Latest activity
-
OOnslow replied to the thread backup VMs and Containers on "offline" node./etc/pve is mounted by pve-cluster service. The real data is in /var/lib/pve-cluster/config.db which is an sqlite database. (Quoting https://forum.proxmox.com/threads/this-is-bad-etc-pve-is-missing-on-boot.127059/post-555167 ). "If you have...
-
Wwaltar replied to the thread Recommendations for Dell R7715 Hardware selection / controller question.Nvme's could be get pcie direct connected without a perc and even in a R7715. PS: H965i is last generation pcie gen4 and H975i new pcie gen5 raid controller but in a config there is only nvme backplanes cpu direct connections or by perc between...
-
PPotatoSalad reacted to jfpayeur's post in the thread [SOLVED] Faster failover - possible? with
Like.
Is there anything new on this mater, or on the roadMap ? I mean, with a dedicated corosync network and Pings in the ~0.2ms range -->0.0002sec ! There Must be a way to "declare" a node missing in action faster that 60secs ? Thanks ! -
MMoin, ich bin zufriedener Nutzer vom Proxmox Mail Gateway nach einem Spam Bomb angriff. Nun hab ich allerdings festgestellt, dass die daily Statistiken irgendwie nicht mit der Anzahl der Mails passen. Wenn ich im Tracking Center mir alle...
-
-
Ggridiron replied to the thread Tailscale on PVE host.I don't use Tailscale myself, but it could potentially be as simple as using Tailscale to connect to the LXC guest, then accessing the PVE web UI via its usual IP and port (assuming you don't have any firewall restrictions in place).
-
Ddespens replied to the thread Tailscale on PVE host.Thanks for the hint gridiron, that makes sense...! I was only able to find instructions on how to install tailscale inside LXC containers to be used within these containers, but none on how to connect that to the host system. Do you maybe know...
-
JJohannes S reacted to mr44er's post in the thread Server Upgrade - Unterstützung/Beratung bei Auswahl der Hardware with Like.
Das ist auch die Bestätigung, dass die 3.0er x8 Anbindung völlig ausreicht. :) Ich weiß nicht, wie sich das aktuell mit den gehackten nvidia-Treibern bei consumer-Karten verhält bzw. ob du das überhaupt einsetzen können wolltest. Ich glaube...
-
JJohannes S reacted to crally's post in the thread Server Upgrade - Unterstützung/Beratung bei Auswahl der Hardware with Like.
So jetzt also nochmals ein mega DANKE! Es läuft nun alles!!! :p Kurzer erster check ergab: im Idle verbraucht die karte laut "nvtop" nur 4W. Die Strommessung am Server ergab jedoch ca. 10-15W Anstieg zu vorher. Damit bin ich aber absolut...
-
JJohannes S replied to the thread Sync causing problem in our wan.Sorry, I missed that line about the set limitation. I have honestly no idea how to proceed, but I would try to limit the bandwith for the sync job even more to an absurd low amount just to test whether this change anything. I would expect that...
-
UUser8080 posted the thread PBS 4.0.15 – Retention (keep-daily/keep-monthly) not pruning expected snapshots? (real case with output) in Proxmox Backup: Installation and configuration.Hi all, I’m looking for confirmation/guidance on Proxmox Backup Server retention behavior. I’ve read the docs, but in my tests the results don’t match expectations, and I’d like to understand whether I’m misreading the rules or there’s something...
-
It would probably be better to install Tailscale into a VM or LXC and access the PVE host via that guest. -
GGMBauer replied to the thread Netzwerk Probleme: Ist es die Fritzbox oder Proxmox.Du weißt jetzt zwar, wie du dein Netz besser konfigurierst, aber das Grundproblem ist noch nicht gelöst. Wenn du uns verrätst, welchen NUC du benutzt - oder noch besser, gleich welche Netzwerkkarte der hat - dann können wir auch dazu einen...
-
Ccelemine1gig replied to the thread Force PCIe port downgrade at boot (or solve AER errors).You could also have a power problem with those adapter cables. Remember, that a card can draw upto 75W from the slot. Which in this case is your cable adapter. So make sure it gets enough external power and maybe add an extra cap or two for more...
-
Yyunmkfed replied to the thread Proxmox hangs after upgrade to v9.Thanks. I'll wait for other inputs before making changes.
-
Ssbraz replied to the thread [SOLVED] Proxmox VE 8 to 9 on OVH bare metal servers.FYI, starting on 2025-11-12, all new Proxmox VE 9 and Debian 13 installations started from the OVHcloud control panel will have one ESP over RAID1. This only applies to UEFI boot servers with multiple installation disks. The related status task...
-
SDanke für die schnelle Antwort, ich hab es genau wie beschrieben durchgeführt auf der einer node und die andere einfach Plattgemacht. Hat super Funktioniert :) Kleines Doku für Leute die zu Faul sind das Englische zu Übersetzen: 1. Stoppen der...
-
gurubert replied to the thread Datacenter und/oder Cluster mit local storage only.Ich kenne das Problem nur von OCFS2. -
OOnslow replied to the thread Proxmox hangs after upgrade to v9.Split locks are discussed e.g. here: https://pve.proxmox.com/wiki/Split_lock_detection ||| https://forum.proxmox.com/threads/x86-split-lock-detection-log-entries-after-reboot.143863/ |||...
-
Jjmarino replied to the thread Unable to upload ISO image.thanks, resolve the issue for me too.
-
JNginx proxy manger user here - same issue stuck on 2.26 GB/ 51% when uploading ISO, never had the issue before. Smoochi and Prooxmx comment made me thing proxy manager. Added the following to Advanced settings client_max_body_size 0...
