Latest activity
-
Llogblackcat replied to the thread Everything seems to be working fine (all testing done and troubleshooting listed) and yet the GUI is not working!.https:192.168.100.245:8006 does not open the proxmox web GUI, runs out of time
-
bbgeek17 replied to the thread Everything seems to be working fine (all testing done and troubleshooting listed) and yet the GUI is not working!.and yet the GUI is not working! What exactly does this ^ mean? Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox -
bbgeek17 replied to the thread Proxmox cluster.It seems that pve4 and pve5 are not aware of pve6. Follow the guide to clear the cluster configuration/files on pve6, reboot it, then try to rejoin. Carefully record all steps and their output. I recommend doing the join from CLI to ease the data...
-
Llogblackcat posted the thread Everything seems to be working fine (all testing done and troubleshooting listed) and yet the GUI is not working! in Proxmox VE: Installation and configuration.1- yes the ip is within dhcp range adresses (from 168.1 to 168.240 is taken so i've got above to pick) 2- cat 3- ip a 4-systemctl status 5- yes https instead of http in browser 6- i can ping the dns , can ping local gateway. can ping my...
-
-
Aaufwiz replied to the thread Ceph 19.2.1 2 OSD(s) experiencing slow operations in BlueStore.It is helpful for me.
-
Aaufwiz reacted to SteveITS's post in the thread Ceph 19.2.1 2 OSD(s) experiencing slow operations in BlueStore with
Like.
I don't think we've seen this alert for a few weeks now. FWIW I saw this post, but did not change any of our (19.2.1) settings... -
Ggja replied to the thread Strange behavior with backup mail notifications.I'm having this problem, too. I just requested access to Debian's GitLab. I'm submitting a patch to fix `ssmtp `to ignore `-B`.
-
WWeirdGoesPro replied to the thread GPU Passthrough For Windows 11 Not Working (kvm: vfio: Unable to power on device, stuck in D3).lspci revealed the following: If I'm reading that right, it looks like vfio-pci is being used for the GPU. Grub and initram have been updated any time a change was made to those files, and a reboot was done each time. I've removed the rom entry...
-
LnxBil replied to the thread Proxmox VNC clipboard sharing not working?.Sorry to ressurect this thread, but can you (@MarkusF) explain why enabling the clipboard breaks live migration and why this is not expliticly (also) stated in the reference documentation? I know it is now stated on the clipboard activation... -
Tthe1corrupted replied to the thread GPU Passthrough For Windows 11 Not Working (kvm: vfio: Unable to power on device, stuck in D3).Can you verify the VFIO driver is loading for the GPU? Run lspci -nnk and make sure that vfio-pci is the driver being used on the host. The error is reporting the device is stuck in a D3 state which you have disabled. Update grub, initram and...
-
WWeirdGoesPro posted the thread GPU Passthrough For Windows 11 Not Working (kvm: vfio: Unable to power on device, stuck in D3) in Proxmox VE: Installation and configuration.I am having issues passing through my new GPU to my Windows 11 VM. I previously had another AMD GPU hooked up to this same VM without issue. The new 9070 GPU will display the Proxmox terminal just fine, so I’m relatively sure there is no defect...
-
Ddmpm posted the thread Need to clone Proxmox install from unencrypted drive to drive with encrypted partition 3 in Proxmox VE: Installation and configuration.Because the Proxmox installer doesn't allow for installing on an encrypted partition, we have to do a normal install and then copy it across to the encrypted drive, as explained here...
-
JOn our proxmox we're doing a bit of async routing, problem is that with the datacenter firewall enabled, the traffic is blocked at the bridge, if disabled it works as it should. Problem is that this seems to be the invalid rule in the forward...
-
KKingneutron replied to the thread [SOLVED] trying pve upgrade and getting compressed data is corrupt for proxmox-kernel-6.8.12-11-pve-signed.Run a RAM test, Memtest86+ at least 1 pass
-
JJohannes S reacted to t.lamprecht's post in the thread Kann keine NFS-Verbindung herstellen with Like.
Mag sein, dass die Kombination für dich unlogisch wirkt und es vielleicht auch nicht die beste Variante ist. Ich habe mir den Thread nicht genau aus technischer Sicht angeschaut. Aber dein Beitrag wurde gemeldet und es ist auf jeden Fall auch...
-
JAlles, was er umsetzen will, kann er OHNE proxmox machen nur mit OMV.
-
JDo you really believe this is a good idea???
-
JJohannes S reacted to t.lamprecht's post in the thread How to remove subscription widget ? with Like.
You can do so by getting a subscription: https://www.proxmox.com/en/proxmox-ve/pricing It won't show an error if you get a subscription. It's fine if you won't get any, but then you have to live with the few small reminders in the UI. Note...
-
JJohannes S reacted to _gabriel's post in the thread Best practice for using 2 SSDs with a PBS VM or LXC with Like.
An easier faster not recommended way is install directly alongside PVE https://pbs.proxmox.com/docs/installation.html#install-proxmox-backup-server-on-proxmox-ve
-
G_gabriel replied to the thread Best practice for using 2 SSDs with a PBS VM or LXC.An easier faster not recommended way is install directly alongside PVE https://pbs.proxmox.com/docs/installation.html#install-proxmox-backup-server-on-proxmox-ve
