I have two nodes and one NAS
I am running ZFS over iSCSI
NAS has 3 NICS 2 10Gbit and one 1GBit
10Gbit connections are DAC without router.
So NAS has two Portal IPs since each nodes 10Gbit connection is on its own Subnet.
This makes me not being able to create a shared. But i cant have them as individual storages either going to the same....
Can anyone advice me...
Setup (Dont worry about no carrier they have connection...now...)
NOD 2
2: ens2f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
altname enp97s0f0
inet 10.10.100.12/24 scope global ens2f0
valid_lft forever preferred_lft forever
NOD 1 (BAJS)
2: ens2f0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
altname enp97s0f0
inet 10.10.200.12/24 scope global ens2f0
valid_lft forever preferred_lft forever
NAS
ixl0: flags=8863<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
description: Storage 10gb node 2
options=4e507bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6,NOMAP>
ether x
inet 10.10.100.11 netmask 0xffffff00 broadcast 10.10.100.255
media: Ethernet autoselect (10Gbase-Twinax <full-duplex>)
status: active
nd6 options=9<PERFORMNUD,IFDISABLED>
ixl1: flags=8863<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
description: 10gbit node 1
options=4e507bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6,NOMAP>
ether x
inet 10.10.200.11 netmask 0xffffff00 broadcast 10.10.200.255
media: Ethernet autoselect (10Gbase-Twinax <full-duplex>)
status: active
nd6 options=9<PERFORMNUD,IFDISABLED>
I am running ZFS over iSCSI
NAS has 3 NICS 2 10Gbit and one 1GBit
10Gbit connections are DAC without router.
So NAS has two Portal IPs since each nodes 10Gbit connection is on its own Subnet.
This makes me not being able to create a shared. But i cant have them as individual storages either going to the same....
Can anyone advice me...
Setup (Dont worry about no carrier they have connection...now...)
NOD 2
2: ens2f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
altname enp97s0f0
inet 10.10.100.12/24 scope global ens2f0
valid_lft forever preferred_lft forever
NOD 1 (BAJS)
2: ens2f0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
altname enp97s0f0
inet 10.10.200.12/24 scope global ens2f0
valid_lft forever preferred_lft forever
NAS
ixl0: flags=8863<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
description: Storage 10gb node 2
options=4e507bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6,NOMAP>
ether x
inet 10.10.100.11 netmask 0xffffff00 broadcast 10.10.100.255
media: Ethernet autoselect (10Gbase-Twinax <full-duplex>)
status: active
nd6 options=9<PERFORMNUD,IFDISABLED>
ixl1: flags=8863<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
description: 10gbit node 1
options=4e507bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6,NOMAP>
ether x
inet 10.10.200.11 netmask 0xffffff00 broadcast 10.10.200.255
media: Ethernet autoselect (10Gbase-Twinax <full-duplex>)
status: active
nd6 options=9<PERFORMNUD,IFDISABLED>