision my VMs, and each is created with a cloudinit drive (cloudinit.png). They are each replicated to other nodes for HA. At some point during the life of the VM the cloudinit drives seem to change to cdrom drives in the...
-
-
MMustard6909 reacted to TheHellSite's post in the thread [TUTORIAL] Tutorial: Unprivileged LXCs - Mount CIFS shares with
Like.
Since unprivileged LXCs are not allowed to mount CIFS shares and priviliged LXCs are considered unsafe (for a reason) I was scraping my head around how to still have my NAS shares available in my LXCs, f.e. (Jellyfin, Plex, ...). The solution... -
PI had the same issue and it was fixed by not logging in as root but creating a new user then log in, then log out and re log in as root
-
FHallo, ich habe ein komisches Verhalten bei meiner Proxmox Installation. Nach der Installation lief alles normal. Nach einigen Tagen hat der PC kein Netwerk mehr. Egal was ich versucht habe er will nicht mehr am Netzwerk teilnehmen. Seitdem ist...
-
OOnslow reacted to defi00's post in the thread [SOLVED] clone vm fails - beginner problem? with Like.
Thanks Onslow. I finally got it up and running as expected. The problem was that I did not properly set up the disks and so my changes were never made persistent. With the command "df -h" I could have seen that the non-cloneable VM used only a...
-
Sshadow wizard replied to the thread Restoring a VM causes whole system to slow to a halt.The problem with that solution is basically you are saying "Try this and see if it shuts down all your VM's that run your stuff for 30-45 min." I am sure you can understand that isn't practical/desirable. Unless I am misunderstanding, and those...
-
Sseeyahlater replied to the thread Ceph OSD on LVM logical volume..Hey - I'm currently migrating my vms from an old PowerEdge R610 to new mini PCs (3 of them). I have performed this migration and the vms are now on the mini-pcs, with the PowerEdge running the last little bits of infrastructure. When installing...
-
DI would like to create a cluster of three nodes with Ceph installed on both. I would like to avoid using two switches because I don't need them, as the nodes are close to each other and are equipped with multiple 2.5GB network cards. I was...
-
-
Ddefi00 replied to the thread [SOLVED] clone vm fails - beginner problem?.Thanks Onslow. I finally got it up and running as expected. The problem was that I did not properly set up the disks and so my changes were never made persistent. With the command "df -h" I could have seen that the non-cloneable VM used only a...
-
DDomino replied to the thread How to improve RDP user experience (Proxmox + Ceph NVMe + Mellanox fabric).I'm not sure if this applies to you, but it sounds like a commercial scenario? In which case I would highly recommend you take out the full license cover with Proxmox. As I understand it they have inhouse skills specializing in migrations from...
-
SInisterPisces reacted to fiona's post in the thread Proxmox Virtual Environment 9.0 released! with Like.
Hi, Then report the issue to Google please and not here ;) And I suggest you read up more on what LLMs can and cannot do and not just trust marketing hype. -
SInisterPisces reacted to ness1602's post in the thread Proxmox Virtual Environment 9.0 released! with Like.
I don't get why you need LLM to check sha.
-
KKingneutron replied to the thread How can a LVM thin volume be saved to a sparse file and then restored as a thin volume without making it "thick" ?.I think you're trying to do this a too low-level. Why not make a backup of the VM with native proxmox tools, and restore it? Barring that, you could backup in-vm to somewhere, recreate the thin disk / volume on another host, and in-vm restore...
-
Rrude100 posted the thread PMG 9 Mobile Login for Quarentaine dosent work goes to pmg login in Mail Gateway: Installation and configuration.When you want to log in to Quarentaine from a mobile phone, you will be greeted with PMG login in version 901 and not Mobile login as in 825, and it will therefore fail if you click the token link in the email.
-
